GL501MG GL501MG_T GL501MG_S User Manual Version: 1.
GL501MG GL501MG_T GL501MG_S User Manual Contents 0. Introduction .................................................................................................................................. 1 1. Product Overview .......................................................................................................................... 2 1.1. Product Appearance ........................................................................................................... 2 1.2. Key Description..............
GL501MG GL501MG_T GL501MG_S User Manual 0. Introduction GL501MG GL501MG_T GL501MG_S is an IP67 waterproof GNSS tracker that features up to 900 days standby time powered by internal batteries and supports wireless charging. The device is ideal for lot management and other tracking applications that require real-time monitoring on temperature and light. GL501MG GL501MG_T GL501MG_S supports LTE Cat M1/NB1 network on multiple bands for operation in America, Europe, and Oceania with a fallback to GPRS.
GL501MG GL501MG_T GL501MG_S User Manual 1. Product Overview 1.1. Product Appearance Light Tamper Sensor LEDs Light Alarm Sensor Key Figure 1. GL501MG GL501MG_T GL501MG_S Product View 1.2. Key Description Table 1.
GL501MG GL501MG_T GL501MG_S User Manual 2. Getting Started 2.1. Opening and Closing the Case Figure 2. GL501MG GL501MG_T GL501MG_S Screw Position To open/close the case: Unfasten or tighten the 4 screws at backside. 2.2. Turning on/off the Device Power Key Figure 3. GL501MG GL501MG_T GL501MG_S Battery Switch and Key To turn on: Long press the key for more than 3 seconds. To turn off (needs to be configured): Long press for more than 3s after power on.
GL501MG GL501MG_T GL501MG_S User Manual 2.3. Installing a SIM Card SIM Card Holder Figure 4. GL501MG GL501MG_T GL501MG_S SIM Card Holder Power off the device first and then install the SIM card.
GL501MG GL501MG_T GL501MG_S User Manual 3. Installation Precautions Firmly install the device to a reliable surface to prevent falling off. Make the side with antenna face sky to have better signal reception. Do not install the device under metal surface or in enclosed environments having difficulty in getting GPS and network signal.
GL501MG GL501MG_T GL501MG_S User Manual 4. Troubleshooting and Safety Info 4.1. Troubleshooting Table 2. GL501MG GL501MG_T GL501MG_S Troubleshooting List Trouble Possible Reason Solution After the device is turned on, the Status LED always flashes quickly. The signal is too weak. The device isn’t registered to the network. Please move the device to a place with good network coverage. APN is not right. Ask the network operator for the right APN. The IP address or port of the backend server is wrong.
GL501MG GL501MG_T GL501MG_S User Manual -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
