Land mobile radio User manual Brand name:AnyTone Model name˖588 FCC ID:T4K588
588
Nice Housing, Stoutness & Stability, Advanced and Reliable functions, Perfect & Valuable. Approval. 588 mobile radio especially designs for drivers and it pursues company philosophy of innovation and practicality. :KHQ SURJUDPPLQJ WKH WUDQVFHLYHU UHDG WKH IDFWRU\ LQLWLDO GDWD ¿UVWO\ WKHQ UHZULWH WKH IUHTXHQF\ DQG VLJQDOLQJ HWF NOTE RWKHUZLVH HUURUV PD\ RFFXU EHFDXVH RI GLIIHUHQW IUHTXHQF\ EDQG HWF 588 Mobile Radio Applicable Software: QPS588 Models Apply To This Manual: 588 Mobile radio
Thank you for choosing this vehicle transceiver, 588 always provides high quality products, And this transceiver is no exception. As you learn how to use this transceiver, you will find that 588 is pursuing "user friendliness". For example, each time you change the menu no. in Menu mode, you will see a text message on the display that lets you know ZKDW \RX DUH FRQ¿JXULQJ Though friendly design for user, this transceiver is technically complicated and some features may be new to you.
CONTENTS 1HZ DQG ,QQRYDWLYH )HDWXUHV ..............................................1 Transmitting Optional Signaling ...................................................... 13 Supplied Accessories/Optional Accessories.....................2 Channel Edit .................................................................................... 13 Supplied Accessories....................................................................... 2 Channel Delete ..........................................................
CONTENTS Power .................................................... 20 Optional Signaling ........................................................................... 27 TX OFF Setup.................................................................................. 20 Scan Skip ........................................................................................ 28 Busy Channel Lockout ..................................................................... 21 Frequency/Channel Scan ....................
New and Innovative Features 1 588 Mobile Radio has nice housing, stoutness & stability, advanced and reliable functions, perfect & valuable. This amateur mobile radio especially designs for drivers and it pursues company philosophy of innovation and practicality. More functions as follows: Display on a large LCD with adjustable brightness, convenient for nighttime use. There are Amateur operation mode and Professional operation mode for option. Distribute buttons reasonably, convenient for operation.
2 Supplied Accessories/Optional Accessories Supplied Accessories After carefully unpacking the transceiver, identify the items listed in the table below. We suggest you keep the box and packaging. Transceiver Microphone (QHM-03) (with DTMF keyboard) Spare Fuses (one pair) [QF-01] Mobile Mounting Bracket (QMB-01) DC Power Cable with Fuse Holder(QPL-01) Hardware Kit for Bracket Black screws Tapping screws )M4X8mm* )M5X8mm* 5QDT)RTT.12B* 5QDT)RTT.
Initial Installation Mobile installation To install the transceiver, select a safe, convenient location inside your vehicle that minimizes danger to your passengers and yourself while the vehicle is in motion. Consider installing the unit at an appropriate position so that knees or legs will not strike it during sudden braking of your vehicle. Try to pick a well ventilated location that is shielded from direct sunlight.
3 Initial Installation DC Power Cable Connection Red Locate the power input connector as close to the transceiver as possible. Mobile Operation The vehicle battery must have a nominal rating of 12V. Never connect the transceiver to a 24V battery. Be sure to use a 12V vehicle battery that has sufficient current capacity. If the current to the transceiver is insufficient, the display may darken during transmission, or transmitting output power may drop excessively. 1.
Initial Installation To turn on the unit, press the power switch manually while it is illuminated. (While ignition key is at ACC or ON position) 8. When the ignition key is turned to ACC or ON position with the radio's power switch on, the unit turns on automatically and the power switch will be lit. Turn the ignition key to OFF position or manually turn the power switch off to shut down the radio. 9. Using extra cable,power consumption:5MAH.
3 Initial Installation REPLACING FUSES If the fuse blows, determine the cause, then correct the problem. After the problem is resolved, replace the fuse. If newly installed fuses continue to blow, disconnect the power cable and contact your authorized dealer or an authorized servi-cecenter for assistance. ,PSRUWDQW The range of displayed voltage is only from 7V to16V DC, because the displayed value is estimated, please use a voltmeter when a more precise reading is desired.
