1
+Cam Quick Start Guide Regulatory Notices for USA This equipment has been tested and found to comply with the limits for a digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
+Cam Quick Start Guide Camera Mounting To mount the +Cam to a wall, unscrew the base of the camera and remove the metal plate. With the included screws and anchors, fasten the mounting bracket on to the wall. Then, reattach the base cover and screw the stand back on to the mounting bracket.
+Cam Quick Start Guide 1. There’s an App for That To get started, download the Seedonk app from Apple’s App store. 2. Connect the Camera Plug the +Cam in to AC power with the supplied adapter before continuing.
+Cam Quick Start Guide 3. Wi-Fi Setup Mode Please make sure the “Wi-Fi Setup” switch on the back of the camera is set to ON.
+Cam Quick Start Guide 3. Connect iPhone to +Cam Go to Settings -> Wi-Fi on your iPhone and connect to the +Cam wireless network.
+Cam Quick Start Guide 4. Launch Seedonk App Once your iPhone establishes its connection to the +Cam, (usually takes around 30 seconds) launch the Seedonk App. The Seedonk app will automatically detect your +Cam. When prompted, click ‘Yes’ to setup your camera.
+Cam Quick Start Guide 4. Setup Wizard Follow the instructions in the Camera Setup Wizard to complete installation.
+Cam Quick Start Guide 5. Using Seedonk Please enter your user name and password, created during the setup process, in the login window to access your +Cam.
+Cam Quick Start Guide 6a.
+Cam Quick Start Guide 6b.
+Cam Quick Start Guide Safety Information Do not point the camera directly at the sun, else it will damage the image sensor. Keep the camera away from heat to avoid electric shocks. To prevent the chance of overheating and ruining the camera, do not cover/obstruct the ventilation holes at the top of the unit. Keep the camera away from rain or moisture. Do not attempt to open, dismantle, repair, or service the camera. Doing so may cause electric shocks and other hazards.
+Cam Quick Start Guide For More Information To get the latest camera driver updates or to learn more about Imogen Studio products, please visit: www.imogenstudio.com To get software updates or to learn more about Seedonk, please visit: www.seedonk.
© ImogenStudio, 2012