Qcom Technology Inc.
Contents WINDOWS VISTA.......................................................................................2 Install the Bluetooth Driver..........................................................................................................3 Configuring the Broadcom Bluetooth Utility ........................................................................5 Connect to Other Bluetooth Enabled Devices .................................................................................5 Send a file ..........
Windows Vista Install the Bluetooth Driver 1. After you have installed the Bluetooth Module your computer will display a Found New Hardware wizard screen, click Cancel to continue. 2. Under your windows environment, go to Start Æ Control Panel Æ Device Management to check whether Broadcom Bluetooth USB is detected.
3. Go to the directory where the Bluetooth driver stored, double-click Setup icon to begin the installation. 4. Bluetooth Driver is installing. When the screen disappears, the driver install successfully. 5. When you complete the installation, the utility icon will appear on the system tray.
Configuring the Broadcom Bluetooth Utility Connect to Other Bluetooth Enabled Devices  NOTE: Before connecting, make sure that the Bluetooth enabled device you wish to connect to is turned on, 1. On the Notification Area, right-click the Bluetooth Utility icon. 2. Bluetooth Utility Selection screen will be displayed, click Add a Bluetooth Device. 3. Select the My device is set up and ready to be found, and then click “Next”.
4. Select the Bluetooth device that you want to add and click “NEXT”. 5. Select Let me choose my own passkey fill in the passkey and click “NEXT”.
6. The connection now is complete, please click “Finish”.
Send a file 1. Right-click the Bluetooth Utility icon and click Send a File. 2. Click Browse to select a computer or device that you want to send the file and click “Next”.
3. Click Browse to select the file you want to send and then click “Next”. 4. The file transfers successfully, please click “Finish”.
Receive a file 1. Right-click the Bluetooth Utility icon and click Receive a File. 2. Waiting to receive the file.
3. Click “Next” to save in default location. Or click “Browse” to choose the location where you want to save the received file and click “Next”. 4. The file receives successfully, please click “Finish”.
Join a Personal Area Network (PAN) 1. Right-click the Bluetooth Utility icon and click Join a Personal Area Network. 2. Under Bluetooth Devices, select the device that you want to connect to, and then click “Connect”.
Configuration ¾ Devices The Devices tab you can see all the connected Bluetooth devices. Click Add to connect the other Bluetooth device. Click Remove button to delete the Bluetooth device from this list.
¾ Options The Options tab you can change Bluetooth enabled devices settings.
¾ COM ports The COM ports tab you can Add or Remove a COM port for a Bluetooth enabled devices.
¾ Hardware Hardware tab shows the Bluetooth device information.
Uninstalling the Bluetooth Driver 1. For uninstalling the Bluetooth driver, please go to: Start Æ Control Panel Æ Device Management. Then right-click Broadcom Bluetooth USB and select uninstall. 2. On the next screen, select Delete the driver software for this device and then click “OK”.
3. Bluetooth driver is uninstalling. 4. When the Confirm Device Uninstall screen disappears, the Bluetooth driver un-installation complete.
Windows XP Install the Bluetooth Driver 1. After you have installed the Bluetooth Module your computer will display a Found New Hardware wizard screen, click Cancel to continue. 2. Under your windows environment, go to Start Æ Control Panel Æ System Æ Hardware Æ Device Management to check whether Broadcom Bluetooth USB is detected.
3. Right-click the Broadcom Bluetooth USB and select “Update driver”. 4. On Hardware Update Wizard screen, select No, not this time and then click “Next”.
5. Select Install from a list or specific location (Advanced) and click “Next”. 6. Click Browse to select the folder that driver for Broadcom Bluetooth USB and then click “Next”.
7. Bluetooth Driver is installing.
8. Please click “Finish” to complete the Bluetooth installation  NOTE: When you complete the installation, the utility icon will appear on the system tray. If not, it means that the installation failed. Please uninstall the driver and repeat the process.
Configuring the Broadcom Bluetooth Utility Connect to Other Bluetooth Enabled Devices  NOTE: Before connecting, make sure that the Bluetooth enabled device you wish to connect to is turned on, 1. On the Notification Area, right-click the Bluetooth Utility icon. 2. Bluetooth Utility Selection screen will be displayed, click Add a Bluetooth Device.
3. Select the My device is set up and ready to be found, and then click “Next”. 4. Select the Bluetooth device that you want to add and click “NEXT”.
5. Select Let me choose my own passkey fill in the passkey and click “NEXT”. 6. The connection now is complete, please click “Finish”.
Send a file 1. Right-click the Bluetooth Utility icon and click Send a File. 2. Click Browse to select a computer or device that you want to send the file and click “Next”.
3. Click Browse to select the file you want to send and then click “Next”. 4. The file transfers successfully, please click “Finish”.
Receive a file 1. Right-click the Bluetooth Utility icon and click Receive a File. 2. The file is being received.
3. Click “Next” to save in default location. Or click “Browse” to choose the location where you want to save the received file and click “Next”. 4. The file receives successfully, please click “Finish”.
Join a Personal Area Network (PAN) 1. Right-click the Bluetooth Utility icon and click Join a Personal Area Network. 2. Under Bluetooth Devices, select the device that you want to connect to, and then click “Connect”.
Configuration ¾ Devices The Devices tab you can see all the connected Bluetooth devices. Click Add to connect the other Bluetooth device. Click Remove button to delete the Bluetooth device from this list.
¾ Options The Options tab you can change Bluetooth enabled devices settings.
¾ COM ports The COM ports tab you can Add or Remove a COM port for a Bluetooth enabled devices.
¾ Hardware Hardware tab shows the Bluetooth device information.
Uninstalling the Bluetooth Driver 1. For uninstalling the Bluetooth driver, please go to: Start Æ Control Panel Æ System Æ Hardware Æ Device Management. Then right-click Broadcom Bluetooth USB and select uninstall. 2. On the next screen click “OK” to uninstall the driver. 3. When the Confirm Device Removal screen disappears, the Bluetooth driver un-installation complete.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna. 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.
Canadian Regulatory Wireless Notice This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
For NCC 警語 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得 擅自變更頻率、加大功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現 象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依 電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科 學及醫療用電波輻射性電機設備之干擾。 Note: 1. 本模組於取得認證後將依規定於模組本體標示審驗合格標籤 2.
