TO CUSTOMERS Thank you very much for using our two way radio. This radio of modem design is reasonable structures with stable functions. it is designed to mast diffs rant customers’ need for high quality with easy operation and perfect capability. Wa believe you are pleased with ite nice shape and excellent performance. This mans! iz suitable for using the mess! of TH-BUSYBODY.
Contents Using tips Unpacking and checking shipments Battery Antenna Installing and Uninstalling of supplied accessories Gelling familiar Working mods Detailed Function Descriptions Basic Operations Optional Accessories Trouble shooting guide Specifications Warranty card Hitler ww 11888 com
Using tips Please read the following brief instructions, non-compliance with these rules may cause danger or violate the law. Obey the local government regulation before using this radio, improper use may violate the law and ba punished. Tum off the radio before entering flammable or explosive areas. # Do not charge or change the battery in flammable or explosive areas. # Tum off the radio before getting close io the besting zone or detonator areas.
Battery Please use F¥7 designated battery; other batteries can cause explosion and hurt people. Hotpots: 1. Sapless do not sheet-cliroult the battery intermingles or poss of In ire. Do not dissemble the battery by yourself, 2. Charge the battery ha tween temperature DC and 45°C. The battery can not ba fully charged beyond this temperature tangs. 3. Pleas urn off the post when you chars the radio with battery. Transmit with the radio in charge will affect His correct charge. 4.
Charging operations: Charge tha battery as follows: 1) Power off 2) Insert the DC adapter plug in the DC jack on the back of charger 3) insert the AC adapter plug in the AC power output socket 4) Insert the battery or radio with battery vertically in a charger, to check whether the battery and charger terminal is in normal contact. 5) Make sure the battery and charger terminal is in good contact, when the charging indicator light turns ned, it starts changing. Note: 1.
Antenna Short thick antenna is suitable for shore-distance communication, while long thin antenna will offer you a better communication effect. Wearing the radio in your waist will not make you feel uncomfortable. The communication range will be shortened in bed weather or among the frees, pleases prepare In advance to veld any inconveniences of your communication and security.
installing and removing the antenna 1) Align the threaded end of antenna and the threaded hole at the lop of radio, rotate the antenna clockwise until it is tight. {picture 3) 2} To remove the antenna, rolls it counter-clockwise until the antenna spirals out. {picture 4} (picture 3) (picture 4) Installing/removing the bait clip 1} Align the two holes of belt clip and the two holes of the radio, fix them with the supplied M2.5x8 screw.
installing external headset Reveal {do not removes) the mic/spsaker jack cover {picture 7), insert the headset info the speakerphone jack (pictures 8}. Note: Using the external headset will affect the water-fishiness performance of radio.
Getting familiar Channel Knob Using to adjusting the Shanna! and frequency Powerhouse Knob this ironic! toggle ihe receiver's Antenna —— | power nonfood and adjust the volume cornet the supplied antenna hare. elev. LED indicator light The indicator light tums red when transmit, tums green wham receive. ft blinks rad when the battery capacity Is low, and vine green when scanning. Speaker the internal speaker is locate hers.
LCD DISPLAY You will aes various icon shown on the screen when prows un. The following fable can help you identify icons’ meaning which display on LED.
Hill Throw 188 com Working mode Frequency Demode} Under this mods, you can uss 7) key to changes the frequency, then press Error 3, or the channel nab of input the frequency by keypad directly and store channel. Frequency Channel (MR) Mode When you have stored a emery channel at least and under VFO mods, press {IP key io enter MR mode. The frequency will be indicated on the display and the channel No. will be indicated at the right side.
SET MENU MODE I Channelization! Scan 02 | TEASEL EDIT BUSY Priority Transmit 03 | VOX 1-8 VOX Level Setting 04 | POWER LOW / HIGH High Flow TX Power 08 | sub 6-8 SOL level setting a8 | WAIT ON/OFF Dual Walt Standby OF | LED ON {AUTO / OFF LED Display mode 08 | LIGHT COLOR / COLOR / COLORS | Background Light Color 08 | BEEP ON OFF Keypad Vesper Sailing 1G | ANI ON OFF Automatic Number identity kk Tum GRIFFON Repeater frequency sailing PEPTIDE BOTECTBOTHIOFF Case 14 | TOT 360 Transmitter Firms-Out Timer 15 |
Lo Loo Devi rein +{-f OFF Shift Direction Repeater Shift 33 | OFFSET {Under VFO mode} 34 | BEEP LIKE BK 826K 28K VFO Step 35 | Nw WIDE NARROW Select Charm! Spacing 36 | SEEK 87.0 i STANCES Scanning 37 | SEEK DORM | / DOCS Scanning Menu Operation 4) Under standby mode, press 38 to sneer menu selling, LCD displays "MENU" 2) Press relate the channel knob to select the desired menu fem, LCD display cement siting of salacity fem. 3) Press £3 to enter and then press B53 or £3 to select the desired effing.
