2.
7 7. Precautions Contents 7.1 Normal phenomenon Interruption appears while moving. Please move to a fixed place to watch. As adopting RF control technic, there will be momentary interruption in the picture when using remote control. The transmission distance varies according to the surroundings; the distance of ordinary house is about 10-20 meters. But if the wall is of iron and concrete, it will largely muffle the signal (can not receive signal or shorten receiving distance) 7.2 Using precautions 2.
1 1. Introduction 1.1 Brief introduction Combining 2.4GHz wireless technic and USB TV box technic, UTV240 is known as a Hi-Tech product. Advanced 2.4GHz wireless transmission technic effectively realizes CATV or A/V signal wireless transmission in your house. Connected to your laptop or PC via USB cable, you will be satisfied with enjoying your favorite channels and Hi-Fi A/V programs while using computer. Because of high speed USB2.
2 1.3 Specifications 1) TXV2408 wireless A/V transmitter: Power input: DC 5V 300mA Radio-frequency input: 47-870MHz Video input: 1Vp-p (PAL/NTSC) Audio input: 2Vp-p (L/R) 2.4GHz channel: Four channels (2414,2432,2450,2468MHz) 2) UTV324 wireless USB TV box: USB2.0 port Video input: 1Vp-p (PAL/NTSC) Audio input: 1Vp-p (L/R) Audio output: 2Vp-p (L/R) 2.4GHz channel: Four channels (2414,2432,2450,2468MHz) 1.4 System requirements Operation system: Windows XP (SP2), Vista Pentium2.4G/ Centrino1.4G DirectX 9.
3 24 1.
23 4 6. Product placing and retransmitting 2. Connection and operation 6.1 Transmitter TXV2408 placing 2.1 UTV324 connection illustration 1) CATV watching: When watching CATV, you only need to connect power to CATV signal and place the unit in the proper position. Make sure no obstacle around.
5 22 Front panel: 2.4GHz AV Transmitter 1) TV/AV input source selecting: Freely switch to TV/AV signal or transmit to receiver via 2.4GHz channels (picture1). Only when the input source of transmitter goes with “video input” of receiver, can the signal be transmitted normally. TV AV TV selected status TV AV AV selected status Note: Receiver UTV324 input source selecting instruction: Right-click popup menu will be on UTV324 software interface when right m -ouse down.
21 6 5. Remote control instruction 2) Power on/off Press to enter or exit standby status. Power on/off status panel indicator as below: 5.1 Remote control panel TV Power TV SV AV1 AV2 Channel number input Return TV AV ON: The previous power-off status OFF:All panel indicators off 3) Channel selecting Press CH switch to switch the four 2.4GHz channels.
7 20 3. USB TV driver and software installation 3.1 USB driver installation For better using, please upgrade your system to Windows XP(SP2) or Vista. Driver of USB2.0 TV box series can be installed automatically or manually. Note: Prior to driver installation, please install DirectX9.0 or higher version first.
19 8 4.
9 18 4.4 Recording instruction Click “Yes, restart immediately” and then click “OK”. Manual installation: After correctly install the hardware, when power on to start Windows, the system will detect new hardware, noting “Found New Hardware Wizard”. As the following picture: Recording format: To select the record format. Recording quality: Three options: high, medium, low Image path and video path: To display the saving path of image and video and you can change the saving path as well.
17 10 Antenna: Wireless/cable. Channel list: Display the current channel information for editing channel skip , channel name and frequency. Import frequency list: Import the stored channel list as the current channel list. Export frequency list: Save the current frequency list for any time use. Fine tuning: To adjust for better image effect via fine tuning. Auto-search: Click to enter auto-search, stop when press again. Sequencing: Sequence manually. 4.
11 16 4.1 Device instruction Click to open “function attribute” page, as below: Then click “Finish” to complete driver installation: Country/region: Selecting country/region is to select frequency list of your area, please correctly select you country/region. Video system: When video or S-Video signal input, you can select video system according to the input source.(Note: If the selected system does not go with the input source, the image will be abnormal.
15 12 4. Application software instruction Click “Software” button to enter TVR PLUS installation interface, as the following picture: The main interface of the software, as below: Instruction for common keystrokes: Consecutively perform the following operation: Open “help” file, minimize and close. Tuning box: Click to open or hide tuning box.
13 14 Click “Next”, as the following picture: After finishing automatic installation, the following picture will appear: Click “Browse” to select the desired saving path and then click “Next (N)”as the following picture: Click “Finish” to complete software installation. Note: After installing the software driver, a small icon (TTrayIcon) will appear on the right down corner of your computer.
13 14 Click “Next”, as the following picture: After finishing automatic installation, the following picture will appear: Click “Browse” to select the desired saving path and then click “Next (N)”as the following picture: Click “Finish” to complete software installation. Note: After installing the software driver, a small icon (TTrayIcon) will appear on the right down corner of your computer.
