+Cam Outdoor HD/+CAM-HD-AW (All Weather)
+CAM HD AW Quick Start Guide CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
+CAM HD AW Quick Start Guide Regulatory Notices for USA This equipment has been tested and found to comply with the limits for a digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
+CAM HD AW Quick Start Guide Camera Mounting 1. Camera 4.Power Supply Unit extension cord 7. Weight 2. Antenna 5.Screw(s) 8. Wall Bracket Screws 3. Adjustment Screw 6.Mounting Plate 9. Wall Please follow the directions to install the camera outdoor: Mount the camera in a position outside to ensure the most comprehensive view for video monitoring.
+CAM HD AW Quick Start Guide Outdoor Wall-Mount 1. 2. 3. 4. 5. 6. Remove weight (figure 7) and mark the location of each screw placement of the mounting plate (figure 6) as well as for the power supply unit extension cord (figure 4). Drill pilot holes for the wall bracket screws (figure 8) and power supply unit extension cord (figure 4) into the wall. Attach screws to the wall mounting plate.
+CAM HD AW Quick Start Guide 1. iSecurity+ App To get started, download the iSecurity+ app from Apple’s App store or the Google Play Store. 2. Connect to Power Connect the +Cam Outdoor HD to the AC power adapter, then plug your power cord into the electrical outlet.
+CAM HD AW Quick Start Guide 3a. Wi-Fi Setup Mode Hold down the power/reset button on the back of the camera for a few seconds to start up the +Cam Outdoor HD The “Wi-Fi Setup” LEDs in the front of the cam will glow green and the +Cam Outdoor HD will connect. (This may take up to 2 minutes when the camera is first powered on.
+CAM HD AW Quick Start Guide 3b. Connect device to +Cam Outdoor HD iOS Android Go to your device’s settings -> Under the Wi-Fi setting, connect to the +CAM-HD-AWXXXX (last 4 digits of Cam ID) network.
+CAM HD AW Quick Start Guide 4a. Launch iSecurity+ App Once your device establishes its connection to the +CAM-HD-AW, (usually takes around 30 seconds,) launch the iSecurity+ App. If you don’t see the pop up prompt, please close the app and relaunch it. iSecurity+ app will automatically detect your camera. When prompted, click ‘Yes’ to setup your camera.
+CAM HD AW Quick Start Guide 4b. Setup Wizard Follow the instructions in the Camera Setup Wizard to complete installation.
+CAM HD AW Quick Start Guide 4c. Setup Complete Once you see the page below, the setup process has been completed. Restart iSecurity+ and please log in again. You can use your iOS/ Android devices to access the camera anywhere in the world. Make sure your phone has access to the internet via 3G, 4G or Wi-Fi for internet connection.
+CAM HD AW Quick Start Guide 5. Using iSecurity+&Main Features Window Please enter your user name and password, created during the setup process to access your +CAM HD AW.
+CAM HD AW Quick Start Guide 6a. iSecurity+ Features – Camera Viewer Swipe directional controls to change the camera Pan & Tilt view.
+CAM HD AW Quick Start Guide 6b. Zoom Function Zooming In - Touch the screen with two fingers together and slide outward at an angle and the image will zoom in. Zooming Out - Touch the screen with two fingers apart and slide inwards at an angle and it will zoom out.
+CAM HD AW Quick Start Guide 6c. Audio Talkback 1. To use Audio Talkback, first press the Audio button to initiate sound to listen in. 2. Then press the Audio Talkback button and speak into your device, then let go for the audio to transfer to the camera’s speaker.
+CAM HD AW Quick Start Guide Safety Information Do not point the camera directly at the sun, or else it will damage the image sensor. Keep the camera away from heat to avoid electric shock. Do not attempt to open, dismantle, repair, or service the camera. Doing so may cause electric shock and other hazards. Any evidence of misuse, abuse, or tampering will void the Limited Warranty.
+CAM HD AW Quick Start Guide Troubleshooting LED Status Indicators During Wi-Fi Setup Mode Green: Setup mode on Orange: Setup mode initializing Light Off: Setup mode off During Normal Operation Green: Connected to iSecurity+ Orange: Connected to local Network Flashing Orange: Not connected to any network 17
+CAM HD AW Quick Start Guide Reset button If the camera has shut down, please hold down the power button on the back of the camera for 20 seconds to reset the camera.
+CAM HD AW Quick Start Guide For More Information To get the latest camera driver updates or to learn more about Imogen Studio products, please visit: www.imogenstudio.com To get the latest software updates or to learn more about Seedonk, please visit: www.isecurityplus.
Revised Nov 18, 2014 ©ImogenStudio, 2014
