2 INITIATING AND RECEIVING CALLS CHOOSE A ZONE A zone is a group of channels. Your radio supports up to 16 zones, with a maximum of 16 digital channels and 16 analogue channels per zone. Choose a working zone by following steps: Procedure: 1. Press the preset "Zone Switch” key. 2. A confirmed prompt tone or voice prompt {if muted on } will be heard, indicating the radio changes from current zone to another zone successfully.
INITIATING AND RECEIVING CALLS Receiving and Answering fo a Group Call @ To receive a group call, your radio must be programmed as part of that group. Procedure: When receiving a group call: 1) Blue LED indicator is flashing (if the LED indicator function is turned on). 2) To answer { reply, hold the radio vertically 2.5cm to Sem {1 to 2 inches) from your mouth.
14 INITIATING AND RECEIVING CALLS A general call is a call from an individual radio to all radios in the same channel. Procedures: When receiving a general call: 1) Bite LED indicator is flashing (if the LED indicator function is turned on). 2) If the "Prompt Tone" for general call is enabled, you will hear a short phone when the transmitting radio release the "PTT" Key, means your radio is free to response. 3} The call is end, if there is no audio acclivity in preset time. Note: 1.
INITIATING AND RECEIVING CALLS 8. If the "Prompt Tone" for group call is enabled, you will hear a short phone when the transmitting radio is releases the "PTT" key, means the channel is free for you {fo answer. At this moment, you can press the "PTT" key to answer the call. OR The call is end, if there is no audio activity in preset teems.
16 INITIATING AND RECEIVING CALLS Prompt: Users on the channel can't answer {o a general call. @ You can initiate a Group Call, Private Call and call alert by presetting bunions. Preset keys' feature allows you to initiate a group call, private call and call alert to preset ID. This feature can be programmed as short press and long press operation. You can set each preset keys as one 1D, different radio models can have different preset keys.
INITIATING AND RECEIVING CALLS MONITORING SETTINGS Monitoring a Channel! £3 Use the monitor feature to make sure a channel Is free before transmitting. Procedure: 1. Press and hold the preset [analog monitor] key and listen to the activity. 2. The LED indicator lights up solid green. (if LED indicator is enabled) 3. When you hear the activity of radio or "while noise” ( the channel is free), press PTT fo talk and release PTT fo listen.
DMR OPERATION ITEMS ( PROGRAMMING SOFTWARE) Remote Monitoring duration Users can limit the duration of the radio that being remote monitor by other users. {Range from 10s to 120s) Decoding Remote Monitoring Users can turn on or off for allowing your radii to receive and process the remote monitor instruction from other radios through per-programmed (by programming software). This instructs indicate receiver radio within the range of remote monitor to revive its own Mic & transmitter.
20 DMR OPERATION ITEMS ( PROGRAMMING SOFTWARE) not encrypted. The receiver and transmitter radio must be preset to have the same encryption level or the same Key Value and Key ID, then can decry pt an encryption-sable call or receive encrypted transmitting data. You can enable or disable the encryption function through custom buttons of Short press or Long press (The Encryption ON / OFF) or Encryption ("Setting” menu).
CONTENT (V) ADVANCED FEATURES Please use below guides to learn more about the radio features: During scanning and transmitting types... 22 Talk back 22 Scan transmitting mode. Appointed channel... Scan mode. . Scan 22 Scanning . Start and stop scanning 23 During scanning, reply to emit.. Call Receiving and replying call alert Call Alert Emergency Sending an Emergency alarm. Sending an Emergency alarm with voice. Re initiate and exit the emergency mods... Encryption More services Sending Radio Detection.
ADVANCED FEATURES REPLY (OR TRANSMIT) TYPES DURING SCANNING You can set the reply mode or transmit type of the scan list by the per-programmed software. Talk back @. if software presets it ON, when a carrier signal on the scan list is received during scan, and disappear in 3s later. Press [PTT] bunion to reply the current channel member scanned. @.
ADVANCED FEATURES signal on current channel or group. Your radio supports up to 16 scan lists, and each scan can contain a maximum of channels. Each scan list supports both digital and analogue modes. SCAN When you initiate a scan, your radio cycles the channels or groups in the scan list fo check if there is any voice activity. The LED indicator flashes blue and green speedily.
24 ADVANCED FEATURES CALL ALERT Users can turn on or off to allow other radios use the alert function to request you call back when you are available by press per-programming the direct call key. Receive and respond io call alert When you receive call alert: 1. You will hear a prompt phone repeatedly. The LCD indicator flashes blue speedily ( if activated.) 2. You can press [PTT] fo reply within 4 seconds after you receive the call alert.
ADVANCED FEATURES » Silent with Audio — Radio Alarm Signaling, the radio can send the alarm signal without showing audio or visual alert and radio will send the emergency alarm on the eligible channel. Note: 4A Only one of the above emergency alarm can be set to the emergency alarm key. 4 This is available ONLY in digital mode.