Parts List

INSTRUCTIONS TO PROGRAM A REMOTE:

1. Locate the garage receiver and determine the location of the LEARN button on your

opener.

2. Push the learn button on the opener. Light will blink.

3. Press any button you wish to program on

4. Light on opener will stop blinking.

5. The remote is now programmed.

6. *Follow these same steps to program multiple openers to a multi-button remote.

7. Step away from all moving parts and doors and test the function.

△

WARNING

In order to prevent possible SERIOUS INUURY or DEATH from a moving gate or garage door

- keep remote controls out of the reach of children.

- Only use the remote control when the gate garage door can be seen deary, is property

adjusted, and there are no obstructions to door travel.

- Keep the gate garage door in sight until is completely closed.Do not allow anyone to cross

paths with the gate/garage door while moving or operating the remote control.

MC-803

PAGE 1
MC-803 INSTRUCTIONS TO PROGRAM A REMOTE: 1. Locate the garage receiver and determine the location of the LEARN button on your opener. 2. Push the learn button on the opener. Light will blink. 3. Press any button you wish to program on MC-803 4. Light on opener will stop blinking. 5. The remote is now programmed. 6. *Follow these same steps to program multiple openers to a multi-button remote. 7. Step away from all moving parts and doors and test the function.
PAGE 2
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.