Instruction Manual

ManualsBrandsQueBeck ManualsAudio EquipmentBone Conduction Headphone

Bone conduction Bluetooth

headset

Instruction manual

Please check the instructions before use.

1. Bone conduction Bluetooth headset function

1：Answer the call, listen to the song, switch to the next

song,

Broadcast the phone number when the phone comes to the

phone

2. Bone conduction Bluetooth headset product

introduction

1: Indicator light 2：MIC

3：Power key 4：Horn

5：battery 6：Memory metal

3：Bone conduction Bluetooth headset operation and

function introduction：

1：Bluetooth pairing connection: Press and hold the

power button for about 3-4 seconds to turn on the headset.

At this time, the indicator light is green, and

the flashing headset will automatically open.

Bluetooth. Enter the phone at this time - Settings

- Bluetooth Search Bluetooth Name:

A9BT Click to pair. After the pairing is successful,

the green indicator light of the headset

Change to flash for about 30 seconds.

2：Answer the phone: When there is a phone access,

the indicator light is blue, fast

Flashing, and the vibrator (horn) has a

caller phone number, this

You can answer the call by briefly pressing

the switch.

3： Switch to the next song: press the boot button for 2

times continuously, it will automatically switch to the next song

The last call number.

4：Chinese and English language switching: wear the headset to

boot, after the boot will appear (can be paired) prompt tone,

press the second power button continuously, you will hear a

"beep"

At this point, the language has been switched to English, and the

English switching method is the same.

5：Switching machine button: In the off state, often press the

power button for 3-4 seconds to turn on, press 3-4 seconds to

turn it off when the phone is turned on, when the headset is

turned on, Bluetooth is not connected.

The headset will automatically shut down and save power in 2

minutes, and it needs to be turned on next time.

6: Charging: When the product is out of power, the

indicator lights will turn red, charging with special

interface charging line, full of green.

Disclaimer

1: Our company reserves the right to modify and

improve any of the products described in this

document without prior notice. At the same time,

the company reserves the right to continuously

Summary of content (2 pages)

PAGE 1
: Indicator light 2：MIC song, Bone conduction Bluetooth headset Broadcast the phone number when the phone comes to the 3：Power key 4：Horn phone 5：battery 6：Memory metal 2. Bone conduction Bluetooth headset introduction product 3：Bone conduction Bluetooth headset operation and 1：Bluetooth pairing connection: Press and hold the power button for about 3-4 seconds to turn on the headset. At this time, the indicator light is green, and 6 the flashing headset will automatically open. 5 1 1.
PAGE 2
update the content of the product. All contents are subject to the actual product without prior notice. other instructions frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 1. Please handle the bracelet and its battery in 2: Please charge the product for more than 2 hours before using it for the first time. accordance with local regulations. Do not dispose of the battery with normal household waste.