Tablet POS HM628N User Guide 1
Safety Precautions Do not subject the device to severe impact or drop it from heights. Do not use the device in extreme hot or cold, dusty or damp conditions. Do not expose it to direct sunlight. Avoid using the device near strong magnetic fields. Normal functioning of the product may be disturbed by ESD. If so, simply reset and restart the device following the instruction manual.
The device should not be exposed to dripping or splashing. Never place objects filled with liquids, such as vases, on the device. There is danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type. The battery (battery or batteries or battery pack) should not be exposed to excessive heat such as sunlight, fire or the like. Please follow responsible procedures for battery disposal.
Listening Cautions This product respects the current regulations for limiting the output volume of consumer audio devices to a safe level. By listening to your device with headphones or earbuds at high volumes, you run the risk of permanent damage to your ears. Even if you get used to listening at high volumes and it seems normal to you, you still risk the possibility of damaging your hearing. Reduce the volume of your device to a reasonable level to avoid permanent hearing damage.
Features & Functionality Tablet Front view 1. Power indicator Indicates the battery-charge status. 2. Front camera Capture a front view picture or record videos. 3. Tounch screen Support with multi-touch . Top view 1. Combo audio jack Connect to MIC or earphone. 2. Built-in microphone Capture voice which can provide sound input to make calls using web-based apps, audio recording. 3. Scanner 1 D barcode scanner or 2 D scanner(optional).
Left-side view 1. AC power apdapter jack Connects to the AC power adapter. 2. USB 3.0 port Connects to USB devices. 3. Micro USB port Connects to USB devices. 4. Micro SD card slot Accommadate micro SD card. 5. Volum button Increases or decreases the volum level. 6. Power button Press and hold on to turn on or turn off the devices. Notes: Stander models have not the LTE module ,please refer to the actual product. Bottom view 1.
Rear view 1. Magnetic card reader Swipes Magnetic cards. 2. Non-contact card reader Contactless integrated circuit card (optional). 3. Scan button Press the button to scan. 4. Rear camera Captures pictures or videos. 5. Ports cover Built-in ports. 6. Speaker Provides audio output. 7. Lock latch Lock the tablet on the Smart dock. Notes: Stander models do not support RFID ,please refer to the actual product.
Charging Dock(optional) Attach the tablet to the dock 1. Charging Dock 2. Dock latch Top view Rear view Attaches the table to the dock. keeping the tablet.fixed in place. 3. Pogo pin connector Connects the tablet to the dock 4. AC power apdapter jack Connects to the AC power adapter. 5. USB 2.0 port Connects to USB devices. Smart dock(optional) Attach the tablet to the dock 1.
2. Printer cover Cover for printer.(not supplied). 3. Keyhole Inserts a key to lock the tablet. 4. Dock latch Attach the tablet to the dock 5. Pogo pin connector Connects the tablet to the dock. 6. Lock-tongue Lock the tablet on the Smart dock. 7. Cashdrawer port Acess Cashdrawer. 8. AC power adapter jack Connects to the AC power adapter. 9. COM RS232 COM3/4. 10. Ethernet port Connects to cable. 11. USB 2.0 port Connects to USB devices .
Basic Connections Charging the tablet Notes: If using the tablet for the first time, or after a long period of idle time, charge the battery for more than half an hour before turning it on, to ensure system stability. The tablet has a built-in rechargeable battery. Charge the device when the battery level is low. 1. 2. 3. Plug the power adapter into the DC-In socket. Open the port cover on the left.
Removing a micro SD card 1. 2. 3. 4. 5. Touch the Tray button in the notification area in the lower-right corner of the screen. Touch Safely Remove Hardware . Touch Eject XXXX SD Card. A message appears confirming that the micro SD card can be safely removed. If a warning message appears stating the micro SD card cannot be removed, ensure all data transfers involving the micro SD card are complete. Press on the micro SD card to release it. Slide the card out after it pops out from the micro SD card slot.
Cash drawer setting 1.
Basic Operation Turning On the Tablet Note: This device has been equipped with Windows 10 system at the factory, so user need not perform Windows setup again before using for the first time. Press and hold the Power button to turn on your tablet. The lock screen appears. Now the tablet is ready for use. Note: If the login screen is not enabled in Windows 10, you will be taken directly from the lock screen to the Start screen.
Turning On/Off screen Usually, user can press once the power button to turn on/ off the screen display. Optionally, user can also use the Start menu: to bring up Start menu. 1. Touch the Start button 2. Touch Power → Sleep to turn off the screen. Connecting to a wireless network Turning On/Off Wi-Fi 1. Touch Wi-Fi icon on the lower-right corner of the taskbar to view the available wireless networks. 2. Touch Available Wi-Fi icon to turn on/off Wi-Fi connection. Connecting to a wireless network. 1. 2. 3.
Gestures Your tablet has a multi-touch display. You can touch the screen to operate the tablet. Finger Gesture Touch Tap gently on the display with your fingertip. You can do Select items on the screen, including options, entries, images, and icons. Start apps. Touch buttons on the screen. Input text using the on-screen keyboard. Touch and Hold Touch and hold your finger on the display. Display detailed information about an item. Open the context menu of an item to perform further actions. Drag 1.
Locking the screen orientation For optimal viewing experience, the screen orientation changes automatically to portrait or landscape format depending on how you hold the tablet. You can disable automatic screen rotation and lock the screen in portrait or landscape mode. Note: Some apps may not support automatic screen rotation and are designed to work only in one orientation. 1. 2. 3. Change the screen to the desired orientation.
types of paper rolls may affect the printing effect and the life of the print head; If the paper roll is contaminated by chemicals or oil, the contaminated part of the paper roll may fade or the printing effect is not clear; Do not use sharp objects to scratch the thermal layer of the paper, which may make the printing effect unclear; When the temperature exceeds 70°C, the thermal layer of the paper will fade.
Maintenance Cleaning Your Tablet Caution: Before you clean your tablet, disconnect all the cables and turn off the tablet. Clean your tablet with a soft cloth dampened with water. Do not use liquid or aerosol cleaners, which may contain flammable substances. 1. Turn off your tablet. For more information on turning off your tablet, 2. Disconnect any attached devices, headphones, and speakers from the tablet and from their electrical outlets. 3.
Major Specifications Note: The following specifications may contain technical inaccuracies or typographical errors. We reserve the right to improve and/ or change specifications at any time without prior notice. Item Descriptions CPU View the system information for details* You can view details as follows: Open the Control Panel, and select System and Security → System Memory Maximum supported capacity 4 GB Storage 64 GB Camera Front camera :2.0 MP;Rear camera:5.
FCC Statement This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.