User Manual Video Doorbell QUHWA VP-K
I. Packing List A. Video door phone host: 1 B. Mounting wrench: 1 C. Manual: 1 D. Host support: 1 E. Hex screw: 2 F. Screw expansion plug: 5 G.
II.
2) Rear View A: Support fastener B: Reset button C: NO (normally open) D: GND (ground) E: NC (normally connected) FG: AC / DC H: Product Label I: Micro SD Connection instructions: (NO + GND): to magnetic lock (NC + GND): to electric lock AC/DC: to AC 8-16V or DC 9-24V, without polarity difference Micro SD: installed/removed in power off state, with a maximum of 64G supported.
settings. The device will restart with a prompt tone upon completion. 3) Host support 1: Screw fixing hole; 3: Fastener hole.
III.
IV. Downloading APP Search in application market for tilvision V.
VI. Adding equipment 1) Power on the device and wait for the system prompt tone. Device startup completed, before adding the device, make sure the mobile phone has been connected to the 2.4G WIFI network. 2)Open the tilvision app and click "+",Click the Setup device button and enter the Wi-Fi password.
3)Long press the doorbell indicator light, release after the "di-di-di…" tone 4) Warning tone two times will be presented during the configuration process: a) The first beep tone indicates success of the device to obtain wifi information; b) The second whistle indicates success of device configuration.
5) Search the configuration results. VII. Main function 1) Call answering When a visitor presses the call button, the indoor ding-dong machine (optional) ring out, and the mobile terminal receives the call information at the same time. Open the software, the call window is displayed against the background of a visitor picture.
unlock and reject. 2) PIR alarm mode When going out (or at night fortification) and the PRI monitoring mode is turned on, upon detection of someone stops at the doorway, the mobile terminal will receive the alarm screen with a screenshot of the visitor as the background, and at the same time the mobile terminal will emit audio warning to remind the owner to answer or monitor.
Main product parameters Product Name: WIFI Video Doorbell Product Model: VP-T10 Video angle range: 120° Video compression: H.264 Video pixels: HD720P Audio: Two-way voice intercom, comes with echo cancellation Loudspeaker: 1W PIR distance: 3 meters detection Day-night mode: Automatic switching between photosensitive sensors and between IR-CUT dual filtering Night infrared lamp: 5 Wireless connection: WIFI 2.4GHz, IEEE 802.
Working with auto-learning code wireless indoor chime Once the video doorbell and indoor chime are powered in 20seconds,press the call button to complete configuration. The indoor chime will sound if visitor rings the video doorbell in case the smart phone is not available.
Functions Instruction 1.Press the auto‐learning code button on the side of the Receiver and hold for 2 or 3 seconds, A “beep” sound comes out and the LED indication will light. Then press the call button on the video doorbell once. The Receiver will sound to indicate that new operation code is registered and memorized. Thus the video doorbell works successfully with the indoor chime. Maximum 60 codes can be matched and saved in the chime within 10 seconds.
Note: You must select the desired ring first, then match the video doorbell. If you want to change ring tones, you must delete all the information saved in the chime and reset. Press the melody selector button and hold for 5 seconds, you can delete all the information within the chime. At the same time, the LED indicator light will light. 3.There is also a volume button on the side of the Receiver (see diagram). Press it to adjust the sound volume, total six levels. 4.
FCC Caution: This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment.