pico neo 2 A New Reality Virtual Reality All-In-One Headset Pico Neo 2 User Guide R01-20190903.
|Warning Please do not expose the optical lens of the helmet to the sun to prevent damage to the helmet screen. Permanent yellow spots may be caused to the screen in less than on minute when the lens is exposed to the sun, both indoors and outdoors. Please note that such physical damage is not covered by the warranty of the product. 40 Pico Neo 2 User Guide R01-20190903.
| Important Notes · It is recommended that you use this product in an open and safe indoor area (at least 2m * 2m). Please confirm that you are in a safe environment without any discomfort before using it. Remember to avoid accidents, especially when you move indoors with the helmet on. Pleas wear the lanyard when using the handle, and make sure that there is enough space around your head and body to stretch your arms to avoid injury to others or yourself.
| Package Details VR Headset x1 The main color of the basic version is white the main color of the Pro version is gray Controller x2 Two-in-one USB-C Charging Cable x1 USB-C 2.0 Data Cable x1 Controller Lanyard x2 For charging the controller only No data transmission function AC Adapter x2 User Guide x1 Lens Cleaning Cloth x1 42 Pico Neo 2 User Guide R01-20190903.
|VR Headset Instructions Cooling Fan Stereo-fisheye Camera Inside Out tracking and crossing of the VR Headset. No block when using it. Pico Neo 2 User Guide R01-20190903.
3.5mm Power Jack Maximum 5V/2A DC power supply Head Strap 60GHz Antenna Removable Three lengths to adjust Back Cushion Removable *For Pico Neo 2 Pro only Face Cushion Secondary Mic Removable USB-C Interface Charging or USB 3.0 data transmission USB 3.0 OTG device extension Status Indicator For detailed status please refer to the explanation of status indicator Power Button Battery Holder Strap Knob HOME Button · Short press to return to the Side Strap main interface.
Proximity Sensor Left Loudspeaker · The system automatically wakes up when the VR Headset is on. · The system automatically sleeps when the VR Headset is off. Main Mic Right Loudspeaker Earphone Jack Volume Button Pico Neo 2 User Guide R01-20190903.indd 45 Micro SD Card Slot Eye Tracking *For Pico Neo 2 Pro only.
| Controller Instructions Rocker Clicking by pressing down is available Return Button Can be set as other functions in specific applications HOME Button · ON: short press · OFF: long press for 4 seconds · Reset: long press for 10 seconds · Return to the main interface: short press · Screen center correction: press for 1 second Status Indicator For detailed status please refer to the Explanation of Status Indicator 46 Pico Neo 2 User Guide R01-20190903.
Pico Neo 2 User Guide R01-20190903.
Explanations of status indicator of the VR Headset Color of the status indicator Status of the system The red light is always on Charging. The battery is less than 20%. The yellow light is always on Charging. The battery is less than 90%. The green light is always on Charging finished. The battery is more than 90% or full. The blue light is always on Starting up or working. The red light flickers The battery is less than 20%. The blue light flickers Shutting down.
| Play Space Since there is no cable constraint, your movements in the real world will be same as in the virtual world, so it is recommended that you ensure a safe play area before you start playing. 1. Prepare a clean and safe indoor area of at least 2m * 2m; 2. Charge the helmet and handle first; 3. Wear the handle lanyard; 4. Set the security area according to the notice on the screen after starting up. Pico Neo 2 User Guide R01-20190903.
|Wearing Instructions - Turn on the VR Headset Long press the Power button for 2 seconds (until the blue light is always on) to trun on the VR Headset. 50 Pico Neo 2 User Guide R01-20190903.
-Connect the Controller After the VR Headset is turned on and worn, press the HOME button of the controller (until the blue light flickers) to turn it on, and the system will automatically complete the connection. When the connection is complete, the status indicator of the controller is blue, and the virtual controller and rays are visible in the VR Headset. Pico Neo 2 User Guide R01-20190903.
-Wear the VR Headset Note: Since this device has no myopia adjustment function, please do not remove your glasses when wearing it. 1 Adjust the strap knob to the maximum or appropriate size and rotate the strap up to allow enough space for your head 52 Pico Neo 2 User Guide R01-20190903.
2 cover your glasses with the face cushion of the VR Headset Pico Neo 2 User Guide R01-20190903.
3 Rotate the strap down and place the back cushion over your head 54 Pico Neo 2 User Guide R01-20190903.
4 Fine-tune the strap knob and the wearing position until it is comfortable and clear Pico Neo 2 User Guide R01-20190903.
| Operation Instructions - Rocker operation Shaking in four directions are available to perform page-turning operations; Clicking by pressing down is available. 56 Pico Neo 2 User Guide R01-20190903.
-Browse contents You can switch to what you want to browse by moving and rotating the handle/helmet and select the content with the Trigger button of the handle or the OK button of the helmet. Note: You can operate by turning your head and clicking the buttons on the VR Headset if the controller is not connected. Pico Neo 2 User Guide R01-20190903.
