User’s Guide Learn how to use your Fujitsu LifeBook UH900 notebook
Copyright and Trademark Information Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited.
WARNING HANDLING THE CORD ON THIS PRODUCT WILL EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. © Copyright 2009 Fujitsu America, Incorporated. All rights reserved. No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu.
IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate. Use only UL Listed I.T.E. Class II Adapters with an output rating of 19 VDC, with a minimum current of 2.1 A (40 W).
Recycling your battery Over time, the batteries that run your mobile computer will begin to hold a charge for a shorter amount of time; this is a natural occurrence for all batteries. When this occurs, you may want to replace the battery with a fresh one*. If you replace it, it is important that you dispose of the old battery properly because batteries contain materials that could cause environmental damage if disposed of improperly.
Contents Preface About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Conventions Used in the Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Fujitsu Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Chapter 1 Getting to Know Your LifeBook Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Using the Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Using the Cursor Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Button Control Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Using the Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Power/Suspend/Resume Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Sleep Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Hibernation (Save-to-Disk) Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Windows Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restoring Your Pre-installed Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Drivers and Applications Restore Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Recovery and Utility disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Automatically Downloading Driver Updates . . . . . . . . . . . . . . . . . . . . . . . 79 Chapter 5 Care and Maintenance Caring for your LifeBook Notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Glossary/Regulatory Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Appendix A: Wireless Device User’s Guide Before Using the Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 Wireless LAN Device Covered by this Document. . . . . . . . . . . . . . . . . . . 114 Characteristics of the WLAN Device . .
Preface About This Guide The LifeBook UH900 notebook from Fujitsu America is an ultra-mobile convertible computer. It is powered by an Intel® Atom™ Z530 processor, has a built-in color display with a passive digitizer, and brings the computing power of desktop personal computers (PCs) to a handheld, versatile environment. This manual explains how to operate your LifeBook UH900 notebook’s hardware and pre-installed system software. Your LifeBook UH900 notebook comes with Windows 7 Home Premium pre-installed.
THE CAUTION ICON HIGHLIGHTS INFORMATION THAT IS IMPORTANT TO THE SAFE OPERATION OF YOUR COMPUTER, OR TO THE INTEGRITY OF YOUR FILES. PLEASE READ ALL CAUTION INFORMATION CAREFULLY. THE WARNING ICON HIGHLIGHTS INFORMATION THAT CAN BE HAZARDOUS TO EITHER YOU, YOUR LIFEBOOK NOTEBOOK, OR YOUR FILES. PLEASE READ ALL WARNING INFORMATION CAREFULLY.
Fujitsu Shopping Online You can go directly to the online by going to the website at: www.shopfujitsu.com. YOU MUST HAVE AN ACTIVE INTERNET CONNECTION TO USE THE ONLINE URL LINKS. Limited Warranty Your LifeBook UH900 ultra-mobile notebook is backed by a Fujitsu International Limited Warranty. Check the service kit that came with your notebook for the Limited Warranty period and terms and conditions.
Chapter 1 Getting to Know Your LifeBook Overview This section describes the components of your Fujitsu LifeBook UH900 notebook. We strongly recommend that you read it before using your notebook – even if you are already familiar with notebook computers. Figure 1.
Locating the Controls and Connectors Connectors and peripheral interfaces on the LifeBook UH900 notebook and the external monitor/LAN adapter cable allow you to connect and control a variety of devices. Specific locations are illustrated in Figures 2 through 6. The table below provides a short description of each icon on the LifeBook UH900 notebook and/or adapter cable. Each of the icons is either molded into or printed on the notebook or cable.
Connection Notebook Icon Purpose Wireless LAN/ Bluetooth On-Off Switch The wireless LAN/Bluetooth switch allows you to turn power to the wireless LAN device and Bluetooth devices on and off. External Video port (Available using external monitor/LAN adapter cable only.) The external video port allows you to connect an external monitor or LCD projector to your computer.
Top Components The following is a brief description of your LifeBook notebook’s top components when it is open. (See Figure 2 on page 16 for location) Web Camera The .78 megapixel web camera allows you to take pictures of yourself to send over the internet. Built-in Microphone The built-in microphone allows you to input audio. Display Panel The display panel is a color LCD panel for text and graphicsdisplay and passive digitizer functionality.
Left and Right Buttons These buttons act the same as the left and right buttons on a mouse. Cursor Control The cursor control is used to move the cursor around the screen. USB port Speaker USB port SD card slot External Monitor/LAN adapter cable connector Figure 3. LifeBook UH900 notebook front components Front Components The following is a brief description of your LifeBook notebook’s front components. (See Figure 3 on page 18 for location) USB 2.0 Ports The two USB 2.
External Monitor/LAN Adapter Cable Connector This connector allows you to connect the adapter cable to your notebook. Secure Digital (SD) Card Slot The SD card slot allows you to install an SD card for data storage. This architecture allows you to transfer data from a variety of different digital devices. See “Inserting an SD Card” on page 59. Headphone Jack Strap/Pen Tether Attachment Point Air Vents Figure 4.
TO PROTECT YOUR NOTEBOOK FROM DAMAGE AND TO OPTIMIZE SYSTEM PERFORMANCE, BE SURE TO KEEP ALL AIR ALL VENTS UNOBSTRUCTED, CLEAN, AND CLEAR OF DEBRIS. THIS MAY REQUIRE PERIODIC CLEANING, DEPENDING UPON THE ENVIRONMENT IN WHICH THE SYSTEM IS USED. DO NOT OPERATE THE NOTEBOOK IN AREAS WHERE THE AIR VENTS CAN BE OBSTRUCTED, SUCH AS IN TIGHT ENCLOSURES OR ON SOFT SURFACES LIKE A BED OR CUSHION. Wireless LAN/Bluetooth Switch Air Vents DC Power Jack Figure 5.
