User's Manual

ManualsBrandsQolsys ManualsElectronicsis a wireless motion sensor to be used in the Qolsys IQ home security system.

IQ MOTION- INSTALLATION MANUAL

QOLSYS CONFIDENTIAL AND PROPRIETARY PAGE 1 OF 6

The Qolsys IQ Motion is a high-performance wireless motion

sensor that uses advanced power circuit technology to extend

battery life. The tamper-resistant casing along with an

electronic sensor discourages physical tampering and the

sensor is equipped with a pet immunity feature that prevents

accidental triggers by household pets. The IQ Motion works

seamlessly with the Qolsys IQ Panel.

•

Advanced circuit technology resulting in ultra-low power

consumption

•

Tamper

detection/reporting

•

Rigid wall mounting for discreet placement

•

Pet immunity

•

Easy to install batteries

•

Supervisory health messaging

•

Sensor Motion detection

•

Transmits 2 signals per 5 minute period

PIR (Passive Infrared) Motion Sensors

2 Mounting screws

2 AAA Alkaline batteries

PRODUCT FEATURESPARTS INCLUDED

IQ MOTION

•

Wireless signal range: 600 ft (200 m), open air

•

Code outputs: paring, tamper, tamper restore, alarm detect

motion, alarm restore, supervisory, low battery

•

Transmitter frequency: 319.5MHZ +-15KHz

•

Transmitter bandwidth: 24KHZ

•

Modulation type: ASK-OOK

•

RF output power!91.1dBuV +/- 5% at 3m

•

Sensor Range 30 ft (9.1 m) x 50 ft (15.2 m)

•

Maximum Horizontal Sensing Angle 80°

TECHNICAL SPECIFICATIONS

Summary of content (6 pages)

PAGE 1
IQ MOTION- INSTALLATION MANUAL IQ MOTION The Qolsys IQ Motion is a high-performance wireless motion sensor that uses advanced power circuit technology to extend battery life. The tamper-resistant casing along with an electronic sensor discourages physical tampering and the sensor is equipped with a pet immunity feature that prevents accidental triggers by household pets. The IQ Motion works seamlessly with the Qolsys IQ Panel.
PAGE 2
IQ MOTION- INSTALLATION MANUAL GUIDELINES •IQMotionSensor is designed for indoor use and is compatible with homes where pets up to 40 lbs (18 kg) are present. To minimize the possibility of false alarms the following guidelines should be followed: •The sensor may be mounted in a corner or on a flat wall that is free of vibrations. •If possible, mount the sensor within 100 ft (30.5 m) of the panel.
PAGE 3
IQ MOTION- INSTALLATION MANUAL MOUNTING INSTRUCTIONS Remove back cover by pressing bottom button and sliding back cover off in an upward motion. If a flush mount is required screw in the back cover on the wall using the screw templates as shown. If corner mount is required use the screw templates as shown. MOUNTING FOR PET SENSITIVITY Mount the sensor 6.5 to 7 ft (0.9 and 1.5 m) high. For best results, install the sensor higher than the highest point the pet might reach in the detection area.
PAGE 4
IQ MOTION- INSTALLATION MANUAL PROGRAMMING THE IQ DOOR/WINDOW The following steps describe general guidelines for programming (learning) the sensor into the IQ Panel. Refer to the IQ Panel's installation instructions for complete programming details. 1 From the home screen of the IQ panel, touch the “Settings” icon 2 Enter the installer passcode.
PAGE 5
IQ MOTION- INSTALLATION MANUAL BATTERY REPLACEMENT To replace batteries: •Push button on side of sensor and lift off cover. •Remove old batteries and replace with new ones. •Close cover by snapping the cover back onto the sensor. BATTERY TYPE AAA Alkaline (2 per sensor) Battery life expectancy: 3 years. (Lifetime may vary depending on number of activations, environmental conditions, etc.
PAGE 6
IQ DOOR/WINDOW- INSTALLATION MANUAL IMPORTANT INFORMATION 15.21 § 15.21 Information to user. The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.