QOMO Interactive Touch Screen User Manual V1.0 www.qomo.
Content Safety Instruction.......................................................................................................................................................... 1 Installation .................................................................................................................................................................... 3 Bearing .............................................................................................................................................
Safety Instruction For your safety, please read the following instruction before you use the product. Serious injury or property loss may be caused by improper operations. Do not try to repair the product without guidance. Placement Do not place the unit on an unstable cart, stand, tripod, racket, table, or shelf. Do not expose the unit to direct sunlight and other sources of heat. Do not handle liquids near or on the unit.
Normal operating temperature is 5 ~ 40℃. Humidity Do not expose machine in rain, damp or place near water. Ensure the indoor drying, cool. Ventilation Keep the ventilation openings clear. Ensure that the unit has enough space for ventilation around: left, right and back >10cm, top> 20cm. Earphone It will affect the hearing if you listen to noisy sound for a long time. Before using earphone, please turn down the volume in advance. CAUTION This is a Class A product.
Installation Bearing If the product is I nstalled in a wall-mounted way, the bearing capacity of the surface for installation must be at least four times of the weight of the product. If the surface for installation is a wall or the ceiling of a building, the surface must be made of solid bricks, concrete or other materials with equal intensity.
Attach the mounting arms to the Insert wall plugs into the mounting holes. back of screen with the screws. Push the self-tapping screws through the bracket into the wall plugs and tighten the screws. Note: The horizontal and vertical distance of mounting holes on the back of screen must be within the required distance of bracket. OPS Installation Note: The OPS does not support hot-plugging. Please insert the plug of the OPS after the interactive panel is disconnected from the power.
5
Basic Operation Power on Power the interactive touch screen with the 100V-240V 50Hz/60Hz AC power supply. Connect the panel to the power supply. Press the rocker switch (on the bottom left in the rear of the panel) to enter standby mode. The power indicator turns red. Press power button on the control panel or Power button on the remote control to turn on the display and built-in PC simultaneously. The power indicator turns green.
0 Item Icon 1 - 2 - 3 Function Description Brightness sensor: Auto adjust brightness according to the enviroment Power indicator: Press power button on the control panel. The power indicator turns green. Press power button on the control panel to enter the standby mode. The power indicator turns red. Android/PC USB port*2 auto switch （Do not switch the signal source if the usb flash drive is writing.
Panel Interface 8
Remote Control Item Function Description 9 1 Power on or standby mode 2 Mute on/off 3 Change channels or enter numbers 4 Return to previous interface 5 SLEEP: Set the sleep time NICAM: Nicam button ASPECT: Adjust picture aspect ratio 6 Signal source selection 7 Show the current signal source 8 Up/down/right/left direction buttons OK: Confirm 9 Show or hide menu 10 Quit the current interface 11 Increase/decrease volume `12 Change channel 13 P.
Remote Control Area 5M The effective receiving area is about 3 meters with 30° angle from vertical point to the left and right. And the effective receiving area is about 5 meters from the front of device. Note that the remote control signal receiver locates at the position of power indicator.
Connecting and Setting For safety, please do not connect any power supply before the external devices setup. 1. External Computer and Touch Connecting Audio IN VGA IN USB-Touch 1) Connect a VGA cable (15 pin) between the VGA and external PC. Connect an earphone cable between the PC and audio at the same time. 2) Connect a USB cable between the external PC and USB terminal. 3) Plug the POWER cord and switch it on from the rear panel. 4) Start up the external computer. 5) Press to turn on the panel.
2. AV Connecting HDMI IN 1) Connect a HDMI cable with the device with HDMI. 2) Plug the POWER cord and switch it on from the rear panel. 3) Press to turn on the panel. 4) Select Signal source to HDMI source according to the one you connected. 3. Video-OUT HDMI-out 1) Connect a HDMI cable with the device with HDMI. 2) Plug the POWER cord and switch it on from the rear panel. 3) Press to turn on the panel.
4. RS232 1) Connect a serial port cable with the device. 2) Plug the POWER cord and switch it on from the rear panel. 3) After connecting the central control system and unit, you can use some of the function such as power on/off or adjust the volume etc.
