GPS Locator GL100M User Manual TRACGL100MUM001 Revision: 1.00 http://www.queclink.com sales@queclink.
GL100M User manual Document Title GL100M User Manual Version 1.00 Date 2011-09-16 Status Release Document Control ID TRACGL100MUM001 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers.
GL100M User manual Contents Contents ............................................................................................................................................2 0. Revision history ............................................................................................................................3 1. Introduction...................................................................................................................................4 2. Product Overview ..................
GL100M User manual 0. Revision history Revision Date Author Description of change 1.
GL100M User manual 1. Introduction GL100M is a powerful GPS locator which is designed for vehicle, pets and asserts tracking. With superior receiving sensitivity, fast TTFF and GSM frequencies 850/900/1800/1900. Its location can be real time or schedule tracked by backend server or specified terminals.
GL100M User manual 2. Product Overview 2.1. Appearance 2.2. Buttons/Mini USB Interface Description Button /Mini USB Interface Description Power Key z Turn on GL100M z Turn off GL100M (If power key is enabled). Function Key z Geo-Fence mode Long press the key to enable/disable Geo-Fence ID0 z Geo-Fence in current position mode Long press the key to enable/disable Geo-Fence ID0. If enable Geo-Fence ID0, using the current position as the centre of Geo-Fence 0.
GL100M User manual Long press the key to active SOS alarm Mini USB interface Plug in the AC-DC power adapter to this interface for charging battery. 2.3. Two Triple-Color LEDs Description There are two triple-color LEDs in GL100M. Each LED shows red, green and blue to indicate different state of GL100M. For better understanding, we call them Red LED 1, Green LED 1, Blue LED 1 and Red LED 2, Green LED 2, Blue LED 2.
GL100M User manual 3. Getting Started 3.1. Parts List Name Picture Remark GL100M Locater The GSM/GPRS/GPS locator. AC-DC Power Adapter (Standard accessory) It is used to charge the internal battery of GL100M. Screw Driver (Standard accessory) It is used to twist off/ tighten the two screws on the side of GL100M when install SIM card. 3.2. Battery Charging z Please connect AC-DC power adapter with GL100M. z Insert the AC-DC power adapter into the power socket.
GL100M User manual 3.4. Turn on/Turn off z Turn on: Press the Power key at least 3 seconds and release it to turn on GL100M. At the same time, Red LED 1 will light on for 2~3 seconds. Then Green LED 1 starts to blink quickly which means searching the GSM network. After the GSM network is registered, it turns to be slow blinking. z Turn off: Press the Power key at least 3 seconds; Red LED 1 will slow flash until the terminal is off.
GL100M User manual 4. Troubleshooting and Safety info 4.1. Troubleshooting Trouble Possible Reason Solution After GL100M is turned on, the Green LED 1 flashes quickly always. The SIM card is not inserted. Please insert the SIM card into GL100M. The signal is too weak; GL100M can’t register to the network. Please move GL100M into place with good GSM coverage. System do not support hot plug. Before power on the terminal, insert the SIM card first.
GL100M User manual mode). So please make sure the GPS signal is good enough when doing the first time of GPS fixing. 4.2. Safety info z Please do not disassemble the device by yourself. z Please do not put the device on the overheating or too humid place, avoid exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion. z Please do not use GL100M on the airplane or near medical equipment.