Air Vents Lithium ion Battery Battery Latches Figure 6. LifeBook notebook bottom panel Bottom Components The following is a brief description of your LifeBook notebook’s bottom panel components. Lithium ion Battery Most of the bottom of the notebook is comprised of the internal Lithium ion battery. It can be unlatched to remove the battery when stored over a long period of time or for swapping a discharged battery with a charged Lithium ion battery.
Battery Latches The battery latches are used to secure the Lithium ion battery to the bottom of the system. Air Vents The air vents allow air to circulate through the system to cool down the components. TO PROTECT YOUR NOTEBOOK FROM DAMAGE AND TO OPTIMIZE SYSTEM PERFORMANCE, BE SURE TO KEEP ALL AIR ALL VENTS UNOBSTRUCTED, CLEAN, AND CLEAR OF DEBRIS. THIS MAY REQUIRE PERIODIC CLEANING, DEPENDING UPON THE ENVIRONMENT IN WHICH THE SYSTEM IS USED.
NumLk CapsLk ScrLk Battery Level Charge/DC In Power Hard Drive Access Figure 7. Status Indicator Panel Status Indicator Panel The Status Indicators display symbols that correspond to specific components of your Fujitsu LifeBook notebook. The LEDs below each symbol tell you how each of those components is operating. The Status Indicators are located in two different areas (Figure 7).
Battery Charge/DC-In Indicator • Orange, solid: AC adapter and battery are available and system is being charged. • Blue, solid: AC adapter and battery are available and system is fully charged, or AC adapter is plugged in but battery is not installed. • Orange, blinking: AC adapter and battery are available and waiting to charge battery (battery is out of thermal range). • Off: AC adapter is not plugged in.
• Batteries subjected to shocks, vibration or extreme temperatures can be permanently damaged. • A shorted battery is damaged and must be replaced. Hard Drive Access Indicator The Hard Drive Access indicator flickers blue when your internal hard drive is being accessed. Power Indicator The Power indicator glows blue when your system is turned on. NumLk Indicator The NumLk indicator glows blue when an optional external keypad is set in numeric keypad mode.
Display Cover Figure 8. Opening the Display Panel Display Panel Your LifeBook UH900 notebook contains an LCD display panel that is backlit for easier viewing in bright environments. Opening the Display Panel Lift the display backwards, being careful not to touch the screen with your fingers, until it is at a comfortable viewing angle.
Using Keyboard to Adjust Brightness Adjusting the brightness using the keyboard changes the system setting (i.e., the settings you make via the function keys automatically changes the brightness settings in the system’s Tablet and Pen Settings). • [Fn]+[(9]: Pressing repeatedly will lower the brightness of your display. • [Fn]+[)0]: Pressing repeatedly will increase the brightness of the display.
The Fujitsu Zoom utility has a magnifying glass icon in the Windows notification area of the Windows taskbar. You can zoom in (magnify) or zoom out (1280 x 800 resolution) by double-clicking on the icon and selecting the desired action, then using the Window key + “a” (default). You may select another key combination from the dropdown list in ‘Keyboard shortcut’. Button II is also assigned to zoom in/out with each press.
Keyboard External Display. Bright (down) Bright (up) Function Keys NumLK ScrLK Numeric Keys PrtSc SysRq 9 8 | | 4 CpsLck Caps Lock 5 1 0 6 > . Ctrl Fn Key Alt Key Alt Key Enter 3 2 . / Home/ PgUp PgDn Cursor Keys Start Key Figure 9. Keyboard Using the Keyboard Your Fujitsu LifeBook notebook has an integral 74-key keyboard. The keys perform all the standard functions of a 101-key keyboard, including the special function keys. This section describes the special keys.
Cursor Keys The cursor keys are the four arrow keys on the keyboard which are used in conjunction with the [Fn} key to allow you to move the cursor up, down, left and right in applications. In programs such as Windows Explorer, it moves the “focus” (selects the next item up, down, left, or right). Function Keys Your LifeBook notebook has 6 function keys, F1/F7, F2/F8, F3/F9, F4/F10, F5/F11, and F6/F12. The functions assigned to these keys differ for each application.
Using the Cursor Buttons Left Button Scroll Button (up) Right Button Scroll Button (down) Cursor Control Figure 10. Cursor Buttons The button array on your LifeBook notebook is used to control the movement of the cursor and to select items on your display panel. The buttons consist of a cursor control at the top right above the keyboard, left and right buttons on the top left, and scroll buttons on the right of the display.
Clicking Clicking means pushing and releasing a button. To left-click, move the cursor to the item you wish to select, press the Left button once, and then immediately release it. You can also left-click by moving the cursor to the item you wish to select, then tapping the cursor control once. To rightclick, move the cursor to the item you wish to select, press the Right button once, and then immediately release it. Figure 11.
Dragging Dragging means pressing and holding the left button, while moving the cursor control. To drag, move the cursor to the item you wish to move. Press and hold the left button while moving the item to its new location and then release it. Figure 13. Dragging Scrolling Use the Scrolling buttons on the right side of the display to navigate through a document quickly without using the window scroll bars. This is particularly useful when you are navigating through on-line pages.
Using the Touch Screen The integrated Touch Screen allows you to use your finger or a stylus as a pointing device. You can click, double-click, drag items and icons, or to draw like a pen or pencil in applications that support this behavior, such as drawing or painting programs. See the documentation that came with your application for details. Figure 15. Using the touch screen • DO NOT USE EXCESSIVE FORCE WHEN TAPPING OR WRITING ON THE SCREEN WITH THE STYLUS.
Clicking on Touch Screen To left-click, touch the object you wish to select and then lift your finger or the stylus tip immediately. Right-Clicking on Touch Screen Right-click can be accomplished by holding your fingertip or a stylus down until a circular icon appears. To change the settings for the right-click feature, go to Start > Control Panel > Pen and Input Devices. In the Pen Options tab, select Press and Hold then click the [Settings] button. Figure 16.
