User's Manual

WHAT TO DO WITH YOUR NEW FOAM BRICK
The foam brick you are holding is the end result of an indecisive creative director and two pushed deadlines. In a perfect
world, you would be holding a custom-molded foam enclosure with a high-tech, heat-treated texture that mimics Ohm's sleek
aesthetic. Basically, it was supposed to look really freaking cool. Instead, you got this weird foam brick. But in the interest of
looking at the bright side and saving the world, please consider the above uses to give your weird foam brick a second life.
Beverage Barge
Horrible Boat Anchor
Igloo Patch
Tortilla Warmer
Vertical Optimization Device
Hamster Wrestling Ring
New Friend
Robot Jockstrap
Pet Coffin
Ninja Dartboard
Goth Loofah
Emergency Umbrella
OHM
portable speaker
wireless charging dock
Ohm was invented by
María Morrill, a homemaker
from Bayamon, Puerto Rico.
While doing research on which portable
speaker to buy, Maria found herself
underwhelmed by the options.
This busy stay-at-home-mom challenged
herself to invent something better… and
now she and her family take their tunes
to go with Ohm.
It all started with
María’s concept
Submitted to Quirky in May ‘10
And now you have Ohm!
Like all Quirky products, Ohm was
invented and influenced by real
people like you.
Ordinary people with extraordinary
imaginations submit ideas to
Quirky every day, then we
collaborate with our online
community to make the best of
those ideas a reality. When a
product is sold, we share a cut of
the revenue with all those who
had an impact.
HOWQUIRKYWORKS
Submityouridea
Helpusdecide
Influenceandearn
Wemakeitreal
Theworldprospers
Submityourproductideato
1901
influencers helped
bring María’s idea to life.
USING OHM
• To turn on/off: press and hold power button.
• To toggle play/pause: press play/pause button.
• To adjust volume: press +/- button.
(16 volume levels)
• To operate speakerphone:
• press play/pause button to answer
an incoming call.
• press and hold play/pause button to
reject an incoming call or end a call.
• press play/pause button while on a call
to toggle mute/unmute.
• Ohm will make a sound when the battery
reaches 25% charge and 10% charge states.
• Ohm will automatically turn off if the battery
becomes too hot during charge or if the
battery reaches a critical low.
• Ohm’s USB charging output will be reduced
from 2.1 A to 1 A if all charging ports are
in use at once.
FEATURESANDFUNCTIONS
• 5 watts total power output
• Dual drivers, single passive bass radiators
• Wireless charging docking pad for
Qi compatible devices
• Wirelessly connects to Bluetooth® v4.0
devices for playback
• Integrated microphone for speakerphone
functionality (with dual microphone
noise cancellation)
• Wireless range up to 30 .
• 6-8 hours of continuous playback on
fully-charged battery
• 1 high-powered USB port on charging dock
• 1 Micro-USB port on speaker
• Voltage range 100~240V AC (50Hz~60Hz)
ALSOINTHEBOX
• 2’ 3.5mm auxiliary cable
To connect your non-Bluetooth® device
• 1’ USB to Micro-USB cable
To charge the speaker without the dock
• AC power adapter wall plug
To power the charging dock
M
a
r
í
a
M
o
r
r
i
l
l
I
N
V
E
N
T
E
D
B
Y
R
E
A
L
P
E
O
P
L
E
L
I
K
E
Y
O
U
CONNECTINGTOYOURBLUETOOTH®DEVICE
1 Turn on Bluetooth® from your device.
2 Press and hold the power button on Ohm. You
will hear a sound when it turns on.
3 Place your device close to the Ohm speaker.
4 Press and hold the Bluetooth® button on the
Ohm speaker until you hear a sound. The
LED light will be flashing as it connects.
5 From your device, select “Ohm” from the
list of Bluetooth® devices and wait for a
confirmation sound from Ohm.
6 Once you hear the confirmation sound, Ohm
is connected to your device. If Ohm does
not connect, press and hold the Bluetooth®
button to repeat the pairing process.
7 Once connected, you will be able to control
music from your device wirelessly within
a 30 . range.
CONNECTINGTOANONBLUETOOTH®DEVICE
• Use the included 3.5mm auxiliary cable to
connect Ohm to your non-Bluetooth® device.
UNDERSTANDINGOHM’SSIGNALS
• When Ohm is fully charged and power is ON,
the LED white light will be on.
