Thanks for buying the Groundwork KG-UVI20R-A mobile radio. This mobile radio offers latest design, enhanced features, solid performances and vast accessibility. We believe you will be pleased with the high quality and reliable features for all your communication needs. Read this important information on the safe and efficient operation before using mobile radio. This manual is suitable for KG-UVULAR-A.
One or more of the following statements may be applicable: RF Radiation Information RF Radiation Profile Your Jwouxun mobile radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy.
Part 15 Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
« AN In mobile installations, it is preferable to mount your antenna on top of the roof of the vehicle, if feasible, so as to utilize the car body as a counterpoints for the antenna and raise the radiation pattern as far away from passengers as possible. A During vehicular operation when stopped{in a parking lot, for example), make R a practice to switch to Low power if thees ara people walking nearby.
Hotkey function guide . 28.
Noise reduction settings (ANS) Menu 41 48 Scan group settings (SC-GROUP} wwe Menu da 48-50 FM radio function (FM-Radio} Reset settings (Reset) How to operate FM radio Turning on © Selecting and scanning radio stations iii : fos i : fos i sn §4 Storing and calling out the radio stations 51-52 Exiting the FM radio:mode Repeater usage Repeater PTT selection Repeater SPK selection © Two-way cross-band repeater entry and exit’: .
oH Carefully unpack the transceiver, We recommend that you identify the ems In the following table before discarding the packing material. if any tem is missing or has been damaged during shipment, please notify your Groundhog dealer.
03 General Receiver Wide bandwidth} Narrow bandwidth Frequency Range Suitable for any Region of any Country: Adjacent Chance! (FLUX) HF Stockily 270d 26008 Frequency | 136-174MHz & 400-470MHz 136-174MHz 8 400-480MHZ r—— THE CHE Range | 136.
ob 3. Use every sower slog along the side of the support bracket, you can set the transceiver to be installed at a different angle. ! » Connecting power source The transceiver power source usage ranges from 13.8VE15%. When your power source (or vehicle power source) reaches levels up to 18V, TX will be forbidden, however RX will operate as normal. When your power source {or vehicle power source) reaches levels as low as 11.5V, the transceiver will automatically shut off.
o7 u Before operation, you must effectively install and adjust the antenna, installation success depends upon the type of antenna and whether or not the antenna is set up correctly, If you use the most suitable antenna and the antenna is installed correctly, the transceiver will attain the greatest results.
= install flat switchboard panel {1} Lower alignment {2} Cover alignment { 3) Close in the direction {4} Use the supplied screws shown by arrows fo fasten hte Sat-Yapping screws {2} Specification: 2x11 = Front panel and main station installation {1} Connect the cable to the transceiver’ s 8 point socket.
Special Reminder /\ » If the connection wires are not Gown Company supplied or dealer approved, Lucia Company does not guarantee ifs safety and operational effectiveness! & Dismantling the front panel and transceiver {1} Disconnected cover in the direction of the mow {2 Remove in the direction shown by the arrow = Installation of front panel support bracket ‘When the transceivers front pane! is installed separately from the main platform, there is a supplied front panel support bracket designed especially f
Front panel " vod o3 a 1 Master frequency set up hot key (Ses hot key operation 1) / Single~tone pulse key {see Menus) 2 Frequency or channel selection, (See hot key operation 2) CATCHY 7 DCS encoding and decoding set up, CSS/ DCS scanning {ses hot key operation 3) 4 Save channel hot key (see hot key operation 4) 5 Power output settings hot key 6 FOMENT switch over hot key {see hot key operation 8) 7 Frequency shift direction hot key (See hot key operation 7) 8 TDR Single and dual display switch hot key
Back panel Power input socket Antenna connection socket Audio signal pulp socket TT Teo BD Hazardous moving parts keep fingers and other body parts away. Program connection socket! combined repeater socket Side panels Fey | i 15 Hand microphone RX indicator light (Grass) Harridan keypad lock key (device key) Transmission key [FTT) Up key, Function key! Enter kay.
17 First Q80 Do you want to hurry up and use your transceiver? After reading these chapters and sections you will know how to broadcast your voice oli into the sky. Following is a quick instruction mans, if you encounter any problems or need further explanation, please read the detailed explanation later in this manual, +installing the transceiver. {See per-usage installation) stifling the antenna. (See per-usags installation) 3. Cannecting the power source, or vehicle power source.
19 Automatic frequency correction: An operating frequency has a toll of 8 digits, the method for verifying the lest two digits after in puling 8 digits using the keyboard is as follows: When the Sth digit is entered "8", the 8th digit as "1" the final two digits will he “257, When the 6th digit is entered the last two digits will be "00", if the 6th digit is not entered as shown above, it will be automatically corrected to 6.25K step mach frequency.
TX {1} In order to transmit signal first grab hold of the handheld microphone, and place about 5 CM away from your mouth, press the {PTT} key, and then speak normally into the microphone, When transmigrating, The LED back light will change fo your set coral {For TX back light color settings see instructions on F340), the LED display screen will display a TA-LED indicator light. If you press the PTT key while transmitting outside of the coverage area you will hear an error sound.
20 Prosy er oy (on: Ac tare ROR channel switch 1 choices an index j | SE Q-BERT 2 Keys. Co Ws Ero REE lc ME EE [EEE Sire Fri [TREE Sun atc GY GE» GER [ovr |» E> aloe ear C= Ee ER [roe E> me 25 {CET Charms ol net be adds a ths la or Loewi 1.
