Product name:IEEE802.16e WiMAX CardBus Model name:WC510 Brand name:QMI Quanta Computer Inc. http://www.quantatw.com/ Quanta WiMAX Connection Manager User Guide Version 1.
Quanta Computer Inc. http://www.quantatw.com/ Contents 1. Introduction ...........................................................................................................................................4 2. Hardware installation ............................................................................................................................4 3. Driver installation and un-installation...................................................................................................
Quanta Computer Inc. http://www.quantatw.com/ Revision History Version Release Date Description 1.00 07/04/2007 1st User Guide Release 1.
Quanta Computer Inc. http://www.quantatw.com/ 1. Introduction The CardBus of WiMAX Connection Manager supports IEEE 802.16e-2005 state of the art Scalable OFDMA based Technology. It provides users a seamless broadband wireless access, video streaming at home, office or on the move. To protect information transmitting through wireless network, standard security Sublayer PKMv2 EAP based user authorization/authentication and AES for data encryption are supported.
Quanta Computer Inc. http://www.quantatw.com/ 3. Driver installation and un-installation 3.1. Un-install the previous WiMAX NDIS Driver 1. You have to plug the WiMAX Connection Manager card into your laptop before unload the old WiMAX NDIS driver. 2. Right-click on “My Computer”, in the Start menu, and choose “Properties” 3. On the “Hardware” tab, choose “Device Manager” 4. Expand the “Network Adapters”entry 5. Right-click on “BCM CARDBUS t3 Network device”and select “Uninstall”. 6.
Quanta Computer Inc. http://www.quantatw.com/ 3.2. Install WiMAX NDIS Driver 1. Please, un-install your previous WiMAX NDIS driver before you install the new WiMAX NDIS driver (reference: Chapter 3.1 ). 2. Please, use WinRAR to decompress the WiMAX_Driver.rar to your C disk. 3. It will create a WiMAX_Driver folder in your C disk (C:\ WiMAX_Driver). 4.
Quanta Computer Inc. http://www.quantatw.com/ 9. When prompt to choose your search and installation options, select “Don’t search. I will choose the driver to install.” option. 10. Click the “Next >” button to continue the installation. 11. Please click the “Have Disk…” button to continue the installation. 12. Select C:\ WiMAX_Driver from pull-down menu and click the ‘OK’ button to continue the installation Page 7
Quanta Computer Inc. http://www.quantatw.com/ 13. Windows XP has found the driver in this directory. Please click “Next >” button to install the driver. 14. Please click on “Continue Anyway” button. 15. Please click the “Finish” button to complete the installation.
Quanta Computer Inc. http://www.quantatw.com/ 4. WiMAX Utility installation 4.1. .NET Framwork 2.0 In order to run Quanta WiMAX Connection Manager (WCM), the .NET Framework Version 2.0 (or higher) must be installed. The .NET Framework 2.0 is already installed on many Windows XP computers. If you see a Windows error message that begins ‘This application has failed to start because the application configuration is incorrect. …’ as soon as you try running the WCM, it’s very likely that you do not have the .
Quanta Computer Inc. http://www.quantatw.com/ 3. Please click the “Next >” button. 4. Please click the “I Agree” button. 5. Please click the “Finish” button to complete the WinPcap library installation.
Quanta Computer Inc. http://www.quantatw.com/ 4.3. Quanta WiMAX Connection Manager installation 1. Please, use WinRAR to decompress the “QuantaWCM Installer.rar” to your laptop. 2. Then enter “QuantaWCM Installer/” folder and execute “setup.exe” to install Quanta WCM. 3. Please click “Next >” button.
Quanta Computer Inc. http://www.quantatw.com/ 4. If you want to install the utility to a different folder, you can click the “Browse…” button. 5. You can choose “Just me” or “Everyone” to change who can use the utility. 6. Please click the “Next >” button to keep going on. 7. Please click the “Next >” button to install the utility. 8. Please click the “Close” button to complete the installation.
Quanta Computer Inc. http://www.quantatw.com/ 9. You can start to use the utility, “Quanta WCM” to setup and configure the WiMAX subscriber (WCM). After finished Quanta WCM installation, if Quanta WiMAX card was inserted and power on, you can double click the “QuantaWCM” icon to lunch the WCM . Before first running the WCM, it’s necessary to configure firmware configuration file, such that it could make it effect on your system.
Quanta Computer Inc. http://www.quantatw.com/ 2. Please, click “Option” on the Menu to setup the WiMAX configuration. 3. You can choose the “Enable MAC management message logging” option to active/de-active MAC message log to file.
Quanta Computer Inc. http://www.quantatw.com/ 4. Please, click “Network Search” tab to setup WiMAX configuration (Frequency, Bandwidth, etc.) 5. You can setup “Bandwidth”, “Selection Mode”, and “Center Frequencies”. 6. Please, click the “OK” button to complete the networking setting.
Quanta Computer Inc. http://www.quantatw.com/ 7. Click the “Authentication” tab. 8. Please, don’t click the “Enable authentication” option. (We disable the PKMv2-EAP feature) 9. When you click the “Security” tab, you can not modify any configuration. Because, you disable authentication feature.
Quanta Computer Inc. http://www.quantatw.com/ 10. Please, click the “Advance” tab and don’t modify any configuration for this current software. 11. Then click the “OK” button to complete the Networking setting.