• When charging, the LED white light will flash evenly.
• If power is turned OFF, the LED light will
remain on for 10 seconds, then fade off.
• Aer 10 minutes of inactivity, Ohm will
automatically turn off to conserve battery life.
• When the battery becomes too hot or reaches
a critical low, the power light will turn red and
Ohm will turn off.
IMPORTANTSAFETYINFORMATION
Read all instructions and warnings prior to using Ohm.
Failure to comply with instructions and warnings constitutes
improper use of Ohm. Save all instructions.
Quirky, Inc. is not responsible for improper use, which may
result in personal injury or product damage. Quirky, Inc. is
not responsible for any damages one may suffer as a result of
use, intended or unintended.
Keep away from children.
CAUTION: RISK OF ELECTRIC SHOCK.
Do not expose device to liquid, moisture, humidity, or rain.
Do not use near a bathtub, sink, sauna, pool, or steam room.
Do not place objects filled with water, such as a vase, on the
device.
CAUTION: RISK OF FIRE OR EXPLOSION.
Do not expose to excessive heat such as sunshine, open
flame or other heat sources. Do not dispose of device in fire,
as explosion may occur.
Do not block any ventilation openings.
Clean only with a dry cloth. Do not clean device while
being charged.
Use only accessories and attachments as supplied and
designated in the instructions.
Do not attempt to modify or disassemble device. There are
no user-serviceable parts. Refer all servicing to qualified
personnel. Unplug this device during lightning storms or
when unused for long periods of time.
Store in a cool, dry place.
FCCWARNING
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
LIMITEDONEYEARWARRANTY
Quirky, Inc. (“Quirky”) Original Purchase Product Warranty:
Quirky warrants to the original purchaser (“Purchaser”) of this
Quirky product, for the period of one (1) year following the
date on which Purchaser purchases the product, that the
product shall be free of defects in design, assembly, material,
or workmanship.
Quirky will refund or replace, at its option, any defective
product free of charge.
In order to qualify for this warranty, the Purchaser must
provide the defective product and a copy of the original
receipt of purchase to Quirky for inspection. The receipt of
purchase must indicate the product purchased, price paid,
date of purchase, and name of merchant.
To request service under this warranty, contact Quirky at
866-5-QUIRKY or [e-mail] and a Quirky
representative will provide instruction on how to proceed.
This warranty shall be null and void if Quirky determines that
the product has been improperly installed, altered or tampered
with in any way. This warranty does not protect against normal
use, wear and tear, or damage due to abuse.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF
QUIRKY. THERE ARE NO OTHER WARRANTIES, EXPRESSED
OR IMPLIED, INCLUDING THE IMPLIED WARRANTY OR
CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED
WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE
TERM OF THIS WARRANTY. IN NO EVENT SHALL QUIRKY
BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT
OR CONSEQUENTIAL DAMAGES SUCH AS, BUT NOT
LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT
OF THE SALE OR USE OF ANY QUIRKY PRODUCT, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some jurisdictions do not allow exclusions or limitations
on implied warranties or incidental, consequential or other
damages, so the above exclusions and limitations may
not apply to you.
COPYRIGHTANDTRADEMARKNOTICE
Subject to copyright protection. ©2014. All rights reserved.
Quirky is a registered trademark of Quirky, Inc.
Bluetooth® is a registered trademark of Bluetooth® SIG.
Qi is a registered trademark of Wireless Power Consortium.
Image of Motorola Droid Mini is a registered trademark of
Motorola Trademark Holdings, LLC. *Smartphone not included.
SUPPORT
Need help?
[e-mail]
1-866-5QUIRKY
 
Power button Bluetooth® button Play/Pause button
3.5mm line-in
(on side)
USB input
(on side)
USB output
(on back)
Volume +/- button
CUT
SCORE
PART # : R-INS-OHMM-XUS
STOCK : 157gsm C2S, Matte UV
FLAT DIMS : 332 x 525 mm
RSS-Gen Issue 3 December 2010"&"CNR-Gen 3e éditionDécembre 2010:
- English:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
- French:
Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitationestautorisée aux deux
conditions suivantes:
(1)ÿl'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi,
mêmesi le brouillageest susceptible d'encompromettre le fonctionnement.
"This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 centimeters between theradiator and your body."