Initial Installation Accessories Connections External Speaker If you plan to use an external speaker, choose a speaker with an LPSHGDQFH RI ȍ 7KH H[WHUQDO VSHDNHU MDFN DFFHSWV D PP mono (2-conductor) plug. 3 Microphone For voice communications, connect a microphone equipped with an 8-pin modular plug into the modular socket on the front of the PDLQ XQLW 3UHVV ¿UPO\ RQ WKH SOXJ XQWLO WKH ORFNLQJ WDE FOLFNV $WWDFK the supplied microphone hanger in an appropriate location using the screws in
4 Getting Acquainted Front panel Press key. key until NO. KEY Main Dial FUN/SET V/M/MW MHz/SHIFT TS/DCS/LOCK CAL/H/L SQL/D Data Terminal TX Mic.connector )81&7,21 FUN/SET &RQ¿UPV WKH VHOHFWLYH IXQFWLRQV DQG H[LW V/M/MW MHz/SHIFT TS/DCS/LOCK Stores data into channels Sets offset direction and offset frequency Sets Keypad lock function CAL/ H/L SQL/D Compander mode on/off Press NH\ DQG IROORZLQJ NH\ WRJHWKHU WR DFWLYDWH IROORZLQJ IXQFWLRQ
Getting Acquainted Rear panel 1 3 )81&7,21 Terminal for connecting optional cable QCC01 for Ext. Power use with ignition key On/Off function. The radio will auto power on when car is driving. Jack The radio will auto power off when car stops. Ext.Speaker Terminal for optional external speaker SP01 Terminal Antenna &RQQHFWLRQ IRU ȍ FRD[LDO FDEOH DQG DQWHQQD Connector NO. KEY DISPLAY 19 18 17 16 15 13 14 13 12 10 11 9 1 8 2 3 M )81&7,21 Squelch level. In channel mode.
4 Getting Acquainted microphone MIC Connector Diagram(in the front view of connector) ,FZ 1BE 4FSJBM %BUB 7 %08/ 61 .*$ (/% .*$ 155 (/% NO. KEY )81&7,21 UP Increase frequency ,channel number or setting value. DOWN Decrease frequency, channel number or setting value. PTT Press the PTT (Push-TO-Talk) key to transmit. Number Key Input VFO frequency or DTMF dial out etc.. DTMF ON/ Switches between DTMF dialing or function operating.
WORKING MODE (AMATEUR TRANSCEIVER OR PROFESSIONAL TRANSCEIVER) According to practical application,you can set the radio works as Amateur Transceiver mode or Professional Transceiver mode . There are also 2 levels operation menu to set functions as you need. It is easy and convenient (From No.1 to No. 15 are channel function setup,From No.15 to No.29 are general setting setup). 1. 8PSLJOH .
6 Basic Operations Switching The Power On/Off PWR KEY according to the option selected during installation Press the switch or turn the ignition key to ACC (speed up) or ON (startup) position to power on radio . Press the key for 1s or turn the ignition key to OFF position to turn off. Min Max Volume Volume frequency in screen will be auto-hidden. In this status, turn selector knob or Microphone [ / ] key will increase or decrease frequency quickly by 1MHz step . 2.
Basic Operations Please hold the microphone approximately 2.5-5.0cm from your lips, and then speak into the microphone in your normal speaking voice to get best timbre. Press and hold [PTT] key, LED lights RED and power intensity showed in screen indicates it is transmitting, release to receive. Transmitting Tone-Pulse Press and hold [PTT] key, then press Microphone [ 6 Channel Delete 1. Under channel mode, turn selector knob to select channel which you want to delete. 2.
7 Shortcut Operations 2. Turn selector knob or press Microphone [ squelch off/squelch off momeNTARY key programmed as Squelch Off or Squelch Off Momentary to monitor the weak signal. 1. Squelch Off: Press key to disable squelch ,press key again to resume squelch. 2. Squelch Off Momentary: Press and hold squelch,release key to disable key to resume squelch. The above functions should be set in programme software. Squelch level Setup 2.
Shortcut Operations iron, it means current channe can be set 3. When LCD appears with DCS encode and decode together, turn selector knob or press / ] to select desired DCS encode and Microphone's [ decode. 4. CTCSS:62.5-254.1, Total 51groups; DCS:000N-777I total 1024 groups. N is positive code, , is inverse code. 5. Press any key except , and keys to return into 7 Power Press key until LCD display iron, then press key to switch be low power.
7 Shortcut Operations Offset Direction and offset frequency setup Repeater receives a signal(UP-LINK) on one frequency and retransmits on another frequency(DOWN-LINK). The difference between these two frequencies is called the offset frequency. If the UP-LINK frequency higher than DOWN-LINK frequency, the direction is positive, If it is lower, the shift direction is negative. key until the icon displays on the LCD, then press key, LCD displays offset direction and offset frequency. key to select 2.
