User Manual Model name: ZM260 Zigbee 2.4GHz Module Version: v1.
Date: August 8, 2011 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID:T5U-ZM260”.
Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et les utilisateurs, et 2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé.
distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC:7427A-ZM260 ". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module.
Contacts 1. 2. 3. Revision History ............................................................................................................... 9 Related Documents .......................................................................................................... 9 Overview ......................................................................................................................... 10 3.1. Scope ..........................................................................................
1. Revision History Date Auguet 8, 2010 Release Author 1.0 Jack Ong Description First release 2.
3. Overview 3.1. Scope This document describes the specifications of ZM260 IEEE 802.15.4 RF4CE ZigBee transceivers module. The low power consumption and smaller size are suitable for consumer electronic. ZM260 also provides a cost-effective solution for short-range data links and networks. 3.2.
3.3. Specification Absolute Maximum Ratings Rating Symbol Value Unit Power Supply Voltage VBATT, VDDINT -0.3 to 3.9 Vdc RF Input Power Pmax 10 dBm Storage Temperature Range Tstg -20 to 70 °C Operating condition Rating Symbol Min Typ Max Unit Power Supply Voltage VBATT, VDDINT 2.2 3.3 3.6 VDC Operation Temperature Rang TA -10 25 70 °C Operation Frequency f 2.405 2.48 GHz Characteristic (operating voltage=3.
Transmit Center Frequency Tolerance -20 6 20 ppm Error Vector Magnitude (EVM) (over temp.) --- 12 35 % --- -97 -92 dBm Receiver Sensitivity for 1% Packet Error Rate (PER) Maximum Input Power 10 dBm Channel Rejection for 1% PER (desired signal -82 dBm) +5 MHz (adjacent channel) -5 MHz (adjacent channel) +10 MHz (alternate channel) ------- 46 46 53 ------- dB dB dB -10 MHz (alternate channel) >= 15 MHz ----- 53 53 ----- dB dB Energy Detect / Link Quality Indicator -6 +6 dB 3.4.
Page 13
3.5.
