User's Manual

Qolsys Image Sensor Module

General Applications:

The Qolsys Image Sensor Module features the ATXMEGA123D3 microcontroller and AT86RF212

transceiver, providing Zigbee air interface to, and compatibility with Alarm.com’s 900 MHz Image

Sensors. OEMs that integrate this module will gain control to the image sensor, allowing rule-based

monitoring and camera peak-ins.

Installation and Operation:

It is recommended to secure the module to a large ground plane using the mounting hole and header

pins. Do not place any large pieces of metal around or near the antenna, as it will inhibit performance.

PAGE 1
Qolsys Image Sensor Module General Applications: The Qolsys Image Sensor Module features the ATXMEGA123D3 microcontroller and AT86RF212 transceiver, providing Zigbee air interface to, and compatibility with Alarm.com’s 900 MHz Image Sensors. OEMs that integrate this module will gain control to the image sensor, allowing rule-based monitoring and camera peak-ins. Installation and Operation: It is recommended to secure the module to a large ground plane using the mounting hole and header pins.
PAGE 2
The Qolsys Image Sensor Module operates around 915 MHz with an output power up to +10dBm. Data and protocol specifications are beyond the scope of this document. Please contact Qolsys for the technical specifications. FCC Compliance: FCCID: 2AAJXQS-IS This equipment complies with radiation exposure limits set forth for uncontrolled environment.
PAGE 3
CAN ICES-3 (B)/NMB-3(B) Warranty Information: IMPORTANT! Changes or modifications not expressly approved by Qolsys Inc. could void the user’s authority to operate the equipment, as well as warranty for the product.