Sleep Mode 55 00 20 00 75 Sound Mode 55 00 22 00 77 Picture mode 55 00 28 00 7D Set Sleep Timer 55 00 4A 00 9F Aspect 55 00 4C 00 A1 Volume plus(+) 55 00 0C 00 61 Volume plus(-) 55 00 0E 00 63 Channel plus(+) 55 00 10 00 65 Channel plus(-) 55 00 12 00 67 Return 55 00 0A 00 5F Auto Scan 55 00 58 00 AD Switch to DTV 55 00 80 01 D6 Switch to ATV 55 00 80 02 D7 Switch to Scart 55 00 80 03 D8 Switch to YPBPR 55 00 80 04 D9 Switch to YPBPR 2 55 00 80 10 E5 Switch to VGA 1 55 00 80
Set Saturation Set HUE Set Sharpness Set Color Temp Set Reduction noise Set BASS Set Treble 55 00 2E 00 83 55 00 30 00 85 55 00 32 00 87 55 00 34 00 89 55 00 36 00 8B 55 00 3A 00 8F 55 00 3C 00 91 Set Balance Set Language(0,1,2,3,,,,) Enter factory Menu Factory Reset Burning Backlight mode Screen shot VGA auto adjust Home WhiteBoard 55 00 3E 00 93 55 00 42 00 97 55 00 82 00 D7 55 00 84 00 D9 55 00 86 00 DB 55 00 88 00 DD 55 00 8A 00 DF 55 00 8C 00 E1 55 00 91 00 E6 55 00 93 00 E8 Resolution switch Audio
Journey 14 goes with completely new Android Interface for customization and quick-access. Add frequently-used apps on the home screen Signal Source Preview and Signal Source Switch Long press corresponding App to delete it from home screen Click to unfold on-screen toolbar System Help Whiteboard: Click to enable whiteboard function Browser: Built-in browser Application: Click to access more applications interface.
The toolbar can be invoked in any signal source interface. Swipe up from the bottom of screen and it will appear. Buttons Functions Return to previous interface Return to Android home page Switch or end the running programs Change signal source channel Click to enter Menu Quick to annotate Slide to increase or decrease the volume Slide to increase or decrease the brightness Signal Source Selection There are three ways to select a signal source to display.
Press SOURCE button on the remote control. Press button on the front control panel. Green light indicates there’s a signal and grey indicates no signal. Signal Source Interface Select a source and press OK or click the channel icon directly to enter it.
Android Settings Common Setting Click setting icon on toolbar to enter Android setting interface. Common function: Click Common function to set Sound, Brightness, Eye Protection, Startup and Shutdown, Screen Lock setting，Multi-user, Wake On Lan (WOL), HDMI output format, Wallpaper and Screen Saver. Sound: Slide right or left to increase or decrease the volume. Brightness: Slide to adjust the brightness. Eye Protection: Enable eye protection function.
and return to the previous status when your finger removes from the screen for 3s. Startup and Shutdown: Click Screen Lock Setting: Set the time to lock screen automatically and password to unlock the screen. HDMI output format: set HDMI output to be 1920*1080 or 3840 * 2160. Wallpaper: Set dynamic or static wallpaper. Screen Saver: Set screen saver. to set on/off time. Multi-user Account Setting: Journey 14 provides Multi-user Account Switch functions.
Application Setting Application: Select corresponding apps to uninstall it. Note that you can’t uninstall apps burnt-into the firmware. Storage Setting Click Storage to check internal storage and USB storage. Click eject icon drive. Date Setting Date: Where you can change time format, time zone and etc.
Language Setting Language: Where you can change the system or keyboard language. Factory Reset Reset: Erase all information and downloaded apps. You can’t recover it. About Device About Device: Where you can check Android Firmware Version “Build number”.
Built-in PC Operation 1. Select PC signal source to enter PC interface. The following are three ways to select a signal source channel. Swipe your finger up from the bottom edge to bring up a toolbar then click input. Press SOURCE button on the remote control. Press button on the front control panel. In the signal source page, select a channel and press OK or click the channel icon directly to enter it. 2. Operate the built-in PC in the same way as you operate an ordinary computer. 3.
Menu Click menu icon on the bottom-up toolbar. Menu pops up as follows. icon does not appear under Android signal source. Under menu, you can set image, sound and etc. Here provides some for quick-access.
Whiteboard Annotation Whiteboard is an annotation software preinstalled in the Journey panels. It features high speed annotation without any delay.
0 Included Accessories Picture Name Quantity Remote control *1 Magnetic Pen *2 Pointer *1 Power cable *1 HDMI cable *1 USB cable (A-B) *1 Bracket *1 WIFI Antenna *4 Warranty card *1 CD *1 26
Troubleshooting Remote Control Remote control out of order Check whether there is object between remote control and panel receiver; Check whether the battery is installed correctly; Check whether the battery is drained. Touch Touch does not response. Make sure infrared frames have not been obscured. Check whether you enable freeze function on remote control. Built-in PC OPS shut down automatically.
20C 25