Dragging Dragging means moving an item with the stylus by touching the screen, moving and then lifting your fingertip or the stylus. To drag, touch the Touch Screen on the item you wish to move. While continuing to touch the screen with your fingertip or the stylus, drag the item to its new location by moving it across the screen, and then lifting your fingertip or the stylus to release it. Figure 18.
Volume Control Your Fujitsu LifeBook notebook has multiple volume controls which interact with each other. ANY SOFTWARE THAT CONTAINS AUDIO FILES WILL ALSO CONTAIN A VOLUME CONTROL OF ITS OWN. IF YOU INSTALL AN EXTERNAL AUDIO DEVICE THAT HAS AN INDEPENDENT VOLUME CONTROL, THE VOLUME CONTROLS WILL INTERACT WITH EACH OTHER. Controlling the Volume The volume can be controlled in several different ways: • Volume can be changed or muted from within the Volume Control in the system tray.
NOTE: Arrows point to icons. In all cases, the actual button is adjacent to the icon. Zoom Button + ECO Button ECO Application A Button A Scroll Up Button Scroll Down Button Figure 19. LifeBook UH900 Notebook Application Buttons LifeBook Application Buttons A unique feature of your LifeBook UH900 notebook is the array of Application buttons. These buttons allow you to launch specific applications and functions with the touch of a button.
Application Button A The Application A Button can be used to automatically open pre-selected applications. Scroll Up and Scroll Down Buttons The Scroll Up and Down Buttons can be used to navigate through multiple pages. They can also be used to automatically open pre-selected applications. Changing Button Functions Any of the five buttons can be changed to launch a program or perform an action you select.
Using the Touch Launcher The Touch Launcher is a handy on-screen method for quickly launching commonly-used applications and performing Internet tasks. Depending upon your operating environment, the launcher will either be in Launcher Mode (Fig. 20) or Internet Mode (Fig. 21). In Launcher Mode, certain Windows actions can be performed such as Print and Close Window. Additional buttons can be programmed to launch additional applications that you select.
Chapter 2 Getting Started with Your LifeBook Power Sources Your Fujitsu LifeBook notebook has three possible power sources: a primary Lithium ion battery, an AC adapter or an optional Auto/Airline adapter. Connecting the Power Adapters The AC adapter or optional Auto/Airline adapter provides power for operating your notebook and charging the batteries. Connecting the AC Adapter 1 Plug the DC output cable into the DC power jack of your LifeBook notebook (Figure 22).
Switching from AC Adapter Power or the Auto/Airline Adapter to Battery Power 1 2 Be sure that you have at least one charged battery installed. Remove the AC adapter or the Auto/Airline adapter. THE LITHIUM ION BATTERY IS NOT CHARGED UPON PURCHASE. INITIALLY, YOU WILL NEED TO CONNECT EITHER THE AC ADAPTER OR THE AUTO/AIRLINE ADAPTER TO USE YOUR NOTEBOOK. AC Cable DC Power Jack DC Output Cable AC Adapter Figure 22.
Starting Your LifeBook Notebook Power On Power/Suspend/Resume Button The Power/Suspend/Resume button allows you to suspend notebook activity without powering off, resume your LifeBook notebook from sleep mode, and power on your notebook when it has been shut down from Windows. WHEN YOU TURN ON YOUR LIFEBOOK NOTEBOOK, BE SURE YOU HAVE A POWER SOURCE. THIS MEANS THAT AT LEAST ONE BATTERY IS INSTALLED AND CHARGED, OR THAT THE AC OR AUTO/AIRLINE ADAPTER IS CONNECTED AND HAS POWER.
NEVER TURN OFF YOUR LIFEBOOK NOTEBOOK DURING THE POWER ON SELF TEST (POST) OR IT WILL CAUSE AN ERROR MESSAGE TO BE DISPLAYED WHEN YOU TURN YOUR LIFEBOOK NOTEBOOK ON THE NEXT TIME. See “Power On Self Test Messages” on page 73. Boot Sequence The procedure for starting-up your notebook is termed the Bootup sequence and involves your notebook’s BIOS. When your LifeBook notebook is first turned on, the main system memory is empty, and it needs to find instructions to start up your notebook.
BIOS Setup Utility The BIOS Setup Utility is a program that sets up the operating environment for your LifeBook notebook. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS’ environment to operate your notebook. The BIOS Setup Utility configures: • Device control feature parameters, such as changing I/O addresses and boot devices. • System Data Security feature parameters, such as passwords.
BIOS Guide A guide to your notebook’s BIOS is available online. Please visit our service and support website at http://www.computers.us.fujitsu.com/support, then select User’s Guides under Online Support. Select your Product, Series, and Model, then click [Go]. Under the Manuals tab, select the BIOS Guide. Booting the System We strongly recommend that you not attach any external devices until you have gone through the initial power on sequence.
ClickMe! Installing ClickMe! BEFORE INSTALLING THE CLICKME! UTILITY, BE SURE THE WIRELESS LAN DEVICE IS ENABLED BY PRESSING THE [FN] + [F5] KEY COMBINATION. The first time you boot up your system, you will see an icon called Click Me! in the Start menu. It is very important that you run the ClickMe! utility the first time you boot up in order to ensure that the necessary applications, utilities. and drivers are installed.
Power Management Your LifeBook notebook has many options and features for conserving battery power. Some of these features are automatic and need no user intervention. However, others depend on the parameters you set to best suit your operating conditions, such as those for the display brightness. Internal power management for your notebook may be controlled from settings made in your operating system, pre-bundled power management application, or from settings made in BIOS setup utility.
Your notebook can be put in Sleep mode by: • Pressing the Power/Suspend/Resume button when your system is turned on. • Selecting Sleep (“Standby” in Windows XP) from the Windows Shut Down menu. • Timing out from lack of activity. • Allowing the battery to reach the Dead Battery Warning condition. System memory typically stores the files on which you are working, open application information, and any other data required to support operations in progress.
