Clover Flex Starter Kit Quick Start Guide
About We are continuously improving our software. Visit clover.com/setup to get the latest version of this guide. In Europe, visit eu.clover.com/setup 1 Clover Flex Starter Kit Quick Start Guide Clover Flex is a powerful and easy-to-use payment terminal that can also support point-of-sale (POS) functionality. Its integrated hardware lets you take payments, print receipts, scan inventory, and run your day-to-day business operations wherever you are.
Clover Flex Features Clover Flex Starter Kit Contactless payment reader Power button & fingerprint sensor Chip card reader Microphone Clover Flex (In the device box) Magnetic stripe card reader Anti-theft security slot Audio jack Barcode scanner Speakers Barcode trigger Charging cradle Screwdriver Receipt paper door Charging pads USB Type-C connector Power cord (2 for EU) Power brick 3 Clover Flex Starter Kit Quick Start Guide Receipt paper 4
Set Up your Clover Flex Recommended Usage Hand Holding Position Video set up: clover.com/setup EU: eu.clover.com/setup (Only for EU) Install the micro SIM card. See page 8 for more details. SIM cards have been pre-installed for US. 1 Plug the power brick into the charging cradle and press the cord into the rubber base so that it is flush on the counter. 2 Attach the power cord to the power brick and plug the power cord into a power source. 3 Place the device on the charging cradle.
Payment Methods Clover Flex SIM Installation Chip Cards Insert the card with the chip end first. Remove the card when prompted by the device, then follow the on-screen instructions. Magnetic Stripe Cards Swipe the card with the magnetic stripe facing down. You can swipe the card from right to left or left to right. (Only for EU) Micro SIM cards are pre-installed for the US. First, power off the Clover Flex device. 7-8 Open the receipt paper door and locate the screws above the serial number (S/N).
Applications Useful Resources Clover comes with apps that take payments, run your front of house, and manage your back of house. Go to App Market to browse and install more apps to meet your needs. Web Access Some apps can be accessed via your web browser. We’ve put shortcuts to these web pages at clover.com/home. Please use Chrome, Safari, or Firefox. In Europe, visit eu.clover.com/home. Sale Enter an amount and take multiple payment types. Refund Refund a payment or an amount directly on a card.
FCC Part 15 Industry Canada statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B) FCC Part 15 Class B-specific Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence.
(iii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée pour l'exploitation point à point et l’exploitation non point à point, selon le cas; (iv) les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la p.i.r.e. applicable au masque d’élévation, et énoncée à la section 6.2.2 3), doivent être clairement indiqués.
Clover Flex Model: C401U Waste Electrical and Electronic Equipment-WEEE NOTE: This product is covered electronic equipment under the European Union’s Waste from Electrical and Electronic Equipment (“WEEE”) Directive (2012/19/EU). The WEEE Directive requires that covered equipment be collected and managed separately from typical household waste in all EU member states.
