Specification

PORTABLE CAR LIFT SYSTEM

The BL-7000SLX is our heaviest-duty portable car and truck

lift system. A reinforced upper frame rails give this lift enough

strength to eortlessly raise light-duty trucks and SUVs. For

higher ground-clearance vehicles, don’t forget to pick up our

exclusive truck adapter set. The extra spacers will oer an

additional 6” of lifting height!

Automatic safety locks

Lower and upper safety locks automatically engage as the car

lift frames rise. They quickly disengage with a simple ip of the

lock bar. They’re like built-in, heavy-duty jack stands. (But cool.)

Zero-leak ttings

Even when the car lift frames are under a full 7,000-lb. load,

the hydraulic connectors do not leak. Keep your nice garage

ooring clean and oil-free.

Reinforced upper frame rails

For the BL-7000SLX, our largest-capacity QuickJack car lift

system, we reinforced the upper frame rails of with box-welded

steel. This signicantly minimizes deection, improving power

without requiring longer frames.

Open-center design

The BL-7000SLX is all about more power with less interference.

Inspired by two-post car lifts that engage vehicle frames, our

open-center design oers full access to your vehicle’s wheels

and undercarriage.

QuickJack is protected by one or more patents in the United States, China, Europe, and other countries.

BL-7000SLX SPECIFICATIONS

Lifting capacity 7,000 lbs. (3,175 kg)

Lowered height 3.5” (89 mm)

Max. lifting height 21.5” (546 mm)

Lifting point spread 29.5” - 60” (749 mm - 1,524 mm)

Frame width 12.5” (318 mm)

Frame length 71” (1,803 mm)

Frame weight 96 lbs. (44 kg)

Power unit weight 35 lbs. (16 kg)

Shipping weight 242 lbs. (110 kg)

BL-7000SLX