Technical Specs

ManualsBrandsQUANZHOU TEAMUP ELECTRONIC ManualsElectronicswalkie talkie

CONTENT

MAIN FUNCTIONS .................................................2

PREPARATION ....................................................... 3

Charge the battery pack ...............................................3

Install/ Remove battery pack ...................................... 4

Install the Belt Clip.........................................................4

Earphones jack/Computer programming ................4

Keyboard .........................................................................4

WORKING MODE ...................................................5

CH Mode (Channels mode) .........................................5

The radio mode .............................................................. 5

BASIC OPERATION ................................................6

Turning Transceiver ON/OFF ......................................6

Adjusting Audio Volume ...............................................6

PTT Key Transmit .......................................................... 6

MENU OPERATION ................................................7

COMPUTER R/W FREQ. FUNCTION ...................... 10

TECHNICAL SPECIFICATIONS..............................11

TROUBLESHOOTING ............................................ 13

Summary of content (7 pages)

PAGE 1
CONTENT MAIN FUNCTIONS..................................................2 PREPARATION........................................................3 Charge the battery pack................................................3 Install/ Remove battery pack.......................................4 Install the Belt Clip.........................................................4 Earphones jack/Computer programming.................4 Keyboard..........................................................................
PAGE 2
MAIN FUNCTIONS PREPARATION Charge the battery pack DD CTCSS/DCS Decoding function DD Support input CTCSS/DCS by keyboard (CTCSS: 60Hz-260Hz, DCS: 000N-777I) DD FM Radio Function DD Multiple scanning methods DD Emergency alarm function DD Can set button functions through software DD VOX Function DD Speech function DD Company programming function The battery pack is not charged at the factory, please charge it before use Initially charging the battery pack after purchase or extended storage (greater than
PAGE 3
Install/ Remove battery pack To install the battery pack, fit the extensions at the bottom of the battery into the slots at the bottom if the transceiver’s body. Press the top part of the battery towards the transceiver until a cracking sounds is heared. To remove the battery pack, Slide the battery released latch in the top middle of the battery, downwards. Pull the top part of battery away from the transceiver’s body, and lift the battery from the transceiver’s body.
PAGE 4
BASIC OPERATION Turning Transceiver ON/OFF Turn the power switch clockwise to turn in the transceiver; to turn off the transceiver, turn the power switch counter-clockwise . Adjusting Audio Volume Turn the volume control clockwise to increase the audio output level and counter-clockwise to decrease the audio output level. MENU OPERATION Press [ ] key, enter the menu mode. 1. Press [ Y ] or [ Z ] key select the menu item and press [ ] to enter entry. 2.
PAGE 5
No 6 7 8 9 10 8 Item Description The second level displays the characters N Narrow band NARR R-CD T-CD LIGH LOCK Receive CD Transmit CD Indicator settings Transceiver Lock Mode OFF/... /254.1Hz D023N/... /D7541 OFF/... /254.1Hz D023N/... /D7541 The second level setting description No Item Description The second level displays the characters OFF Press [*LOCK] key: select OFF, CTCSS, DCS. Press [#T-R] key: Switch DCS positive and negative code.
PAGE 6
COMPUTER R/W FREQ. FUNCTION TECHNICAL SPECIFICATIONS 1. Use the specified radio programming cable, Please send computer COM communication port with intercom SP/MIC socket connection is good, and open the power switch of intercom. 2. Please open your computer, run walkie-talkie programming software. 3. According to the frequency and other functions when you need to set up, in programming under the main menu select frequency, to complete the work required to setup. 4.
PAGE 7
Receiving part The sensitivity <0.20uV (12dB SINAD) Noise sensitivity <0.20uV Intermodulation interference 50dB TROUBLESHOOTING Fault phenomenon Elimination method Boot no reaction yy May have run out of battery, please update the battery or for recharging. yy Battery may not correctly installed, please remove the reshipment once.