User's Manual

Step 1
Open the coordinator hub for joining or pairing the
remote and the shade.
- If you already have a coordinator/
router check manufacturers instruction on
how to place into pairing mode
- If using QMotion Router push
pairing button on side and let go
Step 2
Slightly tug the shade 6” to wake shade up. The
shade will try to join the network by moving up and
down (jogging). Will be in learn mode for 2 minutes.
Step 3
Press any button on the remote to join the network.
Step 4
Shade is now connected to network. LED on
remote will ash letting you know if connected.
Step 5
Learn shade to remote. Hit “MODE SELECT”
button on the back of remote. Then you will hit “UP”
button. Shade will then move to 75% position.
Step 6
Tug the shade 6” and let go. Shade is now learned
to the remote.
Step 7
To learn bottom limit, hold “DOWN” button for ve
seconds. Shade will jog.
Step 8
Tug shade to enter learn mode.
Step 9
Pull shade to desired bottom limit.
Step 10
Hold “DOWN” button for ve seconds to store posi-
tion. Shade will jog to conrm learned bottom limit.
Step 11
Hit “DOWN” button to conrm bottom limit.
Step 12
Hit “UP” button to open shade. Shade will travel to
full open position. You now have bottom limit and
intermediate positions learned.
NETWORK SETUP AND
INSTALLATION INSTRUCTIONS
UNIVERSAL REMOTE (MODEL #QZR-ZIG2400),
CRYSTAL CONNECT (MODEL #QMRS-240Z),
& QMotion Router (MODEL # 150404Z)
Channel Button
Variable
Position
Butttons
Channel/Mode
Reverse Side
Mode Select Button
Pairing the remote
to the QMotion
Router allows for
communications
to your shades
Universal
Remote
QMotion Router
Crystal Connect
Roller Shade
Up/Down
Buttons
IMPORTANT
Read and understand all instructions before installing.
Always wear personal protection equipment including
safety glasses and gloves. Use a ladder per its
manufacturer’s instructions. Work safely!