Quanta Computer Inc. http://www.quantatw.com/ 12. Now, we come back the Quanta WCM General window and click the “Search” button to start network searching.
Quanta Computer Inc. http://www.quantatw.com/ 13. If it finds a BS, it will automatically connect to this BS. 14. Please, click the “Stats” to display WiMAX information.
Quanta Computer Inc. http://www.quantatw.com/ 15. Please, click the “TCP/IP” tabe to display your networking information. 16. Please, click the “Device” tab to display WiMAX device information.
Quanta Computer Inc. http://www.quantatw.com/ 17. Please, click the “Debug” tab to display WiMAX debugging messages 5.2. Use Quanta WiMAX Connection Manager to setup WiMAX connection with security configuration 1. Please, double click the “QuantaWCM” icon to lunch the WCM.
Quanta Computer Inc. http://www.quantatw.com/ 2. Please, click “Option” on the Menu to setup the WiMAX configuration. 3. You can choose the “Enable MAC management message logging” option to active/de-active MAC message log to file.
Quanta Computer Inc. http://www.quantatw.com/ 4. Please, click “Network Search” tab to setup WiMAX configuration (Frequency, Bandwidth, etc.) 5. You can setup “Bandwidth”, “Selection Mode”, and “Center Frequencies”. 6. Please, click the “OK” button to complete the networking setting.
Quanta Computer Inc. http://www.quantatw.com/ 7. Click the “Authentication” tab. 8. Please, click the “Enable authentication” option. (We enable the PKMv2-EAP feature) 9. Please, click the “Security” tab to setup your authenticated configuration.
Quanta Computer Inc. http://www.quantatw.com/ 10. Please, click the “Advance” tab and don’t modify any configuration for this current software. 11. Then click the “OK” button to complete the Networking setting.
Quanta Computer Inc. http://www.quantatw.com/ 12. Now, we come back the Quanta WCM General window and click the “Search” button to start network searching.
Quanta Computer Inc. http://www.quantatw.com/ 13. If it finds a BS, it will automatically connect to this BS. 14. Please, click the “Stats” to display WiMAX information.
Quanta Computer Inc. http://www.quantatw.com/ 15. Please, click the “TCP/IP” tabe to display your networking information. 16. Please, click the “Device” tab to display WiMAX device information.
Quanta Computer Inc. http://www.quantatw.com/ 17.
Quanta Computer Inc. http://www.quantatw.com/ 6. Appendix 6.1. Use Quanta Config File Editor to setup configuration file parameters 1. Please, double click the “Quanta Config File Editor” icon to lunch the Config File Editor. 2. Click the “File” on the Menu, and click “Open” to open a configuration file.
Quanta Computer Inc. http://www.quantatw.com/ 3. Please, open the “C:\WINDOWS\system32\drivers\ macxvi.cfg” configuration file and click “Open” button. 4. You can modify the configuration parameters after you load macxvi.cfg finished. 5. Please, refer to next chapter that descript configuration parameters what you can modify. 6. Please, click the “File” and select “Save” or “Save as” to save your modified. 6.2.
Quanta Computer Inc. http://www.quantatw.com/ Band A Scan 1: Band-A is scanned Band B Scan 1: Band-B is scanned Band C Scan 1: Band-C is scanned Rtps Enable 0: Disable Rtps 1: Enable Rtps 0: Disable nRtps 1: Enable nRtps 0: Disable eRtps 1: Enable eRtps 0: Disable Ugs 1: Enable Ugs 0: Disable Hand Off 1: Enable Hand Off nRtps Enable eRtps Enable Ugs Enable Handoff Enable Please check with Beceem communications to find out supported center frequencies for a given solution.
Quanta Computer Inc. http://www.quantatw.com/ ArqType ARQ Reserved #1 ARQ Reserved #2 ARQ Reserved #3 ARQ Reserved #4 MacParameter UL PRBS 0: Broadcast CID value 0xffff 1: Broadcast CID value 0xfeff 0: UL PRBS seed encoded to 0.
Quanta Computer Inc. http://www.quantatw.com/ NumOfSAId RadioParameter PhyParameter1 [3:0] = 2, always [7:4] is Band Select [15:8] is a board type that should be zero unless specified by Beceem otherwise. For example: 0x22: For MS120 units supporting Board Type 2.3 to 2.4G 0x32: For MS120 units supporting Board Type 2.5 to 2.7G 0x42: For MS120 units supporting Board Type 3.4 to 3.6G For BCS200, Band Select is a don’t care. This parameter decides the number of DL, UL symbols and TTG value.
Quanta Computer Inc. http://www.quantatw.com/ Corr2PhyFlags This parameter is currently not used. It is a placeholder for a bit map for enabling/disabling Corrigendum-2 updates in PHY. This should be 0 unless testing for Corrigendum-2. 6.3. Setup WCM network configuration to static IP address 1. Plugin WCM card to your Laptop. 2. Setup WCM with a static IP address as the below procedures. 3. Open Windows Start menu. 4. Open Control Panel. 5.
FCC STATEMENT FOR PORTABLE DEVICE Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CE STATEMENT FOR PORTABLE DEVICE This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC EN 60950-1: 2001 Safety of Information Technology Equipment EN 301 489-1 V1.6.
Česky [Czech] [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse] overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Slovensko [Slovenian] [Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Slovensky [Slovak] [Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