2 3 From the Control Panel select System and Security, then select Power Options.. Select Choose what the power button does or Choose what closing the lid does, then make your selection (Do Nothing, Sleep, Hibernate, or Shut Down). You can also go directly into Hibernate mode by going to the Start menu, clicking the small arrow to the right of the [Shut Down] button, then clicking on Hibernate.
Using the correct procedure to shut down from Windows allows your notebook to complete its operations and turn off power in the proper sequence to avoid errors. The proper sequence is: Click the [Start] button, and then move the mouse over the [Shut Down] button at the bottom right of the right-hand pane. Click the button to shut down the system. If you are going to store your notebook for a month or more, see Care and Maintenance Section.
To learn more about the important ENERGY STAR program, visit: www.energystar.gov. To read about how Fujitsu is supporting Sustainable Management along with several other environmental activities, visit the Fujitsu Corporate Citizenship page at: http://www.computers.us.fujitsu.com/www/content/aboutus/environmental/environment.
Chapter 3 User-Installable Features Lithium ion Battery Your LifeBook notebook has a Lithium ion battery that provides power for operating your notebook when no external power source is available. The battery is durable and long lasting, but should not be exposed to extreme temperatures, high voltages, chemicals, or other hazards. The Lithium ion battery operating time may become shorter if it is used under the following conditions: • When used at temperatures that exceed a low of 5°C or a high of 35°C.
• BATTERY LIFE WILL VARY BASED ON SCREEN BRIGHTNESS, APPLICATIONS, FEATURES, POWER MANAGEMENT SETTINGS, BATTERY CONDITION AND OTHER CUSTOMER PREFERENCES. OPTICAL DRIVE OR HARD DRIVE USAGE MAY ALSO HAVE A SIGNIFICANT IMPACT ON BATTERY LIFE. THE BATTERY CHARGING CAPACITY IS REDUCED AS THE BATTERY AGES. IF YOUR BATTERY IS RUNNING LOW QUICKLY, YOU SHOULD REPLACE IT WITH A NEW ONE. • UNDER FEDERAL, STATE, OR LOCAL LAW IT MAY BE ILLEGAL TO DISPOSE OF BATTERIES BY PUTTING THEM IN THE TRASH.
USING HEAVY CURRENT DEVICES OR FREQUENT EXTERNAL OPTICAL DRIVE ACCESSES MAY PREVENT CHARGING COMPLETELY. Low Battery State When the battery is running low, a low battery notification message will appear. If you do not respond to the low battery message, the batteries will continue to discharge until they are too low to operate. When this happens, your notebook will go into Sleep mode. There is no guarantee that your data will be saved once the notebook reaches this point.
Replacing the Battery With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not charged. There are two ways to swap batteries, cold-swapping and hot-swapping: Cold-swapping Batteries To cold-swap batteries, follow these easy steps (Figure 23): 1 2 3 4 5 Have a charged battery ready to install. 6 Insert a new battery into the bay, and press it in firmly so that the left latch clicks into place, then slide the right latch to the righ to lock it.
Battery Pack Battery Latches Figure 23. Removing a Battery 2 Follow steps 3 through 6 in “Cold Swapping Batteries”. IF THE LITHIUM ION BATTERY CONNECTOR IS NOT FULLY SEATED, YOU MAY NOT BE ABLE TO USE YOUR NOTEBOOK OR CHARGE YOUR BATTERY.
SD Card Slot SD Card Figure 24. Installing a Secure Digital Card Secure Digital (SD) Cards Your LifeBook notebook supports Secure Digital (SD) cards, on which you can store and transfer data to and from a variety of digital devices. These cards use flash memory architecture, which means they don’t need a power source to retain data. Secure Digital is a flash memory technology that allows portable storage among a variety of devices, such as cell phones, GPS systems, digital cameras, and PDAs.
Inserting an SD Card SD Cards are inserted in the SD Card slot. To install an SD Card, follow these steps: INSTALLING OR REMOVING AN SD CARD DURING YOUR LIFEBOOK NOTEBOOK’S SHUTDOWN OR BOOTUP PROCESS MAY DAMAGE THE CARD AND/OR YOUR LIFEBOOK NOTEBOOK. DO NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS LIFEBOOK NOTEBOOK, OR BOTH. YOU MAY PERMANENTLY DAMAGE THE CARD, YOUR 1 See your specific card manual for instructions on the installation of your card.
Device Ports Your Fujitsu LifeBook notebook and the External Monitor/LAN adapter cable come equipped with multiple ports to which you can connect external devices including: disk drives, keyboards, printers, etc. The following table indicates the ports on the system and/or the adapter cable. Port Type Notebook Quantity Adapter Cable Quantity USB 2.
DUE TO ONGOING CHANGES IN USB TECHNOLOGY AND STANDARDS, NOT ALL USB DEVICES AND/OR DRIVERS ARE GUARANTEED TO WORK. External Video Port The external video port allows you to connect an external monitor or LCD projector. Note that in order to use a video device directly with the system, you must first attach the included external video/LAN adapter cable.
Headphone Jack The headphone jack allows you to connect headphones or powered external speakers to your notebook. Your headphones or speakers must be equipped with a 1/8” (3.5 mm) stereo mini-plug. In order to connect headphones or speakers follow these easy steps: 1 2 Align the connector with the port opening. Push the connector into the port until it is seated.
Chapter 4 Troubleshooting Your LifeBook Troubleshooting There may be occasions when you encounter simple setup or operating problems that you can solve on the spot, or problems with peripheral devices that can be solved by replacing the device. The information in this section helps you isolate and resolve some of these straightforward issues and identify failures that require service.
