Technical Specs

Qolsys Zigbee Radio Card

General Applications:

The Qolsys Zigbee Radio Card features the Silabs MGM13P02HGA, which is a multiple protocol supported

chip. The Qolssys Zigbee Radio Card uses the Zigbee protocol on theMGM13P02HGA module to interface

to Smart Energy Devices

Installation and Operation:

It is recommended to secure the module to a large ground plane using the mounting hole and header pins. Do

not place any large pieces of metal around or near the antenna, as it will inhibit performance.

The Qolsys Zigbee Card operates around 2.4GHz with an output power up to +10dBm. Data and protocol

specifications are beyond the scope of this document. Please contact Qolsys for the technical specifications.

FCC Compliance:

FCCID: 2AAJXQS-ZB

This equipment complies with radiation exposure limits set forth for uncontrolled environment. The

antenna(s) used for this transmitter must be installed to provide a separation of at least 20cm from all persons

and must not be collocated or operating in conjunction with any other antenna or transmitter.

PAGE 1
Qolsys Zigbee Radio Card General Applications: The Qolsys Zigbee Radio Card features the Silabs MGM13P02HGA, which is a multiple protocol supported chip. The Qolssys Zigbee Radio Card uses the Zigbee protocol on theMGM13P02HGA module to interface to Smart Energy Devices Installation and Operation: It is recommended to secure the module to a large ground plane using the mounting hole and header pins. Do not place any large pieces of metal around or near the antenna, as it will inhibit performance.
PAGE 2
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.