Thanks for buying the series transceiver. This transceiver offers novel design, enhanced features, solid performances and easy accessibility. We believe you will be pleased with the high quality and dependable features for all your communication needs.
GARS FREQUENCY CHART (MHz) (cH. No. | CH. Freq. [CH. No. | CH. Freq. |CH. No. | CH. Freq. | 462.5500) 9 462.6500 17 | 467.5750 462.5625 10 |462.6625| 18 | 467.6000 462.5750 11 |462.6750| 19 | 467.6250 462.5875 12 |462.6875| 20 | 467.6500 462.6000 13 (462.7000) 21 | 467.6750 462.6125 14 (462.7125) 22 | 467.7000 7 462.6250 15 |462.7250| 23 | 467.7250 \_8 467.6375 16 467.
use the belt-clip which is listed in instructions when attaching the radio to your belt, etc., to ensure FCC RF exposure compliance requirements are not exceeded. The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to as-sure that this radio operates with the FCC RF exposure limits of ‘this radio. This device complies with Part 15 of the FCC Rules.
Unpacking and checking of your equipment Supplied accessories Description of functions Getting started Description of transceiver Programming assistant functions Basic operations How to operate CSS and D.C..
Carefully unpack the transceiver. We recommend that you identify the items in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, please notify your dealer. Supplied accessories Transceiver High gain antenna Li-ion battery pack Intelligent charger Belt clip Hand strap User's manual 01 Description of functions 1. Frequencies available: 462.5500MHz, 462.5625MHz, 462.5750MHz, 12. Digital FM radio 462.5875MHz, 462.6000MHz, 462.6125MHz, 13.
Description of transceiver Channel selector Antenna: Distant urgency alarm key Speaker 03 Side key 2: Monterrey speakerphone jacks ...
iris able to program below miscellaneous functions on the side key PF1/topkey via programming software as needed. Tum on/off FM radio m Tum on/off scan function = Turn on/off alarm function 05 sic opera Basic operations ee. Adjusting volume Turn the Power / Volume switch clockwise to switch the transceiver power ON, and rotate this knob to adjust the volume. While counterclockwise rotating is to tum off the power. Selecting channel Rotate the channel selector to select your desired channel.
Working with Repeaters This transceiver can work with the repeater. You can set the transceivers transmitting/receiving frequencies and CTCSS/DCS tones matching to the repeater via programming software. Then it will access to the repeater. CSS and DCS This transceiver has CSS (Continuous Tone Controlled Squelch System) and DCS (Digitally Coded Squelch) functions.
Call ring The call ring function is about the ring prompt when the transceiver receives the matching MDT signaling. The time for the ring prompt is preset in the Ring time. When it is out of the preset ring time, the transceiver will open the speaker to sound out the ring as prompt automatically. Ring time It means that the speaker will sound out a clear ring as prompt when the transceiver receives the correct MDT signaling. There are totally 10 levels for the ring time, each level is 1 second.
Please set this function in the CHANNEL MESSAGE by the programming software, which can be specially programmed for each channel. MDT Side tone When the transceiver is transmitting MDT signaling, whether you prefer the speaker to be on and hearing the matching MDT tone. ON: Side tone is on when transmitting ANI ID code. OFF: No side tone when transmitting ANI ID code.