Quick Use Guide of H9380S Android IPC QUICK USE GUIDE H9380S Android IPC V1.
Quick Use Guide of H9380S Android IPC Contents 1. Product overview ............................................................................................................................................... 3 2. Structural dimensions and interface definitions ................................................................................................. 5 2.1 Structural dimension diagram ...............................................................................................................
Quick Use Guide of H9380S Android IPC 1. Product overview The H 9380 S Android IPC industrial computer uses the Cortex microprocessor and the Android operating system design high reliability, high stability intelligent industrial control device. It provides operating environments such as Android 4.4.2 / 5.1 , and urban services and business networking applications APP can run directly in an industrial computer system to provide convenient interactive services for end users.
Quick Use Guide of H9380S Android IPC Equipment item Specification Maximum normal operating power consumption of the device (with modules, without other peripherals) approx .
Quick Use Guide of H9380S Android IPC Equipment item Specification Cloud management platform Support Other NTP/RTC clock synchronization support 2. Structural dimensions and interface definitions 2.1 Structural dimension diagram The structural dimensions are shown in Figure 3-1. The units corresponding to the physical dimensions of the equipment are millimeters. V1.
Quick Use Guide of H9380S Android IPC Figure 3-1 Appearance dimension diagram 2.2 Panel interface diagram 2.2.1 Standard version of the panel interface diagram The standard version of the interface is shown in Figure 3-2-1, 3-2-2. Figure 3-2-1 Front panel interface diagram Figure 3-2-2 Rear panel interface diagram Table 3-1 Standard panel interface table V1.
Quick Use Guide of H9380S Android IPC 485 serial port)(Reserve) V1.0 ⑥ SPK interface ⑭ Wifi antenna interface ⑦ A custom button (can be used as the main APP startup space exit, maintenance mode, etc.
Technical Specification of H9380S Android IPC 2.3 Interface definition 2.3.1 External interface diagram The DB9 serial port of the H 9380S IPC with the interface pins shown in Figure 3-3-1 below. Figure 3-3-1 DB9 Interface Diagram DB9 pin table V1.
Technical Specification of H9380S Android IPC 2.3.2Internal interface diagram When using jumper cap connections to select an interface, be sure to wire as follows. Figure 3-3-2Serialportreuse Serial port multiplexing interface specification table V1.
Technical Specification of H9380S Android IPC 2.3.3LED status table The H 9380 S Android IPC has four LED indicators that indicate the operating and network status of the H 9380 S Android IPC. The LED status is described in the following table.
Technical Specification of H9380S Android IPC 2.3.4USB/TF card upgrade status table During upgrade Upgrade successful Upgrade failed 3. Slow flashing of all LEDs except power supply (on 0.25 S, off 1.75 S) All LEDs are solid except power Flash all LEDs except power (on 0.25 S, off 0.
Technical Specification of H9380S Android IPC n State management Enables cloud platform remote statistical analysis device to escalate operational status Support for cloud platform device failure management Timing on-off Audio and video output GPIO port interface Reservation 4. Timing on-off Support the user to control the power off completely and protect the power off fully Audio output Supports 3.
Technical Specification of H9380S Android IPC Power-on operation Power on the device and the power indicator (PWR) is always on, indicating a successful power-on to the device. After 20-30 seconds, the system/self-starting APP LED (SYS/APP) illuminates every 4 seconds, indicating that the device is operating normally.
Technical Specification of H9380S Android IPC 5. Maintenance Ensure that equipment is not wet or damaged in the field or in the open air. To ensure the insulation between the equipment and the contact body, the live articles shall not be exposed to the equipment. No modules and components on the device may be replaced while the device is charged. Do not open or remove the equipment without the guidance of our professional staf V1.
Technical Specification of H9380S Android IPC This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. Support Frequency Bands and Power: 2.
Technical Specification of H9380S Android IPC 1. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment 2. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Technical Specification of H9380S Android IPC 1. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. 2.