IF YOU KEEP NOTES ABOUT WHAT YOU HAVE TRIED, YOUR SUPPORT REPRESENTATIVE MAY BE ABLE TO HELP YOU MORE QUICKLY BY GIVING ADDITIONAL SUGGESTIONS OVER THE PHONE. 8 If you have tried the solutions suggested in the Troubleshooting Table without success, contact your support representative: Toll free: 1-800-8Fujitsu (1-800-838-5487) Web site: http://www.computers.us.fujitsu.com/support.
Specific Problems Using the Troubleshooting Table When you have problems with your LifeBook notebook, try to find the symptoms under the Problem column of the troubleshooting table for the feature giving you difficulty. You will find a description of common causes for that symptom under the column Possible Cause and what, if anything, you can do to correct the condition under Possible Solutions. All possible causes or solutions may not apply to your notebook.
Problem Possible Cause Possible Solutions There is no sound coming from the built-in speaker (continued) The speakers have been muted using the Volume icon in the system tray. Click on the Volume icon in the system tray on the bottom right of the screen. (It looks like a speaker). If the Mute box has a red circle on it, click on it to deselect it. Optical Drive Problems (optional external device) LifeBook notebook fails to recognize optical discs. The disc is not pushed down on raised center circle.
Problem Possible Cause Possible Solutions Keyboard or Mouse Problems The built-in keyboard does not seem to work. You have installed an external keyboard or mouse, and it does not seem to work. An external keyboard or a mouse and it seems to be locking up the system. The notebook has gone into Sleep mode. Push the Power/Suspend/Resume button. Your application has locked out your keyboard. Try to use your integrated pointing device to restart your system.
Problem Possible Cause Possible Solutions You have installed a USB device. Your LifeBook notebook does not recognize the device, or the device does not seem to work properly. (continued) The device may have been installed while an application was running, so the notebook is not aware of its installation. Close the application and restart your notebook. The installed battery is completely discharged or there is no Power adapter (AC or Auto/Airline) installed.
Problem Possible Cause Possible Solutions Your LifeBook notebook turns off all by itself. The power management parameters are set for auto timeouts which are too short for your operating needs. Press any button on the keyboard, or move the mouse to restore operation. If that fails, push the Power/ Suspend/ Resume button. Check your power management settings, or close your applications and go to the Power Options located in the Control Panel to adjust the timeout values to better suit your needs.
Problem Possible Cause Possible Solutions The battery seems to discharge too quickly. (continued) You are running an application that uses a lot of power due to frequent hard drive access or optical drive access, or use of a Wireless LAN, or Bluetooth device. Use a power adapter for this application when at all possible. The brightness is turned all the way up. Turn down the brightness adjustment. The higher the brightness the more power your display uses. The battery is very old.
Problem Possible Cause Possible Solutions An error message is displayed on the screen during the boot sequence. Power On Self Test (POST) has detected a problem. See the (POST messages to determine the meaning/severity of the problem. Not all messages are errors; some are status indicators. See “Power On Self Test Messages” on page 73. Your notebook appears to change setup parameters when you start it. BIOS setup changes were not saved when made and you exited the setup utility.
Problem Possible Cause Possible Solutions The display goes blank by itself after you have been using it. (continued) Power management timeouts may be set for short intervals and you failed to notice the display toggle on and off. Press any button on the keyboard, or move the mouse to restore operation. If that fails, push the Power/Suspend/ Resume button. (The display may be shut off by Sleep Mode, Auto Suspend or Video Timeout) The display has bright or dark spots.
Power On Self Test Messages The following is an alphabetic list of error-and-status messages that Phoenix BIOS and/or your operating system can generate and an explanation of each message. Error messages are marked with an *. If an error message is displayed that is not in this list, write it down and check your operating system documentation both on screen and in the manual. If you can find no reference to the message and its meaning is not clear, contact your support representative for assistance.
*Incorrect Drive A type – run SETUP Type of floppy drive A: not correctly identified in Setup. This means that the floppy disk drive type identified in your setup utility does not agree with the type detected by the Power On Self Test. Run the setup utility to correct the inconsistency. *Incorrect Drive B type – run SETUP Type of floppy drive B: not correctly identified in Setup.
*Operating system not found Operating system cannot be located on either drive A: or drive C: Enter the setup utility and see if both the fixed disk, and drive A: are properly identified and that the boot sequence is set correctly. Unless you have changed your installation greatly, the operating system should be on drive C:. If the setup utility is correctly set, your hard drive may be corrupted. *Parity Check 1 nnnn Parity error found in the system bus.
nnnn Shadow RAM Passed Where nnnn is the amount of shadow RAM in kilobytes successfully tested. *System battery is dead – Replace and run SETUP The BIOS CMOS RAM memory hold up battery is dead. This is part of your BIOS and is a board mounted battery which requires a support representative to change. You can continue operating but you will have to use setup utility default values or reconfigure your setup utility every time you turn off your notebook.
Restoring Your Pre-installed Software Packed with your system you will find two discs for recovering your pre-installed software: • Drivers and Applications Restore Disc • Recovery and Utility Disc Drivers and Applications Restore Disc The Drivers and Applications Restore (DAR) disc included with your system contains sets of device drivers and Fujitsu utilities (in specific directories) that are unique to your computer configuration.
THE COMPONENTS LISTED ARE COLOR-CODED IN TERMS OF THEIR INSTALL STATUS. BLUE INDICATES THAT THE COMPONENT CAN BE INSTALLED. GREEN INDICATES THAT THE COMPONENT NEEDS TO BE INSTALLED SEPARATELY. GREY INDICATES A COMPONENT THAT IS ALREADY INSTALLED; GREY ITEMS CAN BE REINSTALLED, BUT PRIOR TO INSTALLATION YOU WILL RECEIVE A REMINDER THAT THE COMPONENT IS ALREADY INSTALLED. 4 In the list, check off all the components you want to install. If you want to install all components, click [Select All].
