B82 User Manual
Device layout figure MICRO USB connector 2M CAMERA LIGHT SENSOR Touch screen 5M CAMERA Headset plug VOLUME BUTTON SIM card socket (3G only) DOCKING connector Micro SD socket DC JACK SD DOOR POWER BUTTON HOME BUTTON SPEAKER
Buttons Buttons Power Button Function • Press and hold to turn the device on or off. • Press and hold for 8-10 8 seconds to reset the device if it has fatal errors or hang-ups, hang or freezes. Home • Press to return to the Home screen. • Press and hold to open the list of recent applications. Volume • Press to adjust the device volume.
Socket and Other Device Name Function Docking connector For the connection with docking station; USB/ headphone/ UART interface included Charger Jack Connect to power adapter for battery charging USB connector Headset jack SIM card socket SD card socket Speaker Light sensor 2M/5M Camera Connect to USB devices, such as USB memory module, USB KB, USB mouse, etc.
Charging the battery • Use the charger to charge the battery before using it for the first time. time • This device doesn’t design the charging via USB socket. Please use only device-provided provided chargers to charge battery. Unapproved chargers or cables can cause the battery to explode or damage the device.
Inserting a memory card Device accepts memory cards with maximum capacities of 64 GB. GB 1. Insert a memory card with the gold-coloured gold contacts facing downwards. 2. Push the memory card into the slot until it locks in place.
Using the touch screen • Only fingers applicable to the touch screen. screen To avoid the touch screen damage, do not tap it with anything sharp or apply excessive pressure to it with your fingertips. • Tapping: To select a menu item or open an application by pressing an onscreen button, or to enter a character by using the on-screen keyboard, tap it with a finger. • Dragging: To move an icon, thumbnail, or preview to a new location, tap and hold it and drag it to the target position.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Continued FOR PORTABLE DEVICE USAGE (<20cm from body/SAR needed) Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR.
System specification System specification Voltage/ Current: Voltage 5V, Maximum current 2A AC Adapter Input voltage range / Frequency： ：100 ~ 240 V AC, 50/60 Hz DC Output：5V, 2A Trade name / Model : APD / WB-10E05FU 10E05FU-DAAA Battery Built-in Lithium-ion Polymer rechargeable battery Capacity: 4800 mAh
