User Manual

Table Of Contents

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598

Certification Exhibit

FCC ID: X6P-QSYNC433AM

IC: 8832A-QSYNC433AM

FCC Rule Part: 15.231

IC Radio Standards Specification: RSS-210

ACS Project Number: 12-0527

Manufacturer: HomeRun Holdings

Model: QSYNC-433AM

Manual

PAGE 1
Certification Exhibit FCC ID: X6P-QSYNC433AM IC: 8832A-QSYNC433AM FCC Rule Part: 15.231 IC Radio Standards Specification: RSS-210 ACS Project Number: 12-0527 Manufacturer: HomeRun Holdings Model: QSYNC-433AM Manual 5015 B.U.
PAGE 2
sync Network Gateway for Qmotion Automated Shades www.qmotionshades.com 1 2 Verify the contents of the Qsync package and gather needed materials: 1. Ethernet cable. 2. Qsync 3. Antenna 4. Power Adapter (Color may vary.) 4 3 Coax Connector Attach the antenna to the Qsync by screwing it onto the coaxial connector on Qsync’s back plate. For best performance, position the antenna as high up as possible and without obstructions between it and the shades. Plug the power cord into Qsync’s front plate.
PAGE 3
NO OK OK OK OK Connect Qsync to one of your router’s LAN ports using an ethernet cable. Do not use the Internet Port (shown yellow.) Internet Cable, not for Qsync Back of Router Open the App Store on your Apple device and search for “qmotion”. Download the Qsync app by clicking on the “FREE” button. The app will download. Click the “INSTALL NOW” button to finish installation. Open the app on your device. The app searches the WiFi network connected to your device for Qsync.