Shortcut Operations 7 2. Turn selector knob to choose group you desired. Total:16 group,01-16. 3. Press key to enter into editing of current group,press MIC's numeric keys to set your desired data. 4. The display scrolls when the 7th digit is entered. The numbers 0-9, --, A-D, * and # can be stored up to a total of 23 digits. 5. After editing,press PTT or edited DTMF signaling. Press key to send current group and store to exit and store. Transmitting Edited DTMF tones in the Auto-dialer memory 1.
8 General Setting 1. Press and hold key for over 2s to enter general setting menu. 2. Press to select the desired function option. or 3. Turn selector knob to select the desired setup. WR FRQ¿UP DQG H[LW 4. Press Meanwhile,if you want to edit channel name or start up menu,press or to move forward or backward,Press to store and exit. In Profession transceiver mode,the functions from No.1 to No.17 will be auto-hidden. Frequency Channel Step Setup Only in frequency (VFO) mode, this function is valid.
General Setting Press directly to transmit the pre-stored 5-Tone signaling. for 2s until LCD displays In 5Tone signaling mode,press "AN---",turn selector knob to select desired digit(caller ID).In WR FRQ¿UP H[LVW GLJLW DQG PRYH FXUVRU WR this mode,press to forward cursor.After editing,press key to next,press operate ANI call. 4. Press NH\ WR FRQ¿UP DQG H[LW Sending 2-Tone Call 1. Press and hold key for over 2s to enter general setting menu. 2. P r e s s / key to choose No.
8 General Setting 1. Press and hold key for over 2s to enter general setting menu. 2. Press / key to choose No.06 menu, LCD displays "SPK--SQ". 3. Turn selector knob to select the desired combination If select "SQ",it indicates you can hear the calling from caller when receive a matching carrier. If LCD displays "CTC",it indicates you can hear the calling from caller when receive a matching carrier and CTCSS/DCS signaling .
General Setting Busy Channel Lockout BCLO is to disable transmitting while RX signal is received. Once the channel is busy and you press PTT, the radio will beep as warning and get back to receiving. 1. Press and hold key for over 2s to enter general setting menu 2. Press / key to choose No.10 menu, LCD displays"LOCK--OFF". 3. Turn selector knob to select the desired setting. 8 Editing Channel NAME 1. Press and hold key for over 2s to enter general setting menu. 2. Press / key to choose No.
8 General Setting Scrambler setup (Encryption) Talk Around By Talk Around function,you can directly communicate with other radios in your group in case the repeater is not activated or when you are out of the repeater range. The transceiver will transmit by RX frequency with its CTCSS/DCS signaling. 1. Press and hold key for over 2s to enter general setting menu. 2. Press / key to choose No.13 menu, LCD displays "TALK—OF". 3. Turn selector knob to select the desired setting.
General Setting Radio's 5TONE SELF ID ENQUIRY 1. Press and hold key for over 2s to enter general setting menu. 2. Press / key to choose No.17 menu, LCD displays"F--XXXXX", "XXXXX" is radio's 5TONE SELF ID. NH\ WR FRQ¿UP DQG H[LW 3. Press Voice Prompt The prompting tone provides confirmation of entry, error status or malfunctions of the transceiver. You can enable or disable this function. 1. Press and hold key for over 2s to enter general setting menu.
8 General Setting 1HOUR:Auto power off after 1h 2HOUR:Auto power off after 2h OFF:Disable Auto power off 4. Press NH\ WR FRQ¿UP DQG H[LW 'HIDXOW 2)) DTMF Transmitting Time 1. Press and hold key for over 2s to enter general setting. 2. Press / key to choose No.21 menu, LCD displays"SPD--50". 3. Turn selector knob to select the desired setting. 30/50/100/200/300/500, which indicates the time for sending each DTMF signal & the interval between each DTMF being sent. 4. Press NH\ WR FRQ¿UP DQG H[LW '
General Setting menu, LCD displays"LAMP--25" 3. Turn selector knob to select the desired LCD backlight brightness 1-32 total 32 level backlight brightness. NH\ WR FRQ¿UP DQG H[LW 'HIDXOW 4. Press This function uses to start repeater .It needs a certain intensity Pilot Frequency to start dormant repeater.As usual,no need to send pilot frequency again once repeater started. 1. Press and hold key for over 2s to enter general setting. 2. Press / key to choose No.25 menu, LCD displays"TB--1750". 3.