Automatically Downloading Driver Updates Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. NOTE THAT IF YOU HAVE A 64-BIT OPERATING SYSTEM, IT WILL BE NECESSARY FOR YOU TO FIRST DOWNLOAD AND INSTALL THE FDU UTILITY. TO DO SO, GO TO THE FUJITSU SUPPORT WEB SITE AT HTTP://WWW.FUJITSU.COM/US/SUPPORT AND FOLLOW THE LINKS TO THE DOWNLOADS.
Chapter 5 Care and Maintenance Caring for your LifeBook Notebook If you use your Fujitsu LifeBook notebook carefully, you will increase its life and reliability. This section provides some tips for looking after the notebook and its devices. • THE SYSTEM CONTAINS COMPONENTS THAT CAN BE SEVERELY DAMAGED BY ELECTROSTATIC DISCHARGE (ESD). TO MINIMIZE RISK TO THE COMPONENTS, OBSERVE THE FOLLOWING PRECAUTIONS: - BE SURE TO POWER DOWN YOUR SYSTEM BEFORE ADDING OR REMOVING SYSTEM COMPONENTS.
• Do not attempt to service the computer yourself. Always follow installation instructions closely. • Keep it away from food and beverages. • To protect your notebook from damage and to optimize system performance, be sure to keep all air all vents unobstructed, clean, and clear of debris. This may require periodic cleaning, depending upon the environment in which the system is used.
• Always shut down the computer, unplug the power adapter, and remove the battery when cleaning or disinfecting the computer exterior, keyboard or LCD display.
Storing your LifeBook notebook • If storing your notebook for a month or longer, turn your LifeBook notebook off, fully charge the battery(s), then remove and store all Lithium ion batteries. • Store your notebook and batteries separately. If you store your LifeBook with a battery installed, the battery will discharge, and battery life will be reduced. In addition, a faulty battery might damage your LifeBook. • Store your Fujitsu LifeBook in a cool, dry location.
• Never put your notebook through a metal detector. Have your notebook hand-inspected by security personnel. You can however, put your notebook through a properly tuned X-ray machine. To avoid problems, place your notebook close to the entrance of the machine and remove it as soon as possible or have your notebook hand-inspected by security personnel. Security officials may require you to turn your notebook on, so make sure you have a charged battery on hand.
Media Care Caring for your Media (DVD/CD/CD-R) If you have an optional external optical drive connected to your system, be sure to handle the media discs carefully. Media discs are precision devices and will function reliably if given reasonable care. • Always store your media disc in its case when it is not in use. • Always handle discs by the edges and avoid touching the surface. • Avoid storing any media discs in extreme temperatures. • Do not bend media discs or set heavy objects on them.
• Avoid using or storing the drive where it is damp or dusty. • Avoid using or storing the drive near magnets or devices that generate strong magnetic fields. • Avoid using or storing the drive where it will be subjected to shock or vibration. • Do not disassemble or dismantle the optical drive. • Use of a commercially available lens cleaner is recommended for regular maintenance of your drive.
Chapter 6 System Specifications Specifications This section provides the hardware and environmental specifications for your Fujitsu LifeBook notebook. Specifications of particular configurations will vary. Configuration Label The configuration label located on the bottom of your notebook contains specific information regarding the options you’ve chosen for your notebook. Following is an example configuration label.
Microprocessor Intel® Atom™ Processor Z530 (Refer to the system label to determine the speed of your processor). Chipset Intel® System Controller Hub US15W Memory System Memory • DDR2-533 MHz SDRAM dual-channel memory module. • Total of 2 GB pre-installed. No DIMM slots for expansion. Cache Memory • 512 KB L2 cache on-die Video Built-in color flat-panel TFT active matrix LCD display with simultaneous display capability. Video Color and Resolution 5.
• Stereo headphone jack, 3.5 mm, 400mVrms or less, minimum impedance 32 Ohms • One built-in speaker, 16 mm diameter, mono • One built-in digital microphone Mass Storage Device Options Hard Drive • 60 GB solid-state hard disk drive Features Integrated Pointing Device • Left and right buttons • Cursor control button Communications • Internal LAN: Internal wired 10/100 Ethernet LAN • WLAN: Integrated Atheros® AR5B91 (IEEE 802.
Keyboard Built-in keyboard • Total number of keys: 75 • Function keys: [F1/F7] through [F6/F12] when used in conjunction with [Fn] key • Two Windows keys: one Start key, one application key • Key pitch: 16 mm; key stroke: 1.2 mm • Built-in cursor control button with left and right buttons and scroll buttons. • External USB keyboard/mouse support Power Batteries • Standard Lithium ion battery, rechargeable, 2-cell 7.2V, 1800 mAh, or, • High-capacity Lithium ion battery, rechargeable, 4-cell 7.
With 4-cell battery: Approximately 6.73"(w) x 6.14"(d) x 1.16”/1.46”(h) (171.0 mm x 156.0 mm x 29.5/37.0 mm) Weight Approximately 1.56 lbs. (707 g) with battery Environmental Requirements Temperature Operating: 41° to 95° F (5° to 35° C). Non-operating: 5° to 140° F (–15° to 60° C) Humidity Operating: 20% to 85%, relative, non-condensing.
• Google Toolbar • Norton Internet Security • Fujitsu Driver Update utility • Microsoft Office Activation Assistant • Microsoft Touch Pack • Microsoft Works with Office 2007 Student and Home Trial Edition • Operating System: Microsoft Windows 7 Home Premium Learning About Your Software Tutorials All operating systems and most application software have tutorials built into them upon installation. We highly recommend that you step through the tutorial before you use an application.
Norton Internet Security Your system is preinstalled with a free 90-day trial version of Symantec’s Norton Internet Security™ software. Internet Security is a suite of tools designed to protect your LifeBook from viruses, hackers, spam, and spyware. It helps protect data currently on your hard disk from destruction or contamination. The trial version is activated upon your acceptance of software license agreement.
Fujitsu offers a Media License Kit for Microsoft® Office Small Business 2007. Simply enter your product key and you’re ready to go! Another option is to purchase a Microsoft® Office 2007 media-less license kit (MLK) from either your computer reseller or online from Microsoft within 90 days of the purchase of your computer.
