+CamPro Quick Start Guide CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
+CamProQuick Start Guide Regulatory Notices for USA This equipment has been tested and found to comply with the limits for a digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
+CamPro Quick Start Guide Camera Mounting To mount the +Cam Pro to a wall, unscrew the base of the camera and remove the metal plate. With the included screws and anchors, fasten the mounting bracket on to the wall. Then, reattached the base cover and screw the stand back on to the mounting bracket.
+C CamProQuick Start Guide 1. iSecurity+ i + App To get g started, download d the iSec curity+ app from f Apple’s s App store or th he Google Pllay Store. 2. Connect C t Power to Connect the +Cam Proto the AC pow wer adapter, then t plug yo our power cord d into the ele ectrical outle et.
+CamPro Quick Start Guide 3a. Wi-Fi Setup Mode Please make sure the “Wi-Fi Setup” switch on the back of the camera is set to ON. The “Wi-Fi Setup” indicator will glow green when the +Cam Pro is ready for setup. (This may take up to 2 minutes when the camera is first powered on.
+CamProQuick Start Guide 3b. Connect to +CamPro iPhone Android Go to Settings -> (Wireless & Networks for Android) Wi-Fi on your device and connect to the +Cam Pro network (denoted by “+CAM-Pro” plus the last 4 digits of its CAM ID, which can be found on the back of the camera).
+Cam mPro Quick Start S Guide 4a.. Launch iSecurity y+ App Once your devic ce establishe es its conn nection to th he +Cam Pro o, (usually take es around 30 0 seconds) la aunch the iSec curity+ App. The iSecurity+ app a will auto omatically dete ect your cam mera. When prompted, p click k ‘Yes’ to setup your cam mera.
+C CamProQuick Start Guide 4b.. Setup Wizard W Follo ow the instru uctions in the Camera Setu upWizard to complete installation.
+CamPro Quick Start Guide 5. Using iSecurity+ Please enter your user name and password, created during the setup process, in the login window to access your +Cam Pro.
+CamProQuick Start Guide 6a.
+CamPro Quick Start Guide 6b.
+CamProQuick Start Guide Safety Information Do not point the camera directly at the sun, or else it will damage the image sensor. Keep the camera away from heat to avoid electric shock. Keep the camera away from rain and moisture. Do not attempt to open, dismantle, repair, or service the camera. Doing so may cause electric shock and other hazards. Any evidence of misuse, abuse, or tampering will void the Limited Warranty.
+CamPro Quick Start Guide Troubleshooting LED Status Indicators Wi-Fi Setup Green: Setup mode on Orange: Setup mode initializing Light Off: Setup mode off Network Green: Connected to iSecurity+ Flashing Green: Connected to the Internet Orange: Connected to local network Flashing Orange: Not connected to any network Power Green: 14 Power On
+CamProQuick Start Guide For More Information To get the latest camera driver updates or to learn more about Imogen Studio products, please visit: www.imogenstudio.com To get the latest software updates or to learn more about Seedonk, please visit: www.seedonk.
Revised Dec.