Operating Instructions

ManualsBrandsQUANZHOU DAYTECH ELECTRONICS ManualsElectronicsTwo Way Radio

Operating Instructionson

- 1 -

Basic Operation

Power on/off

1. Power on: rotate “POWER/VOLUME” control knob clockwise to turn on the two way radio.

Meanwhile, a “tick” will be heard, following by a series of euphonic“beeps”. Then the current

channel number will be annunciated.

2. Power off: rotate“POWER/VOLUME” control knobcounterclockwise, until a “tick”is heard.

This means the walkie-talkie has been powered off.

Functions of Side Keys

The keys on the side panel are named as follows: Side Key 1: [PTT] Side Key 2: [PT1]

Side Key 3: [PF2]

Short press [PF1] to increase channel. Long press [PF1] to monitor. Short press [PF2] to

decreasechannel.

Long press [PF2] to turn on/off the flashlight. At the same time, long press [PF1] and [PF2] to

enable/disable the key lock.

Volume Adjustment

Rotate “POWER/VOLUME” control knob clockwise to increase volume. Rotate

“POWER/VOLUME” control knobcounterclockwise to decrease volume.

Channel Selection

Short press channel UP [PF1]/channel DOWN [PF2] to select the channel you want. If you

enable voice annunciation on this walkie-talkie, it will annunciate the current channel using voice.

(Note: Short press to increase/decrease channel. The key operations will increase/decrease

the channel number by loop, that is, when UP is operated: 1-16->1-16->…; when DOWN is

operated, 16-1->16-1->….

Key Lock

This two way radio allows locking and unlocking keys. By long pressing UP [PF1]/DOWN

[PF2]simultaneously, you will hear a “toot”, which means the keys are locked

Again, by pressing

UP [PF1]/DOWN [PF2]simultaneously, you will hear a “toot”, which means the keys are

unlocked

(Note: When the keys are locked: 1. the increase/decrease of channel will be invalid, but

there will be a “toot”prompt. After the keys are unlocked, the increase/decrease of channel will

return to valid.

Talking

Press[PTT] and the transmitting indicatorwill be on. You may talk in a normal tone. After

talking, release [PTT] and the walkie-talkie will turn to receiving. While talking, keep your month

3-8cm from the walkie-talkie.

Enabling, Disabling and Chinese-English Switch of Voice

Annunciation

This two way radio is featured with voice annunciation, so that you can know the current

channel of the two way radio quickly when operating at night or in the dark. This feature can be

realized through the PC programming software, or switched on this two way radio quickly (adjust

the channel to Channel 16 and press UP[PF1] to turn off it, so that the language can be switched

quickly).

Low Battery Warning

Low battery warning appears when the battery needs to be charged or replaced.

If you use the product when the battery is low, a Chinese voice prompt “请换电池” and an

English voice prompt“Please change battery”will appear every 15 seconds. If voice annunciation

is disabled, “di didi” will be sounded. The LED indicator will flashred, remindingthe user to

Summary of content (4 pages)

PAGE 1
Operating Instructionson Basic Operation Power on/off 1. Power on: rotate “POWER/VOLUME” control knob clockwise to turn on the two way radio. Meanwhile, a “tick” will be heard, following by a series of euphonic“beeps”. Then the current channel number will be annunciated. 2. Power off: rotate“POWER/VOLUME” control knobcounterclockwise, until a “tick”is heard. This means the walkie-talkie has been powered off.
PAGE 2
Operating Instructionson replace the battery pack or recharge it. Vibration Prompt This two way radio is featured with vibration prompt. If no operation is input or no signal is received on this product for more than 10 seconds, the vibration will be enabled when thesignal is received for the first time after 10 seconds.If thesignal is interrupted during vibration, or the vibration lasts more than 3 seconds, the vibration will stop.
PAGE 3
Operating Instructionson signalsound, which enables you to ignore (turn a deaf ear to) the call from a third party using the same channel. You will not hear this signal when you receive a QT/DQT signal different from the one you set on your two way radio. Likewise, the signal you transmit can only be received by a party using the same QT/DQT signal as the one you set on your two way radio.
PAGE 4
Operating Instructionson FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.