Glossary AC Adapter A device which converts the AC voltage from a wall outlet to the DC voltage needed to power your LifeBook notebook. Access point Wireless network device used to bridge wireless and wired network traffic. ACPI Advanced Configuration and Power Interface Active-Matrix Display A type of technology for making flat-panel displays which has a transistor or similar device for every pixel on the screen.
Auto/Airline Adapter A device which converts the DC voltage from an automobile cigarette lighter or aircraft DC power outlet to the DC voltage needed to power your LifeBook notebook. BIOS Basic Input-Output System. A program and set of default parameters stored in ROM which tests and operates your LifeBook notebook when you turn it on until it loads your installed operating system from disk.
CardBus A faster, 32-bit version of the PC Card interface which offers performance similar to the 32-bit PCI architecture. CD-ROM Compact disk read only memory. This is a form of digital data storage which is read optically with a laser rather than a magnetic head. A typical CD-ROM can contain about 600MB of data and is not subject to heads crashing into the surface and destroying the data when there is a failure nor to wear from reading.
Default Value A pre-programmed value to be used if you fail to set your own. DHCP Dynamic Host Configuration Protocol. A protocol used to automatically acquire parameters required for the communication, such as IP address. The sender of IP address is called a DHCP server, and the receiver is called a DHCP client. DIMM Dual-in-line memory module. Disk A spinning platter of magnetic data storage media.
DNS Domain Name System. A function to control the association between the IP address and the name assigned to the computer. If you do not know the IP address but if you know the computer name, you can still communicate to that computer. DOS Disk Operating System (MS-DOS is a Microsoft Disk Operating System).
ESD Electrostatic Discharge. The sudden discharge of electricity from a static charge which has built-up slowly. Example: the shock you get from a doorknob on a dry day or the sparks you get from brushing hair on a dry day. FCC Federal Communication Commission. GB Gigabyte. One billion bytes. Hard drive A spinning platter of magnetic data storage media where the platter is very stiff. I/O Input/Output. Data entering and leaving your notebook in electronic form.
IEEE802.11g Wireless LAN standard that supports a maximum data rate of 54 Mbps. 802.11g devices operate in the 2.4 GHz ISM band. IEEE802.11n Wireless LAN standard that supports a maximum data rate of 540 Mbps (tentative). 802.11n devices operate in the 2.4 GHz and 5 GHz bands. Infrared Light just beyond the red portion of the visible light spectrum which is invisible to humans. Infrastructure A name of a wireless LAN configuration. This type of communication uses an access point.
Class B - supports 65,000 hosts on each of 16,000 networks Class C - supports 254 hosts on each of 2 million networks The number of unassigned Internet addresses is running out, so a new classless scheme called CIDR is gradually replacing the system based on classes A, B, and C and is tied to adoption of IPv6. IR An abbreviation for infrared. IrDA Infrared Data Association. An organization which produces standards for communication using infrared as the carrier. IRQ Interrupt Request.
MAC Address Media Access Control Address. A unique physical address of a network card. For Ethernet, the first three bytes are used as the vendor code, controlled and assigned by IEEE. The remaining three bytes are controlled by each vendor (preventing overlap), therefore, every Ethernet card is given a unique physical address in the world, being assigned with a different address from other cards. For Ethernet, frames are sent and received based on this address. MB Megabyte. One million bytes.
MTU Maximum Transmission Unit The maximum data size that can be transferred at a time through the Internet or other networks. You can set a smaller MTU size to obtain successful communication, if you have difficulty transferring data due to the fact that the maximum size is too large. Network key Data that is used for encrypting data in data communication.
Partition A block of space on a hard drive which is set aside and made to appear to the operating system as if it were a separate disk, and addressed by the operating system accordingly. Peripheral Device A piece of equipment which performs a specific function associated with but not integral to a computer. Examples: a printer, a modem, a CD-ROM. Pitch (keyboard) The distance between the centers of the letter keys of a keyboard.
Protocol Procedures and rules use to send and receive data between computers. - Method of sending and receiving data - Process used to handle communication errors Conditions required for communication are organized in procedures for correct transfer of information. RAM Random Access Memory. A hardware component of your LifeBook notebook that holds binary information (both program and data) as long as it has the proper power applied to it.
SDRAM Synchronous Dynamic Random Access Memory. Serial Port A connection to another device through which data is transferred one bit at a time on a single wire with any other wires only for control of the device not for transfer of data. Shared key authentication 802.11 network authentication method in which the AP sends the client device a challenge text packet that the client must then encrypt with the correct WEP key and return to the AP.
Subnet mask TCP-IP network is controlled by being divided into multiple smaller networks (subnets). IP address consists of the subnet address and the address of each computer. Subnet mask defines how many bits of IP address comprise the subnet address. The same value shall be set among computers communicating with each other. SVGA Super VGA. S-Video Super Video. A component video system for driving a TV or computer monitor.
WFM Wired for Management is Intel’s broad-based initiative to reduce the total cost of ownership (TCO) of business computing without sacrificing power and flexibility. Wi-Fi Compatible Wi-Fi (Wireless Fidelity) Identifies that the product has passed the interoperability test, supplied by the WECA (Wireless Ethernet Compatibility Alliance), which guarantees the interoperability of wireless IEEE 802.11 LAN products. For more information on the Wi-Fi standard, go to the WECA Web site at: www.
Regulatory Information Notice Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate the equipment. FCC NOTICES Notice to Users of Radios and Television This equipment has been tested and found to comply with the limit for class B digital devices, pursuant to parts 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix A: Wireless Device User’s Guide FCC Regulatory Information Please note the following regulatory information related to the optional wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are much less than the electromagnetic energy emissions from wireless devices such as mobile phones.
interference caused by such unauthorized modification, substitution or attachment. The manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines. This device must not be co-located or operated in conjunction with any other antenna or transmitter. For IEEE 802.11a Wireless LAN: For operation within 5.15~5.