- Screen center correction Wear the VR Headset and look straight ahead, press and hold the HOME button of the VR Headset/controller for more than 1 second to correct the center of the screen, and adjust the interface to the current field of view.
- Hardware reset If the HOME button and all button status indicators of the VR Headset do not respond, or the virtual handle in the VR Headset is stuck, you can press the HOME button for more than 10 seconds to restart the handle. If the VR Headset dose not respond after short-press the HOME button or the Power button, or the picture in the VR Headset is stuck, you can press the Power button for more than 10 seconds to restart the VR Headset.
- Replace and clean the face cushion Please follow the figure below to put the face cushion into the VR Headset gap along the edge. The removal steps are reversed. *Note: It is recommended to wipe the face cushion with a small amount of water. No dry cleaning, machine washing, exposure to the sun or contact with organic solvents. Otherwise, it may be less comfortable when the face cushion contacts your face, and the chance of the glasses colliding with the optical lens may increase.
|Wireless Streaming Hub (for Pico Neo 2 Pro only) You can use the Pico Wireless Streaming Hub to relay the interesting games in the PC Steam VR for a better VR experience. -PC’s Configuration requirements A VR-ready PC may be needed to run the game in the SteamVR platform. For PC’s configuration requirements and installation, please visit the SteamVR’s official website . Pico Neo 2 User Guide R01-20190903.
-Connection method Please connect the wireless streaming hub as shown below. After connection, open the “Pico Wireless Streaming” application in the VR Headset and follow the instructions on the screen. 62 Pico Neo 2 User Guide R01-20190903.
-Explanation of status indicator of the wireless streaming box Color of the status indicator Status of the system INTERNET The orange light is always on. INTERNET Searching the network. INTERNET The blue light is always on. INTERNET Internet connected. 60GHz The orange light is always on. 60GHz Waiting to be connected. 60GHz The blue light is always on. 60GHz Connected. 60GHz and INTERNET The white light flickers. The firmware is updating. INTERNET The red light flickers.
-Play space of PC Steam VR wireless streaming 64 Pico Neo 2 User Guide R01-20190903.
Pico Neo 2 User Guide R01-20190903.
Please refer to the User Guide of the Wireless Streaming Hub for detailed instructions. 66 Pico Neo 2 User Guide R01-20190903.
| Safety Warnings Please carefully read the following warnings and information before using the VR Headset and follow all guidelines on production safety and operation. Failure to follow these guidelines may result in physical injuries (including electric shock, fire and other injuries), property damage and even death. If you allow others to use this product, you shall be responsible for ensuring that every user knows and follows all the instructions on production safety and operation.
• This product provides an immersive virtual content experience and some types of content may cause your discomfort. Stop use immediately and seek medical treatment when the following symptoms occur.
• Pl e a s e d o n ot s q u e eze th e e q u i p m e n t d u r i n g u s e to a vo i d d a m a g e to th e equipment and lens, resulting in facial injuries. • Do not use strong chemicals, cleaning agents or strong detergents to clean the equipment or its accessories, which may cause material changes that affect eye health. • Do not allow children or pets to bite or swallow the equipment or its accessories in case of injuries, or failure or explosion of the equipment.
• Do not store or transport the equipment and its matching mobile devices in the same box with flammable liquids, gases or explosive substances. Transportation safety • Do not use VR VR Headsets when walking, cycling, and driving or other situations that require concentration. • Do not use VR VR Headsets when riding, as irregular vibration will increase the burden on your vision and brain.
|Product Warranty Terms You can repair your device for free in 12 months since purchase date. Please contact with Pico if you need repair services. Warranty Tips The Limited Warranty does not cover: 1.Defects or damage resulting from improper usage, maintenance or storage not included in this manual; 2.Packing box or gifts other than the main device; 3.D efe c ts or dam ag e resultin g f rom un a uth orize d dism antlin g, alte ration an d maintenance; 4.
Headset: Frequency Range (BT/WIFI): 2400-2483.5MHz and 5150-5350MHz and 5470-5725MHz 5150-5350: Indoor use only Max Output Power: 2.4G WIFI: 20dBm BT: 7dBm 5150-5725MHz: 20dBm HW Version: R2 SW Version Format: CCCC_rf01_bvY/_svZ.ZZ_YYM M DD_Bttt "CCCC" stands for the nation. "YY" stands for Baseband Version. "Z.ZZ" stands for the Software Version. "YY" stands for the update year. "MM" stands for the update month. "DD" stands for the update date. "TTT" stands for the Build No.
Disposal and recycling information The crossed-out wheeled-bin symbol on your product, battery, literature of packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage.
|FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
|Laws and Regulations Copyright © 2015-2019 Qingdao Pico Technology Co., Ltd.. All Rights Reserved This information is for reference only and does not constitute any form of commitment. Products (including but not limited to color, size, screen display, etc.) shall be subject to physical objects. User Software License Agreement Before using the product, please read the software license agreement carefully. When starting to use the product, you agree to be bound by the license agreement.