entry refers to an alas or ID that vou use to make 3 cai. Each contact will be connected with Group Call. You radio can supper af most 84 Contacts. Each contact is provided with the following information: * Caerphilly e Call giants e Call D Note: You can add or detest the user ID for the digital contact fiat. 7 View Contact List Procedure: Press the user-defined [Contact] key fo access contact list and proceed to step 4. OR Follow the steps below to access contact list. 1.
5 View the setting of menu function and operation 5. Rotate [SELECT] button to select "Add Contact” and press [OK] key or rotate [SELECT] button. 6. Display will show the information of a contact, such as name, ID number and attribute. 7. Rotate [SELECT] bunion to select "Name" and press [OK] key or press [SELECT] button. 8. When a blinking cursor appears, use the keypad of Microphones to type the name. Or Hold key fo change the Input method, which will be shown at the {op left side of the display.
View the setting of menu function and operation Rags the user-defined [Contact] key fu seacoast contact list and proceed to step 4. OR Follow the steps below to delete contact. 1. Press [MENU] key or press [SELECT] button to access the menu. 2. Rotate [SELECT] button fo select "Contact” and pass [OK] key or press [SELECT] button. 3. Rotate [SELECT] button to select "Contact List” and press [OK] key or press [SELECT] button. 4.
2¥ View the setting of menu function and operation 8. Press [PTT] key to initiate a call. The display will show the alias or ID and the icon. 7. You can speak clearly into the microphones until the "Group Call Tone” ends {if it has bean muted on} 7” Manual dia! to initiate a group call Procedure: 4. Crass [Menu] key or press [SELECT] button io aces main menu. 2. Rotate [SELECT] button te choose the “Contact” and press [OK] key or press [SELECT] button. 3.
View the setting of menu function and operation press [OK] key or press [SELECT] button. 4. Screen will display the most recent call log &. Rotate [SELECT] bunion fo select caller alias or iD = Hold the Microphone vertically 28cmto Sem (flo 2 inches} from your mouth. & Press [PTT] key fo make a call use the currently selected call alias or ID. The screen will display the call alias or I as well as 8 call icon.
28 View the setting of menu function and operation 2. Rotate [Select] knob to select Attachment and press [OK] key or [Select] knob. 3. Rotate [Select] knob fo select Date and press [OK] kay or [Select] knob. 4. The display shows the current date. 5. Press [Back] key to rectum to previous many. © GPS (optional) @ You can choose to purchase the radio with GPS feature. GPS festers allows you fo check or sand your current longitudes, latitude, me, fete, altitude and speed etc data. GPS ON/OFF Procedures: 1.
View the setting of menu function and operation 8 Rotate [Select] knob to select Location and press [OK] key or [Select] knob. = The display shows the GPS information. = Rotate [Select knob to view GPS entries. # Press [Back] key to return to the previous menu. 1 Time-zone Position Calibration Procedure: 1. Press [Menu] kay or [Select] knob fo access menu. 2. Rotate [Select] knob to select GPS and press [0K] kay or [Select] knob. 3. The display shows the GPS menu options. 4.
31 View the setting of menu function and operation Eats & Time Tone Setting Basic Setting Factory Restore Function Setting Signaling Fi Compression 4 Parameter if your dealer or system administrator allows you io set the radii, you can ssl the menu and other aspiration settings to set high flow power, time sof and voice landing (7 High / Low power if it is allowed by dealer or system administrator, users can set the repeater high/low power through menu display, to sarge the working distance.
View the setting of menu function and operation many. 5. Press [Back] key fo rectum fo the previous menu. [7 Tyre Slot and Solos Landing if it iz allowed by dealer or system administrator, users can sat and check the time slot through menu display. Procedure: 1. Press [MENU] or [Select] knob key to access the men. 2. Rotate [Select] knob to select Settings, and pres [OK] key or [Select] knob. 3. Totals [Select] knob to select Parameter Setting, and passbook] kay or [Select] knob. 4.
33 View the setting of menu function and operation Crass the preset [Eons] key to choose a zone for the radio. OR Follow the steps below. 1. Crass the [Menu] key or [Select] knob or is access menu 2. Rotate [Select] knob to select Setting, and press [QI] kay or [Salute] knob. 3. Rotate [Select] knob to dissect zone, and press [OI key or [OK] knob. 4. There are the zone lists {16 zones at most). 5. Rotate [Select] knob key lo select a desired zone in zone list and press [OK] key or [Select] knob. 8.
View the setting of menu function and operation 8 Rotate [Select] knob & select "Date Format” and pass [OK] key or [Select] knob. = The display sits different date formats, Y/AD, MDA, DIY u Rotate [Select] rob to select the desired date format, and press [OK] key or [Select knob. = The display shows "Date Format Saved” and cerebellums to the previous menu &. Crass [Back] key to rectum to previous menu.
33 View the setting of menu function and operation previsions men. OR = Rotate [Select] knob to select Silent. = Press [OK] key or [Tessie] knob, the display shows "Profile Saved” Please press [Back] to rectum to the previous menu. OR = Rotates [Select] knob to select Vibrate. = Press [OK] key or [Select] knob, the display shows Profile Saved. Pleads pass [Back] to re fum to the previous menu. OR = Rotate [Select] knob to select Vibrate on Ring.
