User Guide
QUICK REFERENCE INSTALL GUIDE
1
Push the edge of a blunt blade such as a Letter
Opener or Flathead Screwdriver Tip under one corner
of the Backer Film to free it from the adhesive strip.
Remove the Backer Film.
Press the Cable Tie onto a clean, dry surface.
Fasten with a screw through the center-hole.
CAUTION: When fastening to a desk or other
furniture surface, use a screw that is shorter
than the thickness of the of the furniture.
NOTE: For applications requiring the Cable Tie to swivel, back off
the screw slightly from fully tightened to allow for swivel movement.
TO FASTEN WITH THE BUILT-IN DOUBLE-SIDED TAPE TO FASTEN WITH A SCREW
CAUTION: The adhesive is very strong, and
can pull paint or finish off of a wall or furniture
surface when the Cable Tie is removed.
2
Pull open the Loop Section of the Cable Tie.
Push your cable bundle into the corner/joint where the Hook and
Loop sections meet.
3 4
Close the Loop Section to capture your cable bundle in place.
COMPILED ASSETS
thecollaborativedesign@gmail.com | www.thecollaborativedesign.com | 270.302.9403
3.
NEXA BOLD
AMATIC
NEXA LIGHT
AMATIC BOLD
CORE
CORE
CORE
CORE
CORE
CORE
CORE
CORE
CORE
CORE
CORE
CORE
CORE
CORE
CORE
TRADEMARK UPDATE
- Mounted Cable Ties –
PRODUCT Dimensions
Applications
Quick Reference Guide
• Under, Top or Side of Desk
• TV/Entertainment Systems
• On Wall Cable Routing
• Around the Workshop
• In Equipment Racks
• Network Equipment
• Printers, Copiers
• WiFi Equipment
For Technical Support, Feedback or Customer
Service please contact us:
• Email: info@QualityClever.com
• Phone: +1.888.861.1704
• This is not a toy
• Keep away from children
• This is not a safety device
• Contains small parts- Choking Hazard
Visit www.QualityClever.com:
• View How-To Videos
• Download detailed Installation Instructions
• Register Your Product for Lifetime Warranty Coverage
PATENT
PENDING