User's Manual

User Manual for
the Yeelight Bedside Lamp
Get started
Connect to the power supply
Connect the adapter to the power source and plug the other
end into the bedside lamp jack
Adapt e r
* It is recommended that you place the lamp be placed on a bedstand or desk
Switch on the bedside lamp
Press the button lightly to switch the lamp on/off
Power O n /Off butto n
Press the button lightly to switch between preset scene modes
Scene butto n
Slide your finger around the edge to adjust the brightness
Touch area
Intelligent control
Yeelight bedside lamp
Turn on Bluetooth on your phone
Scan the QR code or download the Yeelight bedside lamp
app from the app store
Also supports Mi Smart Home
* Please upgrade the product in a timely manner to add more functions
and optimize user experience.
To buy mor e smart products,
please v isi t mi.com or check out
the Mi S mart Home app t o buy
and use directl y.
Please read this manual c aref ully
before using the product
Delayed switch-off
Hold down the Power On/Off button until the light flashes
gently, and release it to enable the delayed switch-off function
Manual color adjustment
Hold down the Scene button and slide your finger around the
edge to adjust the color
* The default setting for delayed switch-off is 15 minutes. The time can be changed in the app.
* This does not change the colors of the preset scene mode.
Power On/Off button
Scene
button
Factory reset
Hold down the Power On/Off button and plug in the power adapter;
the bedside lamp has been restored to the factory settings when
the light comes on.
Safe mode
* Use the mode with caution when the lamp works normally
Scene
button
Power O n /
Off butto n
Product features
Basic parameters
16 million colors
Colorflow
Dimming
Timer switch
Nightlight
Firmware upgrade
Delayed switch-off
Color temperature
adjustment
Eye protection
Mobile control
Scene switch
Touch sensitive
If a fault that doesn't result from human error occurs within the Three Guarantees period,
the customer is entitled to the following services:
Situations that are not covered by the Three Guarantees services include,
but are not limited to, the following:
1. The customer doesn't hold a Three Guarantees certificate or a valid invoice, or his/her
Three Guarantees certificate has expired;
2. The product is damaged because it has not been used, maintained or stored in accordance
with the instructions stated in the user guide;
3. The product is damaged due to fire, flooding, lightning or other force majeure events;
4. The model number or code on the warranty certificate does not match the product;
5. Normal discoloration, wear or deterioration is not covered under warranty.
1. Always use the standard power adapter in order to avoid product damage or safety hazards;
2. Do not disassemble or repair the product yourself, in order to avoid damaging the product;
3. Keep away from water to avoid water damage to the product;
4. Keep away from sources of heat and fire;
5. Do not cover the bedside lamp with clothing, bedding, etc., to avoid overheating.
Thank you for purchasing t his product. The Y eelight
bedside lamp is a next-generat ion light ing product that
combines the advanced L E D and int elligent technolog
y.
It uses high-quality LED light beads combined wit h a
light mixing algorithm and pat ent ed opt i c al structure t o
produce natural light, offering a perf e ctly unif orm and
full-color lighting ex perience.
1. If any of the faults listed in the Yeelight Bedside Lamp Faults occurs within 7 days of receiving
the product, the customer can choose to return the product or receipt of a direct replacement free
of charge at the discretion of an after-sales service center following an inspection;
2. If any of the faults listed in the Yeelight Bedside Lamp Faults occurs within 8-15 days of receipt
of the product, the customer can receive a direct replacement free of charge at the discretion of
an after-sales service center following an inspection;
Lamp jac k
Adapter plug
Slide your finger around
the edge to adjust the brightness
Power On/Off button
Scene button
Turn on the bedside lamp, open the app and connect by
following the instructions shown on
the user interface
Please visit http://fuwu.mi.com
or call 400-100-5678 for more info about after-sales services.
Executive standard: Q/QDYLK0001-2015
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd.
Add: International Innovation Park, 169 Songling Road, Laoshan District, Qingdao, China
The Three Guarantees Certificate for
the Yeelight Bedside Lamp
Customer name (Mr/Mrs/Miss/Ms)
Customer address
Product model
Store of purchase
Store address
Invoice number
Contact number
Serial number
Purchase date
Purchaser
(seal)
The Three Guarantees Certificate for
the Yeelight Bedside Lamp
Product name: Yeelight bedside lamp
Color adjustment: 16 million colors
Height: 221mm
Weight: 680g
Diameter: 100mm
Luminous flux: 300lm
Lifetime: 20,000h
Color temperature range: 1,700 K-6,500 K
Product model: XMCTD01YL
Supported platforms: Android & iOS
Communication mode: Bluetooth 4.0
Dimming: Touch wheel dimming,
software dimming
Rated input: 100-240V ~ 50/60Hz 0.5A
Bedside lamp input: 12V 1A
Rated power: 10W (14 x 0.7W/LED Module)
Operating temperature: -20 to 45℃
Declaration of toxic and hazardous substances
contained in electronic information products
Component
name
Lamp body
Adapter
Accessories
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(CrVI)
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Toxic and hazardous substances or elements
O: Indicates that the toxic or hazardous substance contained in the component is within the
limit stipulated by the Requirements for Concentration Limits for Certain Hazardous
Substances in Electronic Information Products SJ/T11363-2006 standard.
X: Indicates that the toxic or hazardous substance contained in a component exceeds
the SJ/T11363-2006 standard.
The black diode on the PCB in the main body of the bedside lamp contains a trace amounts of
lead. This product meets EU RoHS environmental requirements. Due to absence of a mature
technology, the trace amounts of hazardous materials contained in the product cannot
currently be replaced or reduced:
The Three Guarantees Certificate for
the Yeelight Bedside Lamp
Warranty Regulations
Yeelight bedside lamp after-sales service commitment: the Three Guarantees after-sales services
are provided in strict accordance with the "Law of the People's Republic of China on Protection of
Consumer Rights and Interests" and "Product Quality Law of the People's Republic of China":
3. If any of the faults listed on the Yeelight Bedside Lamp Faults occurs within 12 months of
receipt of the product, the customer can choose to ha
ve the product repaired for free at the
discretion of an after-sales service center following an inspection.
Yeelight Bedside Lamp Faults
Name
Lamp body
Fault
Power On/Off button failure
Scene button failure
Cracks in the outer casing due to structural or material defects
Touch function failure
Inability to power the bedside lamp
Adapter
If the lamp does not work normally after a firmware upgrade, plug in the
power adapter while holding down the Scene button. The lamp will be
booted into safe mode and the firmware upgrade can be implemented.
Please note:
Advanced functions
Non-Warranty Regulations
The Three Guarantee Certificate can be cut off along the dotted line
Customer name (Mr/Mrs/Miss/Ms)
Customer address
Product model
Store of purchase
Store address
Invoice number
Contact number
Serial number
Purchase date
Purchaser
(seal)
FCC COMPLIANCE STATEMENT
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.This Ths
This device complies with FCC RF Exposure requirements for general use conditions.
To safisty FCC RF exposure requirements for this device, The antenna(s) used
for this transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.