27 i. The vehicle transceiver has multiple functions: {1} Work mode of transceiver {2} Cross-band repeater work mode {3} Repeater revolver and repeater transmitter operating mods, Note: Can be set through Menu 32 (See P44 instructions}. {1} The vehicle transceiver control panel LED is divided into two display settings, A and B, displaying the two vehicle transceiver operating Frequencies. The master frequency will be indicated by “¥ ™. This icon is very important.
{4} B79 Master frequency settings hotkey ‘When the transceiver is standby, press fhe Fiery an the handset or transceiver to switch between master frequency and secondary frequency. Sea el » When the A or B Areas or the display screen display an icon, this interpolates that that area is the master frequency, and the other areas are secondary frequency, this icon is very important, all of the functional operations are orients at the raster frequency.
frequency mode, enter 450 025MHz, then set the RX CSS to 67.0Hz vie 8 GES E0 2. The TX frequency is 10.000MHz higher than RX frequency. Set the Offset frequency to 10.000MHz via TE) 3 . And set the offset frequency direction to + via 88 key. 3, Press E38 key, and select channel number 10, then press B58, to store, and then rectum io standby mode. NOTE A > The save channel function is ineffective in Cross-band repeat or repeater reception mode / transmission mode.
Gs This function can be prohibited while the vehicle Transceiver is in cores-hard repeater or disrepair receiver of rap ester Transmitter node, (11) £4 Keypad lock key. When the transceiver is standby, press the E38 ley locks the keyboard. When the keyboard is locked, the master frequency ares is locked, both the keypad on the handset and the keypad on the from pans! are locked except he key, which can change fo the secondary frequency ana.
and OFF (prompts deactivated). ROGER Dual tone prompt method, can be sel through ie supplied programming software. can be set ugh (at most 6 digit number) as well as remaining mode of i intervals. {Ses programming sol wars for help) Beep prompt settings (BEEP) «Menu § = When the transceiver is standby, pecs te ah + E59 Tp Ross the SE key to access the menu, act after passing tre TB / BB keys to choose the retired voice prompt to contain, prods the E58 key to rebus to standby mode.
Transmission time-out timer (TOT) Menu 11 When the transceiver is scanty, press toll + 6 +9 keys encl the screen wil display: | 1797 ©) Press hol} key to access the men, and after pressing hell EZ evs to sect the required time, press the B83 key to confirm, and the ED vey omen to chary.
Gs WIDTH side tone settings (STAMFORD) Beau 18 When the banshee is sandy, press te UE 4898 +E keys an the screen wi display: | ores ©] Press the Ti key fo access the menu, and after pressing HoT 7B keys to select the required setting, press the Eli key to confirm, and the EB key io mum Sandy. The transceiver Hess the following MDT modes; 1. DT-8T: Keypad side tone wit be activated when transmitting ; 2. TANKS: caller ID onside wil oe: activation when transiting ; 3.
» 1.Channel nastiness can be 2 maximum of 8 characters long, and the first character may not be 0. Zen all 8 characters are amply, the channel wil be displayed on the screen as OH * being the current channel number).
4 Press the Crikey to aces the menu, and after pressing the E38 BB key to sellout the [30S you desist, press the key to confirm, and press te 5 key to rebus to standby. DCE: 105 groups of positive code, 105 groups negative code; OFF: Deactivate. .
cross hand pester rode, he middies of the screen wil display(5. When relay transceiver is in transmittance mote, the seven wil display 3% Connecting the relay receiver and transition Through MENU 32 (ROT-SET) settings, we can separately set the two transceivers as relay receiver and transmitter. To create a relay station, connect wo transceivers marked as PC facet block by using an 8-core facet cable separately. The core facet cable is an optional commissary.
Press the BI key to access the menu, and after pressing the 98 / 8 keys tn select the desired parameter, press the TB key to confirm, and boxlike to rectum io standby. NOTE A » When in transiting made, you can send the single nine pulse frequency you've elongated by pressing key #88 7 on fhe panel Command {Command) Menu 38 The camped function effectively minimizes noise, and its results are especially evident when reins ting over tong distances.
ng 2» The Voice scrambler function is ineffective in Cross-band repeat or repertoire reception mode / transmission mode. CTC8S | DOS scanner saving types (SCOT) Menu 40 The transceivers in TESS /DCS scanning, at the ime when scanning on the others, there wil be 3 saving types 1b chose from: 1.8ave he went ransomers ai decoder and encoder {All 2 Save the current transceivers as encoder (Encoder) 3.
How to Operate the FM Radio 1. Turing ON When the transceiver is standby, press the key, select ‘on’, and press Eo enter FM Rama.
1 R PT-SPK” rap aster PTT selection When the transceiver is standby, press ey E+ EB keys and he screen wi display From | Press the Sey to access the sayings men, and after pressing 8 Keys to select ON, press tho BB key to confirm, and the E33 key to rare io standby. LIRPT-EPK Repeater SPK selection When the transceiver is stand, press the 5 + smileys and the senora wil display.
59 vk Mobile Mable Antenna Speaker / Mic Omani-antenna Switching Power Supply (304) ES persons Directional Antenna Connection Cable Clamps Install tuns Strong Magnetic Mount Troubleshooting Before assuring your naiver is broken, please check yr erosive acceding to the Io lowing table; | he problem persists, you oan mse Be faultiness Solution Reception prompt remains dul speaker is saint W Che they the volume knob has been set to maximum.
a1 + @luxurious endeavors to achieve the accuracy and completeness of this manual, but it is still not perfect for any possible omissions or printing errors. All the above is subject to be updated without prior notice.