WCDMA Tracker GL300W User Manual TRACGL300WUM001 Version:1.
GL300W User Manual Document Title GL300W User manual Version 1.00 Date 2015‐5‐25 Status Release Document Control ID TRACGL300WUM001 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers.
GL300W User Manual Contents Contents ............................................................................................................................................ 2 0. Revision history ............................................................................................................................ 3 1. Introduction ................................................................................................................................... 0 2. Product Overview ..............
GL300W User Manual 0. Revision history Revision Date Author Description of change 1.00 2015/5/25 Hazard.
SuperEasy GSM Module User Manual 1. Introduction The water resistant GL300W is a powerful GPS locator designed for lone worker, vehicle, pet and asset tracking applications. The thumb sized button makes this device ideal for applications requiring rapid notification of emergency alert or regular setting of geo-fences based on current location. Its built-in GPS receiver has superior sensitivity and fast time to first fix.
SuperEasy GSM Module User Manual 2. Product Overview 2.1. Appearance 2.2. Buttons/Mini USB Interface Description Button /Mini USB Interface Description Power Key Turn on GL300W Turn off GL300W when without charging. (If power key is enabled) Function Key Geo‐Fence mode Long press the key to enable/disable Geo-Fence ID0 Geo‐Fence in current position mode Long press the key to enable/disable Geo-Fence ID0. If enable Geo-Fence ID0, using the current position as the center of Geo-Fence 0.
SuperEasy GSM Module User Manual 2.3. LEDs Description There are three LED in GL300W, the description as following. LED CELL LED Searching network State Fast flash GPS LED Network has been registered Power off SIM-PIN Locked is 2 GPS has fixed Slow flash Dark Solid Dark Solid GPS is in fixing Fast flash GPS is on and GPS data wrong Slow flash GPS is off Dark If is 0, 150 seconds later after powers on.
SuperEasy GSM Module User Manual 2.4.2. External Battery Interface The Pin 8 on Mini-USB connector is for external battery and named as EXTBAT pin, It can be connected to 3.7V Li-ion or Li-Polymer battery to power GL300W. 2.5. Ignition Detection The Pin 7 on Mini-USB connector is for ignition detection when GL300W is used in vehicle tracking application, It is named as IGN_IND pin.
SuperEasy GSM Module User Manual For negative trigger input the electrical conditions are: Logical State Active Inactive Electrical State 0V to 0.8V 1.7V to 32V or Open An input example is shown as following figures: Example of NSW pin connect to a panic button 3. Getting Started 3.1. Parts List Name Picture Remark GL300W Locater The locator. AC‐DC Power Adapter (Standard accessory) It is used to charge the internal battery of GL300W.
SuperEasy GSM Module User Manual GL300W Data Cable (Optional accessory) It is the USB data cable which can be used for firmware upgrading and configuration. GL300W External Cable (Optional accessory) It is the extend cable which include the charger interface and external battery interface on GL300W. It also includes the ignition detection interface on the GL300W. 3.2. Battery Charging Please connect AC‐DC power adapter with GL300W. Insert the AC‐DC power adapter into the power socket.
SuperEasy GSM Module User Manual White Ignition Detect Please refer to 2.5for detail Green NSW（negative trigger input） Please refer to 2.6 for detail 3.4. Turn on/Turn off Turn on: Method 1: Press the Power key at least 3 seconds and release it to turn on GL300W. At the same time, PWR LED will light on. Method 2: Connect device to charger or external battery, and it will turn on automatically, PWR LED will light on.
SuperEasy GSM Module User Manual 4. Troubleshooting and Safety info 4.1. Troubleshooting Trouble Possible Reason Solution After GL300W is turned on, the WCDMA LED flashes quickly always. The signal is too weak; GL300W can’t register to the network. Please move GL300W into place with good WCDMA coverage. Messages can’t be reported to the backend server by GPRS. APN is wrong. Some APN cannot visit the internet directly. Ask the network operator for the right APN.
SuperEasy GSM Module User Manual WARNING: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