15 12 4. Application software instruction Click “Software” button to enter TVR PLUS installation interface, as the following picture: The main interface of the software, as below: Instruction for common keystrokes: Consecutively perform the following operation: Open “help” file, minimize and close. Tuning box: Click to open or hide tuning box.
11 16 4.1 Device instruction Click to open “function attribute” page, as below: Then click “Finish” to complete driver installation: Country/region: Selecting country/region is to select frequency list of your area, please correctly select you country/region. Video system: When video or S-Video signal input, you can select video system according to the input source.(Note: If the selected system does not go with the input source, the image will be abnormal.
17 10 Antenna: Wireless/cable. Channel list: Display the current channel information for editing channel skip , channel name and frequency. Import frequency list: Import the stored channel list as the current channel list. Export frequency list: Save the current frequency list for any time use. Fine tuning: To adjust for better image effect via fine tuning. Auto-search: Click to enter auto-search, stop when press again. Sequencing: Sequence manually. 4.
9 18 4.4 Recording instruction Click “Yes, restart immediately” and then click “OK”. Manual installation: After correctly install the hardware, when power on to start Windows, the system will detect new hardware, noting “Found New Hardware Wizard”. As the following picture: Recording format: To select the record format. Recording quality: Three options: high, medium, low Image path and video path: To display the saving path of image and video and you can change the saving path as well.
19 8 4.
7 20 3. USB TV driver and software installation 3.1 USB driver installation For better using, please upgrade your system to Windows XP(SP2) or Vista. Driver of USB2.0 TV box series can be installed automatically or manually. Note: Prior to driver installation, please install DirectX9.0 or higher version first.
21 6 5. Remote control instruction 2) Power on/off Press to enter or exit standby status. Power on/off status panel indicator as below: 5.1 Remote control panel TV Power TV SV AV1 AV2 Channel number input Return TV AV ON: The previous power-off status OFF:All panel indicators off 3) Channel selecting Press CH switch to switch the four 2.4GHz channels.
5 22 Front panel: 2.4GHz AV Transmitter 1) TV/AV input source selecting: Freely switch to TV/AV signal or transmit to receiver via 2.4GHz channels (picture1). Only when the input source of transmitter goes with “video input” of receiver, can the signal be transmitted normally. TV AV TV selected status TV AV AV selected status Note: Receiver UTV324 input source selecting instruction: Right-click popup menu will be on UTV324 software interface when right m -ouse down.
23 4 6. Product placing and retransmitting 2. Connection and operation 6.1 Transmitter TXV2408 placing 2.1 UTV324 connection illustration 1) CATV watching: When watching CATV, you only need to connect power to CATV signal and place the unit in the proper position. Make sure no obstacle around.
3 24 1.
25 2 6.3 Antenna placing 1.3 Specifications 1) 2.4GHz antenna using 2.4GHz antenna is all-direction antenna with multi-angle rotating function. When interruption appears on the image (such as snow spot, WIFI), please adjust the 2.4GHz antenna for better effect. Rear view Left view 1) TXV2408 wireless A/V transmitter: Power input: DC 5V 300mA RF: 47-870MHz Video input: 1Vp-p (PAL/NTSC) Audio input: 2Vp-p (L/R) 2.4GHz channel: Four channels (2414,2432,2450,2468MHz) 2) UTV324 wireless USB TV box: USB2.
1 26 1. Introduction 1.1 Brief introduction Combining 2.4GHz wireless technic and USB TV box technic, UTV240 is known as a Hi-Tech product. Advanced 2.4GHz wireless transmission technic effectively realizes CATV or A/V signal wireless transmission in your house. Connected to your laptop or PC via USB cable, you will be satisfied with enjoying your favorite channels and Hi-Fi A/V programs while using computer. Because of high speed USB2.
27 7. Precautions Contents 7.1 Normal phenomenon Interruption appears while moving. Please move to a fixed place to watch. As adopting RF control technic, there will be momentary interruption in the picture when using remote control. The transmission distance varies according to the surroundings; the distance of ordinary house is about 10-20 meters. But if the wall is of iron and concrete, it will largely muffle the signal (can not receive signal or shorten receiving distance) 7.2 Using precautions 2.
28 8. Troubleshooting Troubleshooting1: Indicator invalid, no picture. Solutions: Check whether transmitter and receiver are powered on. Change the transmission channel of the receiver (refer to operation manual/channel switch). Adjust the place of transmitter and receiver (refer to connection illustration). Troubleshooting2: Remote control retransmission invalid. Solutions: Check whether the transmitter is right connected (refer to connection illustration of transmitter).
FCC NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.