Tablet POS HM518 USER MANUAL Qingdao Hisense Intelligent Commercial System Co., Ltd.
Part 1. System Introduction 01. Safety Notices Before Installation or Use 02. System Introduction 03. General Specifications 04. Front View 05. Back View 06. Dimension 07. I/O View Part 2. System Installation 01. Checking the Location for Installation 02. Before Connecting Peripherals 03. Connecting DC power supply cable 04. Package Part 3. Product Layout 01. Motherboard layout 02. Motherboard Module&Function 03. Product layout 04.
Part 1. System Introduction 01. Safety Notices Before Installation or Use Caution: ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ It is required grounded well and the supply voltage shall be stable, and you must confirm that the voltage of the outlet provides shall be in line with the voltage marked on the lable of the unit. Be sure not to sprinkle any liquid or fall any object into the unit. Be sure not to keep heavy, strenuous movement, shake & heavy strike away from the POS.
☆ ☆ ☆ ☆ ☆ ☆ This product conforms with standard EN50332. Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss. The product shall only be connected to a USB interface of version USB2.0，this interface can provide maximum current of 500mA. Extreme Operating Temperature : 40℃ The device complies with RF specifications when the device used at 10mm form your body.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
03. General Specifications Item Description CPU Intel Celeron, N2807 Memory 2G Byte RAM Storage 32GByte eMMC System Win8.1 Pro/Embedded/with Bing Operating Temperature 0℃ ~ +40℃ Operating Humidity 10% ~ 90% Display TFT LCD 10.
04. Front View 05.
06. Dimension 07.
Part 2. System Installation 01. Checking the Location for Installation It is important to choose a safe and secure place to install the terminal. •• Choose a desk or table big and strong enough to support the weight of the system and peripherals. •• Choose a flat, hard surface. Carpeted area can generate static electricity that can alter memory or damage system components. •• Make sure a system installed in a well‐ventilated place and keep the space free around the system.
02. Before Connecting Peripherals To connect peripherals first remove the 'Interface cover', which is in the bottom of the system. 03. Connecting DC power supply cable Docking station : Connect the DC power cable to the DC power input connector at the bottom of the system. (Adapter 100V ‐ 240V free voltage of the system can be used.
Tablet : when using 12V adapter for tablet charging, Connect the DC power input cable to the DC power input Port at the side of the tablet.
04. Package a. Docking station Package： AC adapter, Power Cord, Docking station b.
Part 3. Product Layout 01. Motherboard Layout 02.
7 8 9 10 11 12 13 14 15 16 17 18 19 20 MIC Speaker DC Jack Audio USB IC Button LED BIOS-battery connector GPS 3G 3G Camera/card reader GPS 03. Product Layout MIC connector Speaker connector DC Jack connector 3.5mm stereo headphone USB2.
02.
