GSM/GPRS/WIFI/GPS Tracker CP100 User Manual TRACCP100UM001 Revision: 1.01 http://www.queclink.com sales@queclink.
CP100 User Manual Document Title CP100 User manual Version 1.01 Date 2011-3-3 Status Release Document Control ID TRACCP100UM001 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers.
CP100 User Manual Contents Contents ............................................................................................................................................2 0. Revision history ............................................................................................................................3 1. Introduction...................................................................................................................................4 2.
CP100 User Manual 0. Revision history Revision Date Author Description of change 1.
CP100 User Manual 1. Introduction CP100 is a powerful GPS Tracker designed for student, pet and asset tracking. With superior receive sensitivity, fast TTFF (Time to First Fix ) and Dual-band GSM frequencies 850 / 1900MHz, its location can be monitored or periodically reported to a backend server or other device .
CP100 User Manual 2. Product Overview GSM/GPS/WIFI Specifications GSM Frequency Dual-Band: 850/1900MHz GPS Chipset uBlox All-In-One GPS Receiver Sensitive, Fast and Accurate GPS Cold start: -147dBm Reacquisition: -160dBm Tracking: -160dBm Sensitivity Position Accuracy Autonomous: < 2.5 m SBAS: 2.0 m TTFF Cold start 29s Warm start <29s Hot start <1s (Open Sky) WIFI Chipset MTK MAC/BB WLAN Chip . WIFI Frequency 2.412G – 2.462GHz . WIFI Compatible IEEE 802.11g/b Compliant .
CP100 User Manual 3. Product Overview 3.1. Appearance 3.2. Buttons/Mini USB/SIM-Card Interface Description Button /Mini USB Interface Description Power Key z Turn on CP100 SIM-Card Interface z Insert 1.8V/3V SIM-Card Mini USB Interface z z z Connect a 3.7V Li-ion or Li-Polymer battery Connect 5V DC adapter can charge internal battery Only Backend server developer or administrator can use the Data_Cable_M to configure CP100 3.3.
CP100 User Manual Power key was pressed and prepare to power off Fast flash Abnormal Fast flash Power low alert Slow flash Power off or turn off the power light by command Dark Power Off On Charging Bule Light flash slowly Charging finished Blue Light Solid On Charging Greed light flash twice, then Blue light flash twice, and the whole process will be repeated Charging finished Greed light flash once,then Blue light flash once, and the whole process will be repeated Power On TRACCP100UM00
CP100 User Manual 4. Getting Started 4.1. Parts List Name Picture Remark CP100 Locator The GSM/GPRS/GPS locator. AC-DC Power Adapter (Standard accessory) It is used to charge the internal battery of CP100. CP100 Data Cable (Optional accessory) It is the USB data cable which can be used for firmware upgrading and configuration.(Please note , it only for backend server developer or administrator ,It is not in delivery list of CP100) 4.2.
CP100 User Manual z Finally, cover the slot. 4.4. Turn on/Turn off z Turn on: Method 1: Press the Power key at least 3 seconds and release it to turn on CP100. At the same time, PWR LED will light on. z Turn off: Method 1: Turn off device by manage tool ,use GTRTO ,parameter set to 5 (PWROFF). Method 2: Turn off device by server command GTRTO, parameter set to 5 (PWROFF).
CP100 User Manual 5. Troubleshooting and Safety info 5.1. Troubleshooting Trouble Possible Reason Solution After CP100 is turned on, the PWR LED flashes quickly always. Charging is abnormal. Please unplug wall charger from CP100 and check wall charger. Messages can’t be reported to the backend server by GPRS. The SIM card in CP100 doesn’t support GPRS. Try a GPRS supported SIM card. APN is wrong. Some APN can not visit the internet directly. Ask the network operator for the right APN.