View the setting of menu function and operation 8 Totals [Select] knob io select OFF, then press [OIG kay or [Select] knob. = Screen displays “saved” 8 Then return fo the previous mem. OR = Rotate [Select] knob to select keynote Volume, then press [OK] key or [Select] knob. = Rotate [Select] knob fo select desired volumes level, then pass [OK] key or [Select] knob. = Worsen displays “saved” = Then return to the previous menu. 8. Press [Back] to return to the previous menu.
37 View the setting of menu function and operation [firearm] lost or [Select] knob. = Rotate [Select] to select the desired volume level, and then press [confirm] key or [Select] knob. = The screen shows "Volume Saved” = Screen will back to the previous many 6. Press [Back] to rectum fo previous menu & Message prompt phone If it is allowed by your dealer or system administrator, users could program or check message tone.
View the setting of menu function and operation i Group call tone fH Is allowed by your dealer or system administrator, users could program or check the group cal tone types and activate or tum off the tone feature. {7 Group call {one & ring sating You can tum on or off group call dons wham the radio ‘ran emit of recede the group call, and select the desired tone from dons 1 fe tone 5. Procedure: 1. Press Menu] key or [Select] knob fo access menu ist. 2.
38 View the setting of menu function and operation users could set or check the call prompt tone via screen man. 2 Users can program or check the following basic functions: = Language = Key lock = Back light = Version = Display mods J Language if it is allowed by your dealer or system administrator, users could check or set their menu display language via screen menu 1 Language if required, users could chooses one of press language as their radii menu display language. Procedures: 1.
View the setting of menu function and operation 2. Rotate [Select] tv select “Betlings”®, then press confirm] kay or [Select] knob. 3. Rotate [Select] knob 10 select "Basic Melting” then press [confirm] key or [Select] knob. 4. Rotate [Select] to select "Key Lock” then press confirm] key or [Select] knob. &. All key lock modes will be listed on screen 8. Rotate [Select] to select a desired mode, then press [unmeaning] key or [Slacks] knob.
41 View the setting of menu function and operation press [confirm] kay or [Scowl] knob. 4. Rotate [Select] to select "Back light setting” then press [confirm] kay or [Select] knob. 5. Role [Select] fo select a desired sub-menu, then press [confirm] key or [Select] knob. = Rotate [Select] fo select back light switch, and then press [confirm] key or [Select] knob. = Screen shows all back light modes. = Relate [Select] fo select a desired back light mode, and then press [confirm] key or [Select] knob.
View the setting of menu function and operation 1. Press [Menu] key or [Select] knob to aces menu list. 2. Rotate [Select] tv select “Betlings”®, then press [firearm] lay or [Select] knob. 3. Rotas [Select] knob to select "Basic Siting” then press [confirm] kay or [Select] knob. 4. Rotate [Select] to select “Version” then press [cordite] kay or [Select] knob. 5. The radio version tads will bs displayed on screen. 6.
View the setting of menu function and operation chatting to factory default. Procedure: 1. Crass [Menu] key or [Seismic] knob to access menu list. 2. Rotate [Select] to select "Setiings”®, then press [confirm] key or [Select] knob. 3. Rotate [Select] to select “Factory default” then press [confirm] key or [SELECT] knob. 4. Screen shows ‘The operation can NOT be retrieved, are you sure to do?” 5. Press [confirm] or [SELECT] moh fo confirm io restore factory default.
View the setting of menu function and operation [firearm] lost or [Select] knob. Or = Rotate [Select] to select TX Narrow band, then press fountain] key or [Select] knob. = Screen shows "Set saved” and back to previous mer. 5. Crass [Back] fo return fo previous menu i Signaling setting® ‘You could preset the repeater CSS or CROSS under analogues mode via screen menu, to avoid mussels signal interference.
45 View the setting of menu function and operation {J FM vole commanding decode if required, you colt id preset voice processing type for TX and RX Procedure: 1. Press [Menu] key or [Select] knob to access menu list. 2. Rotate [Else] to select “Settings”, then press [confirm] key or [Select] knob. 3. Rotate [Select] to select "FM voice commanding decode” then press [confirm] key or [Select] knob. 4.
View the setting of menu function and operation channel, but repeater scans an analogs signal and locked on the thane, then the remaster will auto switch to analogue mods from digital mods during the calling duration, vice versa. Hots: ones the scan salivated, repeater may fail to transfer signal in time or mes some signals. Thus, please be careful on the feature. Procedures: Crass definable key [Scan Switch] to tum on or off the Sean. Or operate via screen menu as barrow: 1.
47 View the setting of menu function and operation disappears, and then continue fo scanning. TO {Tami} — Once the radio receives a scanned signal over the alr, it wil stay en that channel! for a pr asst time. Once time is out, it will continue to scanning. BE {Seek) — Once the radio receives a scanned signal over the alr, it wil stay on that channel and shop scanning uni] you re-activate to scanning Procedure: 1. Press [Menu] key of [Select] knob to access menu list. 2.
View the setting of menu function and operation 7. All channel number or name under the scan list will be listed out. 2. Rotate [Select] to check or else the scan list member. 8 Press [confirm] kay or [Select] knob = Rotates knob fo select "Priority channel” or “Disable priority” or “Delete” option, and then Press [confirm] key or [Select] knob. = Cross [Back] to rectum to previous menu. ar = Rotate [Select] knob io chooses "Add Channel” and then press nonfiction] key or [Select] knob.
