GMT200 User manual GMT200 GSM/GPRS/GPS Tracker User Manual TRACGMT200UM001 Revision: 1.00 TRACGMT200UM001 http://www.queclink.com -10sales@queclink.
GMT200 User Manual Document Title GMT200 User Manual Version 1.00 Date 2016-09-13 Status Release Document Control ID TRACGMT200UM001 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers.
GMT200 User Manual Contents 1. Introduction ................................................................................................................................... 7 1.1. Reference............................................................................................................................. 7 1.2. Terms and Abbreviations ..................................................................................................... 7 2. Product Overview ......................................
GMT200 User Manual Table Index TABLE 1: GMT200 PROTOCOL REFERENCE .................................................................................... 7 TABLE 2: TERMS AND ABBREVIATIONS ......................................................................................... 7 TABLE 3: PART LIST ............................................................................................................................. 9 TABLE 4: DESCRIPTION OF GMT200 USER CABLE.............................................
GMT200 User Manual Figure Index FIGURE 1. APPEARANCE OF GMT200 ......................................................................................... 8 FIGURE 2. SIM CARD INSTALLATION ....................................................................................... 10 FIGURE 3. TYPICAL POWER CONNECTION............................................................................. 11 FIGURE 4. TYPICAL IGNITION DETECTION ..........................................................................
GMT200 User Manual Revision History Revision Date Author Description of change V1.
GMT200 User Manual 1. Introduction The GMT200 is a water resistant GPS tracker designed for applications requiring low current drain such as motorcycles and boats. Its built-in GPS receiver has superior sensitivity and fast time to first fix. Its quad band GPRS/GSM subsystem supports 850/900/1800/1900 MHz allowing the GMT200's location to be monitored in real time or periodically tracked by a backend server and mobile devices.
GMT200 User Manual 2. Product Overview 2.1. Appearance Figure 1.
GMT200 User Manual 2.2. Parts List Table 3: Part List Name Picture GMT200 Locator DATA_CABLE_M(Optional) 2.3. Interface Definition There are 5 wires on GMT200 User Cable which contain the connection for power, ignition input, digital input, digital output etc. The user cable’s definition is shown in following table.
GMT200 User Manual 3. Getting Started 3.1. Installing a SIM Card Step 1: Step 2: Step 3: Remove the cover. Insert the SIM Card into the SIM card holder. Compress the SIM card cover. Figure 2.SIM Card Installation 3.2. Switch the device on/off There are two methods to Power on GMT200: - Use external power to turn on. - Connect GMT200 to PC with user cable. When the external power or USB cable removed,GMT200 will switch to internal backup battery and keep on running.
GMT200 User Manual There is one method to turn off GMT200. -Remove the external power and USB power. -Press the reset key. Note: GMT200 PWR LED will be off. 3.3. Reset Key There is a reset key behind the SIM card cover. If the power wire is connected to vehicle power, the system will reboot when the key is pressed; if the system is powered by the backup battery and the power wire is not be connected to vehicle power, the system will shutdown when the key is pressed.
GMT200 User Manual 3.6. Ignition Detection Table 5: Electrical Characteristics of Ignition Detection Logical State Electrical State Active 5.0V to 32V Inactive 0V to 3V or Open Figure 4. Typical Ignition Detection The white wire is used for ignition detection. It is strongly recommended to connect this wire to ignition key “RUN” position as shown up. An alternative to connecting to the ignition switch is to find a non permanent power source that is only available when the vehicle is running.
GMT200 User Manual Figure 5.Typical Digital Input Connection 3.8. Digital Output There is a Digital Output for relay on GMT200, and it is low side 150mA max with latch .It can be connected relay which maximum switching voltage is 12VDC and maximum continuous current is 20A. Note: 1: The relay output can be latched by the software, so even if the GMT200 is restart or power down in some cases, the relay output will not change. To use the latch function the main power and backup battery should be connected.
GMT200 User Manual 3.9. Device Status LED Figure 7.
GMT200 User Manual Table 7: Definition of Device status and LED LED Device status LED status CEL (note1) Device is searching GSM network Fast flashing (Note3) Device has registered to GSM network. Slow flashing (Note4) SIM card needs pin code to unlock. ON GPS chip is powered off OFF GPS sends no data or data format error. Slow flashing GPS chip is searching GPS info. Fast flashing GPS chip has gotten GPS info. ON No external power and backup battery voltage is lower than 3.35V.
