MULTIPURPOSE CORDLESS CALLING SYSTEM .PEFM -.
PRODUCT ྙ ྚ ྛ ྜ ྙ DISPLAY ྚ BUTTON : Application(press three seconds) , moved next digit (message) ྛ BUTTON : Moved next menu, increased numbers ྜ ON/OFF s/w OFF ON ICON MESSAGE NUMBERS VIBRATION MELODY MESSAGE DELETE LOW BATTERY NEXT MESSAGE(RECEIVED OVER 2 MESSAGES) LM-D100US FUNCTIONS Received 8 message Displayed number and alphabet Displayed 5 digits alphabet message or numbers Delete message Low battery 3 alams : melody/vibration/no sound 8 melodys : (melody : 1~6 , vibration: 7~8) DISPLA
MENU Off Exit Melody setting, vibration Pager’s group setting LM-T100 Max. 2 groups (1,2) LM-T910 Max. 2 groups (3,4) Refer to 00 page Call from LM-T100 4numbers(1,2,3,4) Call from LM-T910 4numbers(5,6,7,8) Pager’s ID & numbers setting Refer to TO 00 page Save OK Finished application, so restarted * If during passed 1 minute without pressed any keys and restarted automatically. Input charger (LM-C100) . POWER ON 1. S/W moved to right ˧ 2.
MELODY 0'' 0/ S/W ON Pressed any key 2 sedonds POWER ON : Moved next menu, Increased number : Moved next digit, Application (pressed 2 seconds) Press 2 keys during 2 seconds, so find in display ⲻ /P QSFTTFE XJUIJO TFDPOET TP PGG BVUPNBUFDBMMZ vibration setting Moved menu 3 TFUUJOH NFMPEZ BOE WJCSBUJPO ʙí Ⅹ 1: setting 0: cancel melody setting 1: setting 0: cancel ʙí Ⅹ melody number setting ʙí Ⅹ 0: 1: 3: 5: 7: No sound GALSALABOSE 2: LACUKARACHA SANTALUSIA 4: Beep 1 Beep 2 6: Beep 3 Vibration 1
example) Received the message with vibration and SANTALUCHIA melody : Moved next menu, Increased number : Moved next digit, Application (press 2 seconds) Setting melody 0'' 0/ ON Vibration 1:on ( 2 seconds) 0:off Melody 1:on (2 seconds) 0:off Melody’s kinds 0-8 (2 seconds) setting Alam setting 1:on (2 seconds) 0:off Setting melody
SETTING GROUP (Call from LM-T910) Group is prevented to received another transmitter’s numbers All receivers and transmitters are working with same group All receivers and transmiters are set group : Moved next menu, Increased number Move menu 4 setting group : Moved next digit, Application (presse 2 seconds) Group setting SETTING NUMBER : + SETTING 2: Setting group From LM-T100 0-15 GROUP (2 SECONDS) SETTING NUMBER : SETTING 2: (2 SECONDS) + Setting group from LM-T910 1-32 GROUP (
GROUP SETTING HAVE 2 GROUPS : Moved next menu, Increased number . ONLY 1 GROUP SETTING : Moved next digit, Application (press 2 seconds) (1 Group 1) Setting number : Setting 2: . 2 GROUPS SETTING (2 SECONDS) (1 AND 3 Group) .
Example) Group setting of LM-T100 about 10 : Moved next menu, increased number (~FROM .
number setting (call from LM-T100) : Moved next menu, Increased number moved menu 5 set the number of pager : Moved next digit, Application (press 2 seconds) SETTING NUMBER SETTING : : (press 2 seconds) SETTING NUMBER SETTING : set number from LM-T910 : ( ( (~from . ~to) SET THE GROUP NUMBER AND GROUP RANGE.
example) 10 number setting from LM-T910 : Moved next menu, increased number (~from .
EXIT ㍌㐔O㇄㇄Pⶼ䝬 ⷈ㠸㉘㥉G⮈⎨ You must SAVE the menu GGGGGGGGGⷴᷱ⇨㟝G㢼㡸⚀ 㣄┍Gylzl{G䖐㐐䟸Gvu˧vmm╜ ⷴᷱ⇨㟝G㛺㡸⚀ ⮈⎨㉘㥉㡸G⾔㥬⇌ᵄ set menu confirm the message moved message comfirm the message delet the message press 2 seconds blinked the icon press 2 seconds(delete)
FCC ID : V6OLMD100US ** USER INFORMATION Acknowledging Special Precautions and the FCC Industry Canada Notice Cautions Modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance Information When used the This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received.
x|mplskGjvUSs{kUGoGvm Ga YW_GtG} SG^``Gn YTSGkTSGh TSGn {lsGaGX\__T``\^GG