Integration Instruction

ManualsBrandsQolsys ManualsElectronicsImage Sensor Module

Detailed Module Integration Details

FCCID: 2AAJXQS-IS

Regulatory Module Integration Instructions

This module has been granted modular approval for mobile applications. OEM integrators for host

products may use the module in their final products without additional FCC / IC (Industry Canada)

certification if they meet the following conditions. Otherwise, additional FCC / IC approvals must be

obtained.

• The host product with the module installed must be evaluated for simultaneous transmission

requirements.

• The user’s manual for the host product must clearly indicate the operating requirements and

conditions that must be observed to ensure compliance with current FCC / IC RF exposure

guidelines.

• To comply with FCC / IC regulations limiting both maximum RF output power and human

exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only

exposure condition must not exceed 2dBi

• A label must be affixed to the outside of the host product with the following statements:

This device contains FCCID: 2AAJXQS-IS

This equipment contains equipment certified under IC: 11205A-QSIS

The final host / module combination may also need to be evaluated against the FCC Part 15B criteria for

unintentional radiators in order to be properly authorized for operation as a Part 15 digital device.

If the final host / module combination is intended for use as a portable device (see classifications below)

the host manufacturer is responsible for separate approvals for the SAR requirements from FCC Part

2.1093 and RSS-102.

Summary of content (4 pages)

PAGE 1
Detailed Module Integration Details FCCID: 2AAJXQS-IS Regulatory Module Integration Instructions This module has been granted modular approval for mobile applications. OEM integrators for host products may use the module in their final products without additional FCC / IC (Industry Canada) certification if they meet the following conditions. Otherwise, additional FCC / IC approvals must be obtained. • The host product with the module installed must be evaluated for simultaneous transmission requirements.
PAGE 2
Device Classifications Since host devices vary widely with design features and configurations module integrators shall follow the guidelines below regarding device classification and simultaneous transmission, and seek guidance from their preferred regulatory test lab to determine how regulatory guidelines will impact the device compliance. Proactive management of the regulatory process will minimize unexpected schedule delays and costs due to unplanned testing activities.
PAGE 3
Simultaneous Transmission Evaluation This module has not been evaluated or approved for simultaneous transmission as it is impossible to determine the exact multi-transmission scenario that a host manufacturer may choose. Any simultaneous transmission condition established through module integration into a host product must be evaluated per the requirements in KDB447498D01(8) and KDB616217D01,D03 (for laptop, notebook, netbook, and tablet applications).
PAGE 4
OEM Instruction Manual Content Consistent with §2.909(a), the following text must be included within the user’s manual or operator instruction guide for the final commercial product. Operating Requirements and Conditions: The design of ZWave Module complies with U.S. Federal Communications Commission (FCC) guidelines respecting safety levels of radio frequency (RF) exposure for Mobile devices.