User Manual

CAUTION!
Do not exceed the maximum rated weight
specified. Otherwise, serious injury or
property damage may occur.
3”~3’ 1.5” NPT THREADED PIPE
QG-PRO-PM-3IN-B / W
QG-PRO-PM-6IN-B / W
QG-PRO-PM-1FT-B / W
QG-PRO-PM-2FT-B / W
QG-PRO-PM-3FT-B / W
363kg
(800lbs)
RATED
Version June 2016
5 Year Limited Warranty
Version June 2016
5 Year Limited Warranty
IMPORTANT! Do not loosen screws all the way when making adjustments, this
may disconnect the parts and may cause injury or property damage.
Connecting the Pipe to a Ceiling Adapter
Connect this 1.5” NPT threaded
pipe end to the ceiling plate
Cable Management
Connect this 1.5” NPT
threaded pipe end to
the mount head
(B)
Take out the top piece on the
cover plate (B) and push
the cord through the opening.
Using allen key (II), tighten screws onto the
pipe and secure the position.
To connect the pipe to a ceiling adapter,
twist the male threaded end into the
female thread of the adapter.
Allen Key
(II)
Ceiling
1 2
(EE) x 2
(DD) x 2
OR
Vaulted Ceiling Adapter
(not included)
These screws are only included
with your ceiling adapter
or pipe connector.
For extension
longer than 3 ft
connect two or
more pipes
together with a
pipe connector
(not included).
(EE) x 4
(DD) x 4
OR
Pipe Connector
Allen Key
(II)
© 2016
QualGear LLC