GPS Locator GL200 User Manual TRACGL200UM001 Revision: 1.
GL200 User manual Document Title GL200 User manual Version 1.01 Date 2010-08-03 Status Release Document Control ID TRACGL200UM001 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers.
GL200 User manual Contents Contents............................................................................................................................................. 2 0. Revision history............................................................................................................................. 3 1. Introduction................................................................................................................................... 4 2. Product Overview.................
GL200 User manual 0. Revision history Revision Date Author Description of change 1.
GL200 User manual 1. Introduction GL200 is a powerful GPS locator which is designed for vehicle, pets and assets tracking. With superior receiving sensitivity, fast TTFF and GSM frequencies 850/1900. Its location can be real time or schedule tracked by backend server or specified terminals.
GL200 User manual 2. Specification GSM/GPS Specifications Frequency Dual-Band:850/1900MHz GPS Chipset uBlox All-In-One GPS Receiver Sensitive, Fast and Accurate Cold start -147dBm Sensitivity Reacquisition -160dBm Tracking -160dBm Position Accuracy Autonomous: <2.5 m SBAS : 2.0 m TTFF (Open Sky) Cold start 29s Warm start <29s Hot start <1s User Interfaces Mini USB Include external power and UART Connector Power Button For power on and power off.
GL200 User manual 3. Product Overview 3.1. Buttons/Mini USB Interface Description Button /Mini USB Interface Description Power Key z Turn on GL200 z Turn off GL200 when without charging. (If power key is enabled) Function Key z Geo-Fence mode Long press the key to enable/disable Geo-Fence ID0 z Geo-Fence in current position mode Long press the key to enable/disable Geo-Fence ID0. If enable Geo-Fence ID0, using the current position as the centre of Geo-Fence 0.
GL200 User manual Low voltage. Slow flash Device is in charging. Fast flash Device is in process of turn off. Device is in abnormal status. Charger connects, and charging has completed. Ever-light Device is working in normal status. GSM LED Network searching. Fast flash SIM pin locked. Network has been registered. Slow flash Power off.
GL200 User manual 4. Getting Started 4.1. Parts List z GL200 Locator z AC-DC Power Adapter z Mini-USB Data_Cable_M (Please note this data cable is only for backend server developers or administrators. It is not in the delivery list of GL200) 4.2. Battery Charging z Please connect AC-DC power adapter with GL200. z Insert the AC-DC power adapter into the power socket. z During charging, the PWR LED is flashing fast. When the battery is full charged, the PWR LED will be Ever-light.
GL200 User manual 4.3. Install SIM Card z First, open the cover of SIM card.. z Then insert the SIM card into the slot of SIM card according to the direction shown. z Finally, cover the slot. 4.4. Turn on/Turn off z Turn on: Method 1: Press the Power key at least 3 seconds and release it to turn on GL200. At the same time, PWR LED will light on. Method 2: Connect device to charger or external battery, and it will turn on automatically, PWR LED will light on.
GL200 User manual 5. Troubleshooting and Safety info 5.1. Troubleshooting Trouble Possible Reason Solution After GL200 is turned on, the GSM LED flashes quickly always. The SIM card is not inserted. Please insert the SIM card into GL200. The signal is too weak; GL200 can’t register to the network. Please move GL200 into place with good GSM coverage. Messages can’t be reported to the backend server by GPRS. The SIM card in GL200 doesn’t support GPRS. Try a GPRS supported SIM card. APN is wrong.
GL200 User manual sunlight. Too high temperature will damage the device or even cause the battery explosion. z Please do not use GL200 on the airplane or near medical equipment. Queclink Wireless Solutions Room 501, Building 9, No.
