2 s Elective CALL s Elective call 12 @ Using DCS B The delectable DCS code, refer to the DCS code table* 1. Press MENUHIN and then tum channel selector to select Menu No. 3 . {CT.DCS). The available DCS code (Normal“N") 2. Press [MENU] and then tum channel selector to select “DC.
12 s Elective CALL LAMP 1 3/key LOCK FUNCTION 14 4 Selecting RX DCS code 1. Press [MENU] key, and then tum channel selector to select Menu No.7 (Rd) . The current DCS code appeal 2. Press [MENU] key. 3. Tum channel selector to select desired DCS code. HB The delectable DCS code, refer to the DCS code table . 4. Press [MENU] to store the new setting and continue to set other function. Or press [FUN] key to store new sifting and exit Menu Mode. @ Selecting TX DCS code 1.
15 monitor OPERATOR CONVENIENCES 1 6 MONITOR 1. When you are receiving as the squelch function is ON, weak signals may become intermittent. 2. If the CSS or DCS function is ON, you may want to disable the squelch function temporarily to monitor the current channel activities. 3. In both of these cases, use the Monitor function to temporarily disable the squelch function. Activate the Monitor function: 1. Press and hold [MON] key for 3s HW The speaker is UN-muted and you can monitor the signals. 2.
16 OPERATOR CONVENIENCES OPERATOR CONVENIENCES 16 TIME-OUT TIMER The Time-out Timer limits the time of each transmission. The built-in Time-out Timer limits each transmission time to a maximum of 1 (default) minutes. Just before the transceiver stops the transmission, a warning beep sounds. This function is necessary to protect the transceiver from thermal damage due to overheat and therefore is recommended not to be turned OFF. 1. Press [MENU] , and then turn channel selector to select Menu . 2.
16 OPERATOR CONVENIENCES OPERATOR CONVENIENCES 16 2. Press [MENU] to store the net setting and continue to set other function. Or press [FUN] key to store new setting and exit Menu mode. HB "VOX appears on the top right of the display when the VOX function is ON. 3. Press [MENU] to store the net setting and continue to set other function. Or press [FUN] key to store the new setting and exit Menu mode. 4.
16 opera Tor CONVENIENCES OPERATOR CONVENIENCES 1 6 4. Tum channel selector to select a desired call tone (1-8 or 1750Hz). 5. Press [MENU] fo store the net setting and continue to set other function. Or press [FUN] key to store new setting and exit Menu mode BATTERY SAVER The Battery Saver extends the operating time of the transceiver. It automatically activates when the squelch is closed and no key is pressed for more than 10 seconds.
16 OPERATOR CONVENIENCES POWER ON MESSIER You can change the Power-ON Message (a maximum of 6 characters) when the transceiver is turned ON. 1. Press [MENU] then tum channel selector to select Menu No. 22 (POISONING) 2. Press [MENU] key. The current message and entry cursor appear. Press [MENU] key to move the cursor to the next digit. 3. Tum channel selector select a character. ‘You can enter the following alphanumeric characters: 0~9, A~Z, — (hyphen), / (slash) and a space. 4. press [MENU] key.
16 opera Tor CONVENIENCES OPERATOR CONVENIENCES 1 6 1. Press [MENU] then tum channel selector to select Menu No. 25 (ENC, OFF) 2. Press [MENU] then tum channel selector to select “ON” or “OFF”. “ON” means can normally use, “OFF” means turn OFF Tuning control. 3. Press [MENU] key to store new setting or press [PTT] key to store and exit MENU mode. MEMORY CHANNEL LOCKOUT 1. Press [MINI] key to recall a stored channel, and then turn channel selector to select a desired channel number. 2.
1 7 QUICK REFERENCE TO KEYS AND MAIN FUNCTIONS standard S 18 UHF Frequency Range 400-480MHz Channel 199 Workshop 7.4V (Li-ion) DC 215% Antenna Resistance | 50Q Frequency Step 12.5KHz Workable Temp Frequency Stability +2.
19 specifications Accessories 20 Transmit Part Item Quantity Power Output 5/AW Antenna 1 Modulation FM Twin Charger 1 Max. Frequency Deviation | W< kHz /N¢ +2.5KHz Adapter 1 Spurious Radiation <—60d Li-ion Battery Pack(2300mAh) 1 Enhanced property Increased by 6dB increment Belt clip 1 Transmitting Current 1300mA User manual 1 Hand Strap 1 Receiver Part Sensitivity (12dB SIN AD) Squelch Sensitivity 0.