GSM/GPRS/GPS Tracker GL300 User Manual TRACGL300UM001 Revision: 1.01 http://www.queclink.com sales@queclink.
GL300 User Manual Document Title GL300 User manual Version 1.01 Date 2013-06-25 Status Release Document Control ID TRACGL300UM001 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers.
GL300 User Manual Contents Contents ............................................................................................................................................ 2 0. Revision history ............................................................................................................................ 3 1. Introduction ................................................................................................................................... 4 2. Product Overview ...............
GL300 User Manual 0. Revision history Revision Date Author Description of change 1.00 2013-04-18 Tony PEI Initial 1.
GL300 User Manual 1. Introduction GL300 is a powerful GPS Tracker designed for asset, vehicle, and pet tracking. With superior receive sensitivity, fast TTFF (Time to First Fix) and Quad band GSM frequencies 850/900/1800/1900, its location can be continuously monitored or periodically reported to a backend server or other device.
GL300 User Manual 2. Product Overview 2.1. Appearance PWR LED GSM LED GPS LED Function Key MiniUSB Interface Power Key SIM Card Slot 2.2. Buttons/Mini USB Interface Description Button /Mini USB Interface Description Power Key Turn on GL300 Turn off GL300 when without charging. (If power key is enabled) Function Key Geo-Fence mode Long press the key to enable/disable Geo-Fence ID0 Geo-Fence in current position mode Long press the key to enable/disable Geo-Fence ID0.
GL300 User Manual Backend server developer or administrator can use the Data_Cable_M to configure GL300 2.3. LEDs Description There are three LEDs in GL300, the description as following.
GL300 User Manual 2.4.2. External Battery Interface The Pin 8 on Mini-USB connector is for external battery and named as EXTBAT pin. It can be connected to 3.7V Li-ion or Li-Polymer battery to power GL300. 2.5. Ignition Detection The Pin 7 on Mini-USB connector is for ignition detection when GL300 is used in vehicle tracking application. It is named as IGN_IND pin.
GL300 User Manual Another easy way is to connect PIN7 to a power output in the fuse box of the vehicle which is only enabled after the vehicle is ignition on. For example: the power output for radio FM. 2.6. External Input Interface The Pin 5 on Mini-USB connector is a negative trigger input in newer hardware version. It is named as NSW pin. For negative trigger input the electrical conditions are: Logical State Active Inactive Electrical State 0V to 0.8V 1.
GL300 User Manual Example of NSW pin connect to a panic button 3. Getting Started 3.1. Parts List Name Picture Remark GL300 Locater The GSM/GPRS/GPS locator. AC-DC Power Adapter (Standard accessory) It is used to charge the internal battery of GL300. GL300 Data Cable (Optional accessory) It is the USB data cable which can be used for firmware upgrading and configuration.
GL300 User Manual 3.3. GL300 External Cable Interface GL300 External Cable is a cable with a Mini USB connector and six wires which include the external power interface, ignition detect and input interface for GL300. Please find the detail description in following table. Color Name Remark RED External DC IN (5V) Please refer to 2.4.1 for detail Black Ground Please refer to 2.4.1 for detail Blue External Battery IN (DC 3.4V to 4.2V) Please refer to 2.4.
GL300 User Manual 3.5. Turn on/Turn off Turn on: Method 1: Press the Power key at least 3 seconds and release it to turn on GL300. At the same time, PWR LED will light on. Method 2: Connect device to charger or external battery, and it will turn on automatically, PWR LED will light on. Turn off: Method 1: Press the power key about 2 seconds; PWR LED will fast flash and then turn off, it indicates that GL300 is turned off. The time of power off is depended on the quality of network.
GL300 User Manual 4. Troubleshooting and Safety info 4.1. Troubleshooting Trouble Possible Reason Solution After GL300 is turned on, the GSM LED flashes quickly always. The SIM card is not inserted. Please insert the SIM card into GL300. The signal is too weak; GL300 can’t register to the network. Please move GL300 into place with good GSM coverage. PIN locked Using SIM card without SIM-PIN, or unlock SIM-PIN. The SIM card in GL300 doesn’t support GPRS. Try a GPRS supported SIM card.
GL300 User Manual 4.2. Safety info Please do not disassemble the device by yourself. Please do not put the device on the overheating or too humid place, avoid exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion. Please do not use GL300 on the airplane or near medical equipment.
WARNING: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