8 General Setting Address list 1. Press and hold You store desired ID and corresponding ID name in address list.The LCD displays ID corresponding name if radio received ANI calling and ¿QG PDWFKLQJ ,' LQ DGGUHVV OLVW 1. Press and hold key for over 2s to enter general setting menu. 2. Press / key to choose No.28 menu, LCD displays"BOOK". 3. P r e s s to enter into ID setting,press / to select the desired group (00-127,total is 128 group ID).
Microphone Operation UP DOWN 9 Switches between VFO and channel mode In standby,press key to switch between channel mode and Frequency mode (VFO). Short Calling PTT Numeric Keys Lock DTMF ON/OFF Speaker You can operate the transceiver by keypad or input desired frequency or channel through the QHM-03 microphone (Note:In professional transceiver mode,other keys are invalid except PTT,[ / ], and ).
9 Microphone Operation When first bit of Exa byte in frequency displays "F",it indicates 5Tone function enable. This function can be temporarily used in channel mode. Once the radio is turned off or switched to another channel, the temporary setting will be erased and back to initial settings. Scan Skip BU: Enable BCLO, Carrier lockout, transmitting is inhibited when current channel receives a matching carrier;press [PTT] to emit error voice prompt.
Microphone Operation Talk Around TOT (Time-out timer) The time-out timer limits the amount of transmitting time. When you reach the time limit which has been programmed by your dealer, your transmission will be cut off. In order to transmit again, you must release PTT button to reset the timer. 1. In standby,press 2. Press [ / ,then press “LCD displays "TOT-X". ] to select the desired value. 3. 3UHVV QXPEHU NH\ WR FRQ¿UP DQG H[LW CTCSS/DCS Encode and Decode 1.
10 Long-distance Anti-theft Alarm This function is mainly use for simple anti-theft alarm device in vehicles. When the transceiver be removed in an improper manner,the transceiver will emit and transmit alarming and background voice to system and other transceiver of the same frequency. DC power cable Alarm cable [QL-01(A)] Battery Steering-wheel etc. Alarm cable [QL-01(B)] Connect DC power cable with car battery. 1.
Cable Clone 11 This feature will copy the programmed data and parameters in the master unit to slave units. It copies the parameters and memory program settings. 1. Use optional CP50 cloning cable, connect the cable between the data jacks on both master and slave. 2. Press and hold key, then press key to enter into cloning mode, LCD displays "CLONE". Master/Slave stereo plug,3.5mm plug GND DATA TX/RX 31 3.
12 Maintenance Default Setting after Resetting(VHF) Trouble Shooting 588 DCS encode and decode . VFO frequency 145.00MHz DCS code 023N Memory channel 1.2::! . Output power HI Offset direction .!!!!!!!!!!!!!! Key-lock setting OFF Offset frequency 600KHz TOT OFF Channel step 12.5KHz APO OFF CTCSS encode and decode .!!!!!!!!!!!!! Squelch Level 4 CTCSS frequency 88.5Hz Problem Possible Causes and Potential Solutions D Power is on, nothing appears on Display.
Specifications 5HFHLYHU (76, (1 VWDQGDUG WHVWLQJ General Frequency Range Narrow band VHF: 136-174MHz Number of Channels 200 channels Channel Spacing 12.5K (Narrow band) Phase-locked Step 12.5KHz Operating Voltage 13.8V DC ±15% Squelch Carrier/CTCSS/DCS/5Tone/2Tone/DTMF Frequency Stability ±2.5ppm Operating Temperature -20ą~+60ą Dimensions(WxHxD) 145 (W) x 47 (H) x 190 (L)mm Weight about 1.
14 Attached Chart 50 groups CTCSS Tone Frequency(Hz) 67.0 79.7 94.8 110.9 131.8 156.7 171.3 186.2 203.5 229.1 69.3 82.5 97.4 114.8 136.5 159.8 173.8 189.9 206.5 233.6 71.9 85.4 100.0 118.8 141.3 162.2 177.3 192.8 210.7 241.8 74.4 88.5 103.5 123.0 146.2 165.5 179.9 196.6 218.1 250.3 77.0 91.5 107.2 127.3 151.4 167.9 183.5 199.5 225.7 254.1 34 1024 groups DCS Code.
Attached Chart
SAFETYTRAINING INFORMATION Your Qixiang Electron Science & Technology Co., Ltd radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Occupational Use Only”, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the “General Population” in an uncontrolled environment.