Product Brochure

Quiet-One Kickspace Heaters
by Smith’s Environmental Products
Designed For Those Hard To Heat
Areas Of Your Home
Quiet-One Kickspace Heaters
by Smith’s Environmental Products
Designed For Those Hard To Heat
Areas Of Your Home
ENVIRONMENTAL PRODUCTS
300 Pond St., Randolph, MA 02368 | [phone] | Fax [phone] | www.SmithsEP.com
Flow Pressure
Unit Rate Drop
Entering Water Temperature (Deg. F.) - BTU/hrs.
G.P.M. (ft.) 130 140 150 160 170 180 190 200 210
1 0.06 2095 2410 2700 3000 3350 3650 3860 4000 4105
KS
3 0.422 2240 2650 3000 3350 3765 4120 4350 4530 4635
2004
5 1.026 2350 2755 3140 3530 3940 4330 4590 4810 4935
1 0.12 3410 4050 4655 5265 5860 6330 6700 7110 7270
KS
3 1.19 3735 4395 5060 5735 6330 6825 7120 7530 7790
2006
5 2.6 3860 4540 5225 5910 6560 7030 7415 7800 8010
1 0.12 4300 5000 5765 6500 7370 7960 8400 8735 8920
KS
3 1.19 4580 5380 6195 7050 7930 8610 9010 9445 9740
2008
5 2.6 4760 5625 6450 7290 8200 8925 9360 9785 10020
1 0.41 5530 6350 7150 7975 8780 9465 9975 10330 10520
KS
3 2.78 5880 6710 7740 8710 9625 10540 11060 11530 11740
2010
5 3.92 6070 7030 8000 9030 10025 10920 11525 11995 12180
• As part of our continuous product improvement, Smith’s Environmental Products reserves the right to alter specications without notice.
• For low speed ratings use: .85 for the KS2004, .75 for the KS2006, .70 for the KS2008, and .65 for the KS2010.
• Heat throw: KS2004 = 10 ft. @ 50 CFM; KS2006 = 10 ft. @ 75 CFM; KS2008 = 10 ft. @ 90 CFM; KS2010 = 10 ft. @ 125 CFM.
Capacity for the Quiet-One 2000 Kickspace Heaters - BTU/HR @ 65°F Entering Air
Wt.(lbs.)
KS 2004 10
7
⁄8" 13
7
⁄8" 13
7
⁄8" 3
1
⁄2" 9
KS 2006 10
7
⁄8" 13
7
⁄8" 20" 3
13
⁄16" 10
KS 2008 10
7
⁄8" 13
7
⁄8" 20" 3
13
⁄16" 10
KS 2010 14
13
⁄32" 17
23
⁄32" 23
5
⁄8" 4" 14
Fan Convector/Baseboard Comparison
At 200°F EWT; 20°TD At 650 BTU/FT Low Pressure Steam
Model# Baseboard C.I. Radiators
KS 2004 6.97 linear ft. 18.9 square ft.
KS 2006 11.6 linear ft. 31.4 square ft.
KS 2008 14.5 linear ft. 39.3 square ft.
KS 2010 17.8 linear ft. 48.0 square ft.
Dimensions
Model # A B
C
D
Construction: The one piece chassis is manufactured from high grade zinc
coated steel. The grille and exposed parts of the chassis are painted with a
copper/brown baked enamel nish.
Heat Exchanger: A highly ecient, headered coil, made of copper tubes expanded
into smooth aluminum plate ns (10 FPI), tested at 300 PSI, and sealed for quality.
The heat exchanger is positioned in the unit for maximum heat transfer over the coil.
Fan and Motor Assembly: High spec tangential EBM fan and motor assembly
consists of high static fan wheel and scroll, detachable motor, replaceable
“easy glide” sleeve bearings, and the fan and motor cut out are protected to UL/CSA
specications. This fan and motor assembly is designed to enhance the “coanda”
eect, and to run whisper quiet without vibration.
Controls: The KS units have an integral two speed, max.-o-min., fan switches
(optional wall mounted fan speed controller is available). The LTC —low limit
aquastat is also a high spec item with a close tolerance designed to close on a rise
to 110° F+/-3° F and open at 90° F+/-3° F.
Water Connections: Supply and return connections are 1 ⁄2" sweat connections
located to the right of the unit as you face the grille. An air vent with wide
convenient screwdriver slot is accessible through the grille.
Electrical Connections: 120/60/1 power supply is required. All that’s required is to
knock out the junction box hole you want to use and wire to the L1 and L2 leads.
There is a convenient one screw access plate on the top of the unit to get at the ground.
QUIETONE
BY SMITH’S ENVIRONMENTAL PRODUCTS
™
QUIETONE
BY SMITH’S ENVIRONMENTAL PRODUCTS
™
Perfect for
kitchens!
Whisper Quiet Ecient
Operation
Four Sizes To Choose From
Installer Friendly
Easily Fits Into Tight Spaces
Decorative Grilles Available In
Brown, Gold, White, Silver & Chrome
5 Year Warranty