Item Hem Meo. Name 11} Repeatable frequency salting 12 ABETTING time-out timer 15) Busy char! Biog-out 18) VOX with 17) Transmit over besmear 48} Monitor 18) Receive saver 20) Scan mode 4} Dynamiter 57 Confirm Re tum Standby Select Parameter parameter Explanation BOE pen ¥ oe on item Hem Enter Bergen Beetle Parameter Confirm Velum No.
DETAILED FUNCTION DESCRIPTIONS 1) Scan & Scan Mode setting {SCANS SCANS---MENU 1820) Functions: under VFOMR/CH mods, TH-UVBO00D allows you fe scan the entire current operating band and memory channels. Enter Blend 1* and press [| £3 | key to start scanning. When you have started scanning, press key to change direction. And it will halt on a signal it encounters, preach PTT key to slop scanning; Press MINI key to sip scanning temporarily; Press [ €3 | key again to exit the scanning function.
selling separately in each memory. Enter Blend £° to set TX power. High: 10W Low: BW, when you select Low power, the “L’ Leon will appear on the display. 5} Squelch Adjustment (SQL---MENU 5} Functions: TH-UVB000DY's Squelch system allows you to mute the background noise when ne signal is being received. Not only does the Segueing system “standby” operation more pleasant, i ales significantly reduces battery current consumption. Enter Menu 52 to sot SOL level. Default: 5.
14} Transmitter Time-Out Timer (TOT--MENU 14} Functions: the TOT features provides a safely switch which limits transmission to a. per-programivied value. This will promote battery conservation by not allowing you to make excessively-long transmissions, and in the event of 8 stuck PTT switch it can prevent interference to other users as well as battery depletion. Enter Menu 14 to sat TOT.
by manual. 22} Voice Prompt (VOICE--MENU 22) Functions: indispensable voice prompt. Enter Mani 22° to set VOICE. 23} End-tone elimination Enter Menu 23* to switch nonfood the {ail elimination function 24} Power-on Display setting (OPN BASSETERRE SET--MENU 24826826) Functions: chooses power-on display mods and edit power-on massages Enter Mani 24 to sat PROPHETS. Default: OFF. OFF: display mods! version DC: battery power voltage MSG: power-on massage Enter Menu 25° fo check battery village.
Available values: 28) VFO Step selling (STEP--MENU 34) Functions: setting of the synthesizer steps Enter Menu 34° fo set VFO step. Available Values: 0.5/2 5/6/68 5/50/100K. Basic Operations Turing the Radio On/Off Rotate the Ra dip On-OffVolurne Con rel knob until a click is heard fo fum the roadie on/off. Adjusting the Volume After muting the radii on, relate the Radio On-Volumes Control knob clockwise io increase the volume, or counterclockwise to decrease the volumes.
Reverse the frequency Under standby made, long press £3 to tum on this function, "R™ wil displayed at the top of LOD when you tum on this function. At this teems, radio's transmitting frequency is is rec delving one, and its receiving frequency is its transmitting one. If it is been set the CSS! DCE, the code will also been exchanged. MINI MINI: Press and hold this key disables the knolls squelching action allowing you fo hear very weak signals near the background noise level.
Channel Name storage and delete * Channel Storage Under VFO mods, input desired frequency by keypad directly, press 3, then press [9 , the digits blink at the right top of the LOD, paras number to input desired channel directly or press ar £23 or the channel knob io choose desired one, then press for storage. Note: After you input desired chains! number, if iris blinks, it means that this channel is ready occupied, you can choose anther ons. 8g.
3. Sassafras, then press I53, if redo has saved last calling 1D, i will display this none, then key input MDT code, 16 digits in maximum, then pass PTT fo send this 1D. Rots: 1. when key input code, press MON! to celebs last digit, short press CALL to be back to standby mode. 2. in MR mode or CH mess, long press CALL to get 1D of respective channel! of others. 3.
CTCSSMDCS CTCSS 1 67.0 11 84.8 21 13181 1743 | 41 2035 2 68.3 12 97.4 22 1366 | 32 1738 | 42 | 2065 3 718 13 1000 0 23 [1413 33 177.3 | 43 2107 4 744 14 1035 24 1462 | 34 179.9 | 44 | 2181 & ve 18 1072 1 28 | 1514 35 183.5 | 46 | 2287 8 78.7 18 1108 | 26 | 1667 | 36 1862 | 46 | 2281 7 82.8 17 1148 | 27 | 1588 37 189.8 | 47 2338 8 854 18 1188 | 28 | 1622 38 182.8 | 48 | 2418 8 885 18 1230 0 26 [1625 | 38 19686 | 48 | 2503 io #15 20 127.3 | 30 167.
Trouble shooting guide No Electrical Source ¢ The battery has been exhausted. Replace or recharge the battery. # The battery is installed incorrectly. Remove it and install again. The operating ime becomes short, even the battery is fully charged. « Replace the battery. Not able to communicate with the transceivers of the same group. « Confirm the QT/IDQT is the same. # The distance is outside of range. The voles of another group can be heard. @ Change all QT/DAT of the group.