DO NOT USE THE NOTEBOOK ON YOUR LAP. USING IT ON YOUR LAP WILL BLOCK THE AIR VENTS, WHICH COULD RESULT IN DAMAGE TO THE SYSTEM AND ALSO CAN REDUCE THE RF EXPOSURE SAFETY DISTANCE DURING RADIO OPERATION. Export restrictions This product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce export license. This device complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB 003 B.
Before Using the Wireless LAN This manual describes the procedures required to properly set up and configure the integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure it's correct operation. Keep this manual in a safe place for future reference. Wireless LAN Device Covered by this Document This document is applicable to systems containing Atheros® AR5B91 wireless network card (802.
Wireless LAN Modes Using this Device Ad Hoc Mode "Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer fashion. That is why Ad Hoc networks are also known as peer-to-peer networks.
Access Point (Infrastructure) Mode Infrastructure mode refers to a wireless network architecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., file servers, printers, databases).
How to Handle This Device The WLAN device is a device that comes pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. The operating system that your mobile computer comes with has been pre-configured to support the WLAN device. • The Atheros WLAN device supports EEE802.11b, IEEE802.11g and IEEE802.11n. • The WLAN device operates in the 2.4 GHz ISM band and the 5 GHz lower, middle, and upper UNII bands.
Deactivation Using the Wireless On/Off Switch The WLAN device can be deactivated quickly and efficiently by toggling the Wireless LAN/Bluetooth On/Off Switch to the Off position. The switch has no effect on non-Wireless LAN models. The switch is located on the left side of the system (Figure 30) WLAN/Bluetooth Switch Figure 30.
Configuring the Wireless LAN The WLAN device can be configured to establish wireless network connectivity using the software that is built into Windows. Support for most industry standard security solutions is contained in this software. Pre-defined parameters will be required for this procedure. Please consult with your network administrator for these parameters: Configuring the WLAN Using Windows 1 2 3 4 5 Click the Start button, then select Control Panel.
Troubleshooting the WLAN Troubleshooting Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table.
Problem Unavailable network connection (continued) Possible Cause Possible Solution The computer to be connected is turned off Check if the computer to be connected is turned ON. RF interference from Access Points or other wireless networks The use of identical or overlapping RF channels can cause interference with the operation of the WLAN device. Change the channel of your Access Point to a channel that does not overlap with the interfering device.
WLAN Specifications Specifications Item Specification Type of network The Atheros AR5B91 Wireless network card conforms to IEEE802.11b, IEEE802.11g, and IEEE802.11n, Wi-Fi based* Transfer rate (Automatic switching) 54 Mbps maximum data rate (IEEE802.11n to be determined Active frequency Typical operating distances** Number of channels • • 802.11n : 2.4 GHz or 5 GHz • • • 802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft. (91 m) @ 1 Mbps • • 802.11b/g: 11 channels, 3 non-overlapping channels 802.
* “Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the interconnectivity of wireless LAN (Wi-Fi Alliance) has been passed. ** The communication ranges shown above will increase or decrease depending on factors such as number of walls, reflective material, or interference from external RF sources.
Using the Bluetooth Device The Integrated Bluetooth module (CSR BSMAN3) is an optional device available for Fujitsu mobile computers. What is Bluetooth Bluetooth technology is designed as a short-range wireless link between mobile devices, such as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create Personal Area Networks (PANs) between devices in short-range of each other.
FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The Bluetooth antenna is located above the [Backspace/Delete] key and is exempt from minimum distance criteria due to its low power. The transmitters in this device must not be co-located or operated in conjunction with any other antenna or transmitter.
Index A About This Guide 11 AC adapter 41 plug adapters 83 Air Vents 19, 20, 22 Application Buttons 1 and 2 39 Auto/Airline Adapter 41, 42 BIOS guide 46 setup utility 45 Bluetooth 124 Boot Sequence 44 Booting the System 46 Built-in Microphone 17 Button Functions 39 B C Click Me! 47 clicking 32 Configuration Label 87 Contact Information 12 Controls and Connectors 15 Conventions Used in the Guide 11 Ctrl-Alt-Del Button 18 Cursor Buttons button control adjustment 33 clicking 32 double-clicking 32 dragging 3
D H DC in connector 15 DC Output Cable 41 DC Power Jack 20, 41 Device Ports 60 Display Panel 17, 26 brightness 26 opening 26 problems 71, 72 Double-Clicking 32 Down and Up Buttons 39 dragging 32 Drivers and Application Restore CD 77 Handling the System 28 Hard Disk Drive Passwords 44 Headphone Jack 15, 19, 62 Hibernation Feature 49 disable/enable 49 K Keyboard 17, 29 problems 67 Keyboard Lights 17 L Error Messages 73 External Monitor/LAN Adapter Cable Connector 18 External Video Port 16, 61 LAN Jack
ArcSoft WebCam Companion 91 Google Toolbar 93 manuals 92 Microsoft Origami 92 Microsoft Works 92 Start Key 29 Status Indicator Panel 17, 23 Battery Charge/DC-In Indicator 24 Battery Level Indicator 24 CapsLock 25 Hard Disk Drive access indicator 25 Hard Drive Access Indicator 25 NumLk 25 Power Indicator 25 ScrLk 25 Suspend/ Resume button 15 R Regulatory Information 110 Restarting 50 Restoring Your Pre-installed Software 77 Right Button 18 RJ-45 62 T S Touch Screen calibrating 36 clicking 35 Double-Clic
W Warranty 13 Web Camera 17 Windows Power Management 50 Wireless LAN before using 114 characteristics 114 deactivating/disconnecting 117 modes 115 specifications 122 troubleshooting 120 Wireless LAN/Bluetooth On/Off Switch 16, 19 129
