User's Manual

ManualsBrandsQingdao Intelligent&Precise Electronics ManualsElectronicsWLAN module

Qingdao Intelligent & Precise Electronics Co., Ltd

ZDGFMT7601U-B User Manual

Product Name：IEEE 802.11 b/g/n 2.4GHz 1T1R, USB Module

Model ：ZDGFMT7601U-B

Summary of content (6 pages)

PAGE 1
Qingdao Intelligent & Precise Electronics Co., Ltd ZDGFMT7601U-B User Manual Product Name：IEEE 802.11 b/g/n 2.
PAGE 2
1. Introduction Thank you for using the Wi-Fi module product provided by Qingdao Intelligent &Precise Electronics Co., Ltd. Before use, please read this user manual carefully. Please follow the technical specifications when using the module in your design and develop activities. Qingdao Intelligent &Precise Electronics Co., Ltd has the right to change the contents of this manual in accordance with the needs of the technical development.
PAGE 3
Region Selection Limited by local law regulations, version for North America does not have region selection option. Label Host labeling requirement: Contains transmitter module FCC ID： 2AJVQ-MT7601UB”. 2．Product Information 2.1 Product Information ZDGFMT7601U-B Wi-Fi USB module is a wireless signal module device work at 2.4GHz (2.400 ~ 2.4835GHz). ZDGFMT7601U-B comply with IEEE 802.11b、802.11 g、802.11 n standard. It supports up to 150Mbps physical layer transmitting rate. ZDGFMT7601U-B support USB 2.
PAGE 4
Receiver Sensitivity 11b @ 11Mbps: (Max.) : -84dBm , (Typical) : -87dBm (PER<8%) 11g @ 54Mbps: (Max.) : -69dBm , (Typical) : -75dBm (PER<10%) 11n @ MCS7 (2.4g HT20): (Max.) : -67dBm , (Typical) : -73dBm (PER<10%) 11n @ MCS7 (2.4g HT40): (Max.) : -64dBm , (Typical) : -68dBm (PER<10%) Working Voltage 3.3V±10% I/O supply voltage Antenna Gain 1.02dBi（MAX） Antenna type Onboard Antenna Working Temperature -10~+70℃ Storage Temperature -40~+125℃ 4. Hardware information 4.
PAGE 5
EU single contact point Hisense Czech (Manufacture) s.r.o. U Nové Hospody 1164/4, 301 00 Plzeň ,Czech Republic. 6 Manufacture’s postal address No.218, Qianwangang Road, Qingdao Economic & Technological Development Zone, Shandong, China 7 Importer’s name & address Hisense Czech (Manufacture) s.r.o. U Nové Hospody 1164/4, 301 00 Plzeň ,Czech Republic.
PAGE 6
8. The requirement for KDB 996369 D03: 8.1 List of applicable FCC rules FCC Part 15. 247. 8.2 Summarize the specific operational use conditions None 8.3 Limited module procedures The module is a single module, so this requirement is not applicable to the product. 8.4 Trace antenna designs The module uses the permanent PIFA antenna, so this requirement is not applicable to the product. 8.