TWO WAY RADIO Model name:3208plus Frequency:400-480MHz FCC ID:T4K3208PLUS
The transceiver will provide you with reliable, clear and efficient communication service.
SAFETY INFORMATION FOR USER the transceiver is excellently designed with advanced technology. Please observe the following precautions to perform your obligation, prevent personal injury and ensure the safety of transceiver usage. 1. Keep the transceiver and accessories away from children. 2. Please do not try to open or modify the transceiver without permission, non-professionals process may also cause damage. 3. Please use assorted battery and charger to avoid damage. 4.
CONTENTS UNPACKING .........................................................................................................................................1 Supplied Accessories .........................................................................................................................1 STANDARD ACCESSORIES/OPTIONAL ACCESSORIES ................................................................. 2 Standard Accessories ...............................................................................
CONTENTS Transmitting ...............................................................................................................................................................13 Power Switch .............................................................................................................................................................13 ON/OFF VOX ................................................................................................................................................
UNPACKING Carefully unpack the transceiver. We recommend you to identify the items listed in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, please contact dealers immediately.
STANDARD ACCESSORIES/OPTIONAL ACCESSORIES Standard Accessories Antenna*1 QA01U (400-480MHz) Instruction Manual 2 Professional FM Transceiver Li-ion Battery Pack QB-40L Charger QBC-40L AC Adaptor QPS-07 Belt Clip BC09
BATTERY INFORMATION How to Charge 1. Plug the AC adaptor into the AC outlet, and then plug the cable of the AC adaptor into the DC jack located on the back of the Charger. The Backlight lights orange (1s) and then goes out, lights green----waits to charge. 2. Plug the battery or transceiver into the charger. Make sure that the battery terminals are in contact with charging terminals well. The Backlight turns into twinkling red-----Pre-charging begins. 3.
PREPARATION Installing / Removing the Battery ■ Installing the Battery 1. Lay the battery to face the back of the radio. 2. Press the button of battery , the latch in button of transceiver locks will release . After hearing a "click" sounds ,the battery has been locked. ■ Removing the Battery According to “ ” to push the battery lock to removing the battery.
PREPARATION Installing / Removing the Antenna ■ Installing the Antenna: Screw the antenna into the connector on the top of the transceiver by holding the antenna at its base and turning it clockwise until secure. ■ Removing the Antenna: Turn the antenna anticlockwise to remove it. Installing / Removing the Belt Clip ■ Installing the Belt Clip: Place the belt clip to the grooves on the back of the transceiver, and then clockwise screw it.
PREPARATION Installing the Additional Speaker/ Microphone (Optional) Unveil the MIC-SP jack cover and then insert the Speaker/Microphone plug into MIC-SP jack. Note: The transceiver is not completely waterproof while using the Speaker/Microphone.
GETTING ACQUAINTED 1 7 2 3 4 5 6 8 9 10 Professional FM Transceiver 7
GETTING ACQUAINTED 1 2 3 4 5 6 Indicator light PTT Key When you are making a call, please press and hold this key to speak into the microphone. Release the key to receive. PF1 Key It can realize different functions by programming. PF2 Key It can realize different functions by programming. 7 Channel Selector Knob Turn the selector knob to select desired channel. Turn clockwise to increase channel, anticlockwise to decrease channel.
GETTING ACQUAINTED Indicator Status and Beep Warning on low voltage The red light twinkles. Transmitting Lighten the red light. Receiving Lighten the green light. Reading Frequency: Red light twinkles Writing Frequency: Green light twinkles Voices "DU" into any function, "DU DU" to exit any function.
GETTING ACQUAINTED AUXILIARY FUNCTIONS Users can setup the key [PF1] and [PF2] to be one of the optional functions as bellows : • • • • • • • • Squelch off Monitor Current Channel Power Enquiry Frequency Reverse Talk Around Battery Capacity Enquiry TX Power Switch Emergency Alarm 10 Professional FM Transceiver
BASIC OPERATIONS Switch on / off Transceiver Switch on Transceiver: Under power-off state, turn POWER / VOLUME clockwise till hearing "Click" to switch on the transceiver. The transceiver will announce "Power on" when power-on and announce the current channel. Switch off Transceiver: Under power-off state,turn POWER / VOLUME anticlockwise till hearing "Click" to switch off the transceiver.
BASIC OPERATIONS Channels Selection Under the standby conditions, turn channel selector knob to choose the desired channel, and the transceiver will announce the adjusted channel. Turn clockwise to increase the channel, anticlockwise to decrease the channel. NOTE: The transceiver will emit a voice prompt when current channel is blank and the red light will flash. Receiving You can hear the transmitting party's calling when the channel you are operating is called and the LED light turns green.
BASIC OPERATIONS Transmitting Before transmitting, make sure that the channel you want to use is not in busy state through monitoring for a while by pressing the programmed Squelch off [PF1] / [PF2] key. Under these conditions, press the [PTT] key and speak into microphone. Please keep around 2.5-5cm distance between microphone and your lip. And please speak in normal tone to make the receiver obtain best tone quality. Note:Press [PTT] Red LED lighting means transmitting. Release [PTT] to receive signal.
BASIC OPERATIONS Battery Save Setup When this function is enabled, the transceiver can efficiently reduce battery consumption. The transceiver will automatically switch on Battery Save Function when not receiving a signal or making any operations. But when the transceiver receives a matching signal or make operation it will automatically exits this function. Time-out Timer The purpose of the Time-out Timer is to prevent any caller from using a channel for an extender period of time.
BASIC OPERATIONS Resume Factory Default Once transceiver works abnormally for wrong operations or wrong programming, users can start this function to resume all functions and channels as Factory Default. Under standby conditions press [PTT] and [PF1] key synchronously to switch on transceiver. Holding the two keys until hear transceiver announces "DI" beep then release the keys,the transceiver will factory default.
TECHNICAL SPECIFICATIONS General Frequency Range UHF: 400~480MHz Adjacent Channel Selectivity ≥60dB Intermodulation ≥55dB ≥80dB Spurious Rejection Channel Capacity Channel Spacing 16 channels Audio Response 6dB/per interval ≥40dB 12.5KHz Hum & Noise 2.5KHz, 5KHz, 6.25KHz Audio Distortion Operating Voltage 7.4V DC Audio Power Output Battery Life More than 12 Hours (1500mAh), by 5-5-90 work cycle Frequency Stability ±2.
TROUBLE SHOOTING GUIDE Problem No Power Battery power dies shortly after correctly charging. No sound after using microphone for a while Cannot talk to or hear other members in your group Unstable communication with loud background noise Corrective Action A. The battery pack may be exhausting. Recharge or replace the battery pack. B. The battery pack may not be installed correctly. Remove the battery pack and install it again. C. The power switch is broken; send it to local dealers to repair. D.
SAFETYTRAINING INFORMATION Your Qixiang Electron Science & Technology Co., Ltd radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Occupational Use Only”, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the “General Population” in an uncontrolled environment.
