Quext IoT User Manual Contents Getting Started ��������������������������������������������������������������������������������������������������������������3 Contact Info ������������������������������������������������������������������������������������������������������������������������������������������������ 3 Installing the Quext IoT App ���������������������������������������������������������������������������������������������������������������������������� 3 Thermostat Overview ��������������
Quext IoT User Manual Getting Started This guide will show you how to operate your Quext smart thermostat and door lock using manual controls as well as the Quext IoT mobile app and website. Contact Info If you experience any problems using your IoT technologies, use the Contact Us link in the Quext IoT app, or instantly chat with or email Quext support at help.quext.io. Available chat hours are M-F, 9:00am-12:00pm and 1:00pm-5:00pm Central Standard time.
Quext IoT User Manual Indicators The table below describes each indicator on the thermostats display Indicator Description Indicator ▪ Solid: Connected to the network Description Thermostat mode ▪ Flashing: Attempting to connect ▪ COOL: The system cools to the set temperature ▪ Dark: No network connection Property control mode; contact Property Management ▪ HEAT: The system heats to the set temperature Power issue; contact Property Management ▪ AUTO: The system maintains the temperature between
Quext IoT User Manual Manual Controls Thermostat Use the thermostat dial to select options on the display. Turn the dial to highlight different options. Press and release the dial to select the option that is currenly highlighted. The control menu below is the starting point for many functions. From left to right, the control menu icons are System mode, Fan and Settings. Setting the thermostat mode The thermostate has four operating modes: COOL, HEAT, AUTO and OFF. To turn the thermostat off: 1.
Quext IoT User Manual Use HEAT mode to prevent the temperature from falling below a set point: 1. Press the dial once to highlight the control menu. 2. Turn the dial to highlight System mode , then press the dial to select it. 3. Turn the dial to highlight HEAT on the system mode menu, then press the dial. 4. Turn the dial to select the desired temperature, then press the dial. 5.
Quext IoT User Manual To run the fan periodically in order to circulate air: 1. Press the dial once to highlight the control menu. 2. Turn the dial to highlight Fan , then press the dial. 3. Turn the dial to highlight CIRC on the Fan mode menu, then press the dial. 4. Turn the dial to select the number of minutes to run the fan each hour (in 5-minute increments), then press the dial. 5.
Quext IoT User Manual Overview of the App The Home Page shows the current temperature, thermostat settings and smart lock controls. You can adjust temperature setting from the Home Page. Drag the circule on the slider, or tap a point on the slider path. When AUTO mode is active, move the two slider circles to the lower and upper points of the desired temperature range.
Quext IoT User Manual Settings Save password: When selected, the app does not require you to enter your password. To maintain security, biometric authorization is used instead of the password. (Biometric identification must be set up and enabled on your device.) Change Pin Code: Enter a new PIN code to access the app. Lockout interval: Select the length of time before lockout when the app is idle.
Quext IoT User Manual Setting up Thermostat Schedules Use the Quext IoT app to create “events” — thermostat operations that occur on scheduled days and times. An event has a start time but no end time. Each event on the schedule ends when the next event begins. While an event is in progress, Smart mode is active. Any manual changes to the temperature and fan settings are temporary overrides before scheduled operation resumes. Create an event 1. On the Quext IoT app Home Page, tap the thermostat. 2.
Quext IoT User Manual Using the Quext IoT Website Dashboard Overview Welcome to your dashboard! It shows your home’s current temperature, thermostat settings/schedule(s) and smart lock property activity and home door access histories.
Quext IoT User Manual Regulatory Information Per FCC 15.19(a)(3) and (a)(4), this device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The FCC regulations provide that changes or modifications not expressly approved by Quext LLC could void